T-T Product Catalogue 2023 by T-T Pumps

www.ttpumps.com / T: +44 (0) 1630 647200

PRODUCT

CATALOGUE Pumps, Controls, Valves, Pumping Systems & Accessories

LIQUIDS UNDER CONTROL

Effective from November 2023

CONTENTS

DELIVERY

3 01

INTRODUCTION

4 01

BUY ONLINE

DRAINAGE PUMPS

7 – 1801

SEWAGE PUMPS

19 – 3801

CONTRACTORS PUMPS

39 – 6001

ENGINE DRIVEN PUMPS

61 – 6401

AGRICULTURAL & ENVIRONMENTAL FEATURING BIOGAS

65 – 8601

POTABLE / CLEAN WATER PUMPS

87– 126 01

INDUSTRIAL / LUBRICANT / FUEL PUMPS

127 – 136 01

PUMP ACCESSORIES

137 – 148 01

WATERWORKS VALVES

149 – 184 01

CONTROL SYSTEMS

185 – 198 01

PUMPING STATIONS

199 – 220 01

INDEX

221 – 227 01

ttpumps.com 2

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

DELIVERY UK & MAINLAND SCOTLAND ≤20kg

≤30kg

≤40kg

≤50kg

≤60kg

≤70kg

≤100kg (Pallet)

Next Working Day

£16.50*

£22.50*

£28.00*

£33.50*

£39.00*

£45.00*

£79.00*

Next Working Day BEFORE 9:30AM

£50.00*

£56.00*

£61.00*

£67.00*

£73.00*

£79.00*

£100.00*

Next Working Day BEFORE 10:30AM

£39.00*

£45.00*

£50.00*

£56.00*

£61.00*

£67.00*

£100.00*

Next Working Day BEFORE 12:00PM

£33.50*

£39.00*

£45.00*

£50.00*

£56.00*

£61.00*

£100.00*

Saturdays - DOES NOT COVER ALL AREAS

£56.00*

£61.00*

£67.00*

£73.00*

£79.00*

£84.00*

£125.00*

DELIVERY SLOT

Please note delivery service not available in all areas.

PALLET RATES WEIGHT

DELIVERY CHARGES

0kg – 250kg

£79.00*

251kg – 500kg

£96.00*

501kg – 1000kg

£106.00*

OPTIONAL EXTRA FOR AM DELIVERY, WEIGHT CHARGE + £20.00 IF AVAILABLE IN POSTCODE AREA

SCOTTISH HIGHLANDS / NORTHERN IRELAND / DUBLIN / EIRE / ISLE OF MAN / SCILLY / ISLE OF WIGHT / CHANNEL ISLANDS WEIGHT

DELIVERY TIME

Scottish Highlands

≤100kg

Isle of Man / Isle of Sicily / Isle of Wight / Channel Islands

DELIVERY CHARGES ≤20kg

21-100kg

2 - 3 Days

£39.00*

+ £1.12* / kg

≤100kg

5 - 7 Days

£50.00*

+ £1.12* / kg

Northern Ireland

≤100kg

5 - 7 Days

£50.00*

+ £1.12*/ kg

+ £4.00*

Dublin / Rep of Ireland

≤100kg

5 - 7 Days

£50.00*

+ £1.12* / kg

+ £29.00*

CUSTOM CHARGES

Please note once weight exceeds 100kg delivery must be via pallet.

MAINLAND EUROPE, WORLDWIDE Price to be advised. Please contact T-T directly to discuss your needs. Please note our minimum order charge is £50.00 + VAT. This is AFTER any discount has been applied to the order and DOES NOT include carriage charges.

