Specialists in Bespoke Solutions

Extension Spindle DN50-DN300

Extension spindles allow the remote opening and closing of valves when located below ground or in a pit.

T-T's galvanised mild steel valve extended spindles are suitable for most waterworks valves, hydrants and penstocks. 

Terminating in a lower female square taper (35mm x 35mm) and upper male square taper (35mm x 35mm) as defined in BS5163 DN80-DN300.  

Orders placed by 3pm have same working day dispatch and next working day delivery, selected models only

Type Product Code Weight
kg
Datasheet Description Band Price Delivery Status Configure
2000mm Extension Spindle TTF/EXT2000 6.5 kg datasheet 1001 - 2000 mm (One Piece) B
£59.00
1000mm Extension Spindle TTF/EXT1000 4 kg datasheet 300 - 1000 mm (One Piece) B
£53.00
4000mm Extension Spindle TTF/EXT4000 12 kg datasheet 3001 - 4000 mm (Two Piece) B
£119.00
Uni-Joint & Gaiter TTF/UNIJOINT26 1 kg datasheet Universal Joints (Pair) B
£210.00
5000mm Extension Spindle TTF/EXT5000 14.5 kg datasheet 4001 - 5000mm (Two Piece) B
£132.00
3000mm Extension Spindle TTF/EXT3000 9 kg datasheet 2001 - 3000 mm (One Piece) B
£71.00
6000mm Extension Spindle TTF/EXT6000 17 kg datasheet 5001 - 6000 mm (Two Piece) B
£146.00
Type Product Code Weight
kg
Datasheet Description Band Price Delivery Status Configure
2000mm Extension Spindle TTF/EXT2000 6.5 kg datasheet 1001 - 2000 mm (One Piece) B
£59.00
1000mm Extension Spindle TTF/EXT1000 4 kg datasheet 300 - 1000 mm (One Piece) B
£53.00
4000mm Extension Spindle TTF/EXT4000 12 kg datasheet 3001 - 4000 mm (Two Piece) B
£119.00
Uni-Joint & Gaiter TTF/UNIJOINT26 1 kg datasheet Universal Joints (Pair) B
£210.00
5000mm Extension Spindle TTF/EXT5000 14.5 kg datasheet 4001 - 5000mm (Two Piece) B
£132.00
3000mm Extension Spindle TTF/EXT3000 9 kg datasheet 2001 - 3000 mm (One Piece) B
£71.00
6000mm Extension Spindle TTF/EXT6000 17 kg datasheet 5001 - 6000 mm (Two Piece) B
£146.00
Orders placed by 3-00 pm have same working day dispatch and prompt delivery, normally next working day delivery, on selected models only.
Lead time applies

DN: Nominal Diameter

Need help finding the right solution?

Call our Specialist Advisers +44 (0)1630 647200

Product Information

Extension Spindle DN50-DN300

A range of manual, mechanically assisted and powered valve operating equipment developed for remote operation of a wide selection of valves.  These items are engineered to suit both multi and quarter turn valves and those with either rising or non-rising spindle configurations.

Fabricated to specific requirements remote operating equipment is available in painted, galvanised or stainless steel.

Please contact our sales department on +44 (0)1630 647200 for more information on Valve Operating Equipment.

Datasheets