Metal Seat Gate Valve - Bypass, PN16
Our metal seat wedge gate valves with integral bypass assembly conform to BS5163 / EN1074 and are flanged to EN1092-2 PN10/16.
These valves are suitable for isolation duties with wastewater and sewage, prepared with an ISO5210 interface.
Product Information
Metal Seat Gate Valve - Bypass, PN16
Technical Specification
- Standard: BS 5163 Pt 1&2: 2004, EN1074 Pt 1&2:2000
- Range: DN350 - DN1200
- Flanges & drillings: BS EN 1092- 2:1987 table 9 (PN16)
- Face-to-face dimensions: BS EN 558- 1:1986 table 3, basic series 3
- Maximum working pressure: 16 bar
- Hydrostatic pressure tests:
- Seat - 1.1 x PN (17.6 bar)
- Body - 1.5 x PN (24.0 bar)
- Temperature range: -10°C to 70°C, insulate at 0°C and below
- Coating: Blue fusion bonded epoxy (>300μ and WRAS listed)
Features
- Unique lightweight ductile iron design
- Stem seals replaceable under pressure
- ISO 5210 mounting flange
- Air release as standard
- Clockwise closing stem as standard
- 100% full bore
- Low maintenance design suitable for buried service
- Hand wheel or cap-operated stem
- Bevel or spur gearboxes available
Benefits
- Innovative design
- Cost-effective actuation interface
- Full range of accessories
Applications
Clean Water Treatment Works Datasheets
Related Products