DELIVERY BAND

DESTINATION UK & MAINLAND SCOTLAND

DELIVERY CHARGES

ORDER OVER £50.00

FREE OF CHARGE

ORDER OVER £50.00

DELIVERY EXTRA

ORDER OVER £50.00

DELIVERY EXTRA

*Please refer to our website for current prices or ask our sales department.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 3

INTRODUCTION Welcome to our Catalogue Edition 8, in this edition we have added many new product ranges and models. We specialise in not only off-the-shelf pumps, valves and controls but also bespoke pumping solutions, specialist valves that are tailored to meet your exact requirements and custom-made control panels for your specific application. We have thousands of products in our range, which gives us the capacity to meet any challenge in a wide range of industries. So whether you need a water management system for a housing estate, or a sophisticated pumping station for a water treatment plant, trust T-T to deliver a cost-effective solution that is built to last. We have collated our previous product catalogue to give you all the necessary information in one place. However, our website is the most up-to-date source for product information and pricing, with new models regularly added to our portfolio. Our catalogue is split into product sections, from pumps to controls to valves to pumping stations. Our technical information is presented in a table format which includes a quick delivery status reference:

DELIVERY SAME DAY DISPATCH LEAD TIME MAY APPLY ADDITIONAL INFORMATION REQUIRED / BESPOKE BUILT ITEM, CONTACT US FOR MORE INFORMATION

PLEASE NOTE Our website is our most up-to-date, accurate source of information. Scan the QR code to visit us online at www.ttpumps.com

ttpumps.com 4

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

VISIT OUR WEBSITE HERE ARE JUST SOME OF THE REASONS TO VISIT US ONLINE... BUY ONLINE & TECHNICAL SUPPORT — Save an additional 5% off your order

SCAN TO SHOP ONLINE

— Use product codes in the catalogue for easy navigation — Enquire & request quotations — Special offers & bulk-buy promotions — Download datasheets & technical information — How-To guides, videos & case studies

SIGN UP FOR AN ACCOUNT — Personalised dashboard set up to your requirements — View orders & reorder easily — Sign up for our CPD programme, technical drawings and newsletter — Apply for a credit account

T-T PROVIDES...

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 5

Notes

ttpumps.com 6

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Drainage Pumps

SECTION 01 DRAINAGE PUMPS

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 7

TT 100

The TT 100 is a submersible drainage pump for clean water with non-abrasive particles (max. solid bodies: 9mm). It has a stainless steel body, suction grid, motor casing and pump shaft and is ideal for domestic and industrial applications.

PERFORMANCE DATA

10 8 HEAD / m

FEATURES

– Stainless steel construction – Technopolymer impeller – Mechanical seal – IP68 motor and Lipseal – Submersion depth: maximum 5m – Liquid temperature: up to 35°C – Automatic

6 4 2 0

BENEFITS

0.3

0.7

– British design – Built for reliability and long life – Light weight

PUMP TYPE

TT 100 230V/1Ph

1.3

1.7

2.4

CAPACITY / l/sec

PRODUCT CODE

CURVE

TTP/TT100

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

0.15

1¼

6.5

1.8

FREE PASSAGE mm

CABLE m

WEIGHT kg

DELIVERY STATUS SCAN TO SHOP ONLINE

SUMPY

The Sumpy is a fully submersible, automatic sump pump for small water drainage applications. An integral float switch senses the rise and fall in water level and controls the pump automatically. The body and strainer are produced in technopolymer with a stainless steel shaft, fitted with a lipseal and a mechanical seal.

HEAD / m

DRAINAGE PUMPS - 1

Drainage Pumps

FEATURES

– Robust construction – Submersion depth: maximum 5m – Liquid temperature: up to 35°C – IP68 motor

STANDARD

BENEFITS

– Built for reliability and long life – Light weight – Integral level control PUMP TYPE

A 0

0.3

0.7

1.3

1.7

2.3

2.7

3.3

3.7

G 4

D 4.3

CAPACITY / l/sec

VORTEX

PRODUCT CODE

CURVE

SUMPY 30 110V/1Ph TTP/SUMPY30-2 SUMPY 30 230V/1Ph TTP/SUMPY30 SUMPY 75 110V/1Ph TTP/SUMPY75-2 SUMPY 75 230V/1Ph TTP/SUMPY75 SUMPY 100 110V/1Ph TTP/SUMPY100-2 SUMPY 100 230V/1Ph TTP/SUMPY100 SUMPY 150 110V/1Ph TTP/SUMPY150-2 SUMPY 150 230V/1Ph TTP/SUMPY150 SUMPY 75 VORTEX 110V/1Ph TTP/SUMPY75V-2 SUMPY 75 VORTEX 230V/1Ph TTP/SUMPY75V SUMPY 150 VORTEX 110V/1Ph TTP/SUMPY150V-2 SUMPY 150 VORTEX 230V/1Ph TTP/SUMPY150V

ttpumps.com

PERFORMANCE DATA

12 11 10 9 8 7 6 5 4 3 2 1 0

A\ A\ B\ B\ C\ C\ D\ D\ B\ B\ G\ G\

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

2.0 1 2.4 1.2 4.0 1.9 6.0 2.9 2.4 1.2 6.0 2.9

0.1 0.1 0.2 0.2 0.37 0.37 0.68 0.68 0.2 0.2 0.68 0.68

25 25 32 32 40 40 50 50 32 32 50 50

1 1 1¼ 1¼ 1½ 1½ 2 2 1¼ 1¼ 2 2

5 5 5 8 9 9 11 11 8 8 10 10

+44 (0) 1630 647200

SOLIDS CABLE WEIGHT DELIVERY HANDLING m kg STATUS CAPACITY mm l/sec 1.6 1.6 2.9 2.9 3.5 3.5 4.3 4.3 3.3 3.3 4.0 4.0

5x4 5x4 12 x 5 12 x 5 12 x 5 12 x 5 10 x 5 10 x 5 40 x 15 40 x 15 40 x 25 40 x 25

Same day dispatch.

5 5 5 5 5 5 5 5 5 5 5 5

5 5 5.5 5.5 6.5 6.5 6.8 6.8 5 5 7 7

SCAN TO SHOP ONLINE

Lead time may apply.

SAMSUMP

The Samsump is a robust sump pump constructed in fibrereinforced plastic, giving resistance to corrosion. It is ideal for permanent installation where reliable automatic operation is essential.

PERFORMANCE DATA

10 8 HEAD / m

FEATURES

– Constructed of fibre-reinforced plastic – Mechanical seal and Lipseal – 9mm solids handling – 0.25kW output – 40mm vertical discharge – Pond safe suction

6 4 2

BENEFITS

– Built for reliability and long life – Lightweight – Readily available

0.8

1.7

2.5

3.3

CAPACITY / l/sec

PRODUCT CODE

PUMP TYPE

DRAINAGE PUMPS - 1

Drainage Pumps

CURVE

SAMSUMP 230V/1Ph TTP/SAMSUMP

OUTPUT

DISCHARGE

amp

inch

HEAD m

MAXIMUM CAPACITY l/sec

1.3

0.25

1½

7.5

FREE PASSAGE mm

CABLE m

WEIGHT DELIVERY kg STATUS SCAN TO SHOP ONLINE

DR STEEL

The DR Steel is a sturdy range of submersible drainage pumps made from stainless steel, the DR steel has a multi-channel open impeller for applications with clear or grey waste waters and the standard pump is available in automatic. Manual versions are available on request. HEAD / m

FEATURES

– Twin mechanical seal – Stainless steel construction – Open multi-channel impeller in 304 stainless steel – 2 pole motor – G1 ¼”- G1 ½ vertical discharge – 12mm maximum free passage – 16m maximum head – Operating temperature 40°C (can operate at 90°C for up to 3 minutes) – Automatic as standard

18 16 14 12 10 8 6 4 2 0

PERFORMANCE DATA

1.7

3.3

6.7

CAPACITY / l/sec

BENEFITS

– Built for reliability and long life – Lightweight – Popular product PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT DELIVERY kg STATUS

amp

inch

HEAD m

CAPACITY l/sec

1¼

8.5

5.9

DRSTEEL 25 230V/1Ph PZ/DRSTEEL25/1

2.3

0.25

DRSTEEL 37 230V/1Ph PZ/DRSTEEL37/1

3.1

0.37

1¼

2.6

6.3

DRSTEEL 55 230V/1Ph PZ/DRSTEEL55/1

4.3

0.55

1½

12.5

7.7

DRSTEEL 75 230V/1Ph PZ/DRSTEEL75/1

5.6

0.75

1½

5.6

8.4

DRSTEEL 75 400V/3Ph PZ/DRSTEEL75T/3

2.4

0.75

1½

5.6

8.4

Same day dispatch.

Lead time may apply.

ttpumps.com

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 9

GOLIATH SUPER

The Goliath Super is a robust sump pump made of stainless steel plate and fibrereinforced plastic, resistant to corrosion.

PERFORMANCE DATA

12 10

It also features a vortex impeller, giving up to 35mm solids handling. Maximum depth of submersion is 10m, minimum sump 250mm x 250mm.

HEAD / m

FEATURES

– Stainless steel outer casing and reinforced plastic construction (150, 250 and 400 versions) cast iron volute and impeller (550 and 750 versions) – Double mechanical seal – Interchangeable horizontal and vertical discharge – Built in air relief valve on all models – Automatic as standard but can be converted to manual upon request (except 400V versions) – 40°C operating temperature

6 4 2 0

MANUAL

C B

A 0

100

200

300

400

500

CAPACITY / l/min

BENEFITS

– British design – Built for reliability and long life – Double mechanical seal – Easy to maintain and repair – Light weight – Popular product

SCAN TO SHOP ONLINE

A FLOAT

AUTOMATIC

PUMP TYPE

MANUAL

DRAINAGE PUMPS - 1

Drainage Pumps

OPERATION CURVE

OUTPUT

DISCHARGE

amp

inch

HEAD CAPACITY m l/sec

MAXIMUM

Z FLOAT FREE CABLE WEIGHT DELIVERY PASSAGE m kg STATUS mm

GOLIATH SUPER 150 230V/1Ph

TTP/GOLIATHS1/1-A

A FLOAT

1.7

0.15

6.3

4.1

GOLIATH SUPER 150 230V/1Ph

TTP/GOLIATHS1/1-F

F FLOAT

1.7

0.15

6.3

4.1

GOLIATH SUPER 150 230V/1Ph

TTP/GOLIATHS1/1-Z

Z FLOAT

1.7

0.15

6.3

4.1

GOLIATH SUPER 150 110V/1Ph

TTP/GOLIATHS1/2-A

A FLOAT

3.0

0.15

6.3

4.1

GOLIATH SUPER 150 110V/1Ph

TTP/GOLIATHS1/2-F

F FLOAT

3.0

0.15

6.3

4.1

GOLIATH SUPER 150 110V/1Ph

TTP/GOLIATHS1/2-Z

Z FLOAT

3.0

0.15

6.3

4.1

GOLIATH SUPER 250 230V/1Ph

TTP/GOLIATHS2/1-A

A FLOAT

2.5

0.25

7.5

GOLIATH SUPER 250 230V/1Ph

TTP/GOLIATHS2/1-F

F FLOAT

2.5

0.25

7.5

8.5

GOLIATH SUPER 250 230V/1Ph

TTP/GOLIATHS1/1-Z

Z FLOAT

2.5

0.25

7.5

8.5

GOLIATH SUPER 400W 230V/1Ph

TTP/GOLIATHS3/1-A

A FLOAT

3.2

0.4

9.2

GOLIATH SUPER 550W 230V/1Ph

TTP/GOLIATHS4/1-A

A FLOAT

3.6

0.55

7.2

GOLIATH SUPER 750W 230V/1Ph

TTP/GOLIATHS5/1-A

A FLOAT

6.6

0.75

11.5

8.3

GOLIATH SUPER 250W 110V/1Ph

TTP/GOLIATHS2/2-A

A FLOAT

4.5

0.25

7.5

GOLIATH SUPER 150W 110V

TTP/GOLIATHS1/2

MANUAL

2.8

0.15

6.3

4.1

GOLIATH SUPER 150W 230V

TTP/GOLIATHS1/1

MANUAL

1.7

0.15

6.3

4.1

0.15

GOLIATH SUPER 250W 230V

TTP/GOLIATHS2/1

MANUAL

2.5

0.25

7.5

0.25

GOLIATH SUPER 400W 400V/1Ph

TTP/GOLIATHS3/2

MANUAL

1.4

0.4

9.2

GOLIATH SUPER 550W 400V/1Ph

TTP/GOLIATHS4/2

MANUAL

1.6

0.55

7.2

GOLIATH SUPER 750W 400V/3Ph

TTP/GOLIATHS5/2

MANUAL

2.5

0.75

11.5

8.3

ttpumps.com 10

PRODUCT CODE

F FLOAT

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

DR BLUE PROFESSIONAL

Designed for domestic and professional use, the DR Blue Pro range of submersible pumps have an open multi-channel impeller for mostly clear or slightly soiled wastewater.

PERFORMANCE DATA

FEATURES

15 HEAD / m

– Cast iron construction and impeller – Double mechanical seal within an oil bath – Automatic as standard but can be converted to manual upon request – Other models available in 110V by request – Auto-coupling available on request – 40°C operating temperature

10 B

5 0

1.4

2.8

4.2

5.6

BENEFITS

8.3

9.7

13.9

Q / l/sec

– Built for reliability and long life – Double mechanical seal – Easy to maintain and repair

SCAN TO SHOP ONLINE

PRODUCT CODE

CURVE

DR BLUE PRO 50/2/G32 230V/1Ph

PZ/1094.005

DR BLUE PRO 50/2/G32 400V/3Ph

PUMP TYPE

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

4.5

8.4

4.5

1¼

11.8

4.6

13.5

1¼

11.8

4.6

13.5

0.55

1¼

11.8

4.6

13.5

5.6

0.74

1¼

14.1

5.0

2.2

0.74

1¼

14.1

5.0

PZ/1106.006

1.1

13.5

10.2

30 x 10

DR BLUE PRO 150/2/G50 230V/1Ph

PZ/1106.005

7.5

1.1

13.5

10.2

30 x 10

DR BLUE PRO 150/2/G50 400V/3Ph

PZ/1107.002

3.2

1.1

13.5

10.2

30 x 10

DR BLUE PRO 200/2/G50 230V/1Ph

PZ/1108.004

1.5

16.2

11.5

30 x 10

DR BLUE PRO 200/2/G50 400V/3Ph

PZ/1109.002

4.3

1.5

16.2

11.5

30 x 10

amp

inch

HEAD m

CAPACITY l/sec

2.8

0.37

1¼

8.4

PZ/1096.004

1.1

0.37

1¼

DR BLUE PRO 75/2/G32 110V/1Ph

PZ/1098.011

8.6

0.55

DR BLUE PRO 75/2/G32 230V/1Ph

PZ/1098.005

4.1

0.55

DR BLUE PRO 75/2/G32 400V/3Ph

PZ/1100.004

1.6

DR BLUE PRO 100/2/G32 230V/1Ph

PZ/1090.005

DR BLUE PRO 100/2/G32 400V/3Ph

PZ/1092.004

DR BLUE PRO 150/2/G50 110V/1Ph

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 11

DRAINAGE PUMPS - 1

Drainage Pumps

DRO RANGE

The DRO range of small drainage pumps is ideal for domestic and industrial use, with the pumps featuring cast iron construction, heavy-duty bearings and a double silicon carbide mechanical seal, within an oil bath. These pumps have a horizontal outlet.

HEAD / m

DRAINAGE PUMPS - 1

Drainage Pumps

FEATURES

– Cast iron construction – Double mechanical seal within oil bath – Vertical discharge on 50 & 75 and horizontal discharge on 100, 150 & 200 models – Auto-coupling available – Threaded flange on horizontal discharge models – Maximum temperature: 40°C

20 18 16 14 12 10 8 6 4 2 0

PERFORMANCE DATA

CAPACITY / l/sec

BENEFITS

– Built for reliability and long life – Double mechanical seal – Easy to maintain and repair – Popular product SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

DRO 50/2/G32V 230V/1Ph

PZ/DRO50/2/1

DRO 50/2/G32V 400V/3Ph DRO 75/2/G32V 230V/1Ph

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg 15

amp

inch

HEAD m

CAPACITY l/sec

2.9

0.37

1¼

8.5

4.5

PZ/DRO50/2/3

1.1

0.37

1¼

8.5

4.5

PZ/DRO75/2/1

3.9

0.55

1¼

12.1

15.5

DRO 75/2/G32V 400V/3Ph

PZ/DRO75/2/3

1.4

0.55

1¼

12.1

15.5

DRO 100/2/G50H 230V/1Ph

PZ/0021.002

6.5

0.9

12.0

9.4

19.5

DRO 100/2/G50H 400V/3Ph

PZ/0022.002

2.3

0.9

12.0

9.4

19.5

DRO 150/2/G50H 230V/1Ph

PZ/0025.002

8.2

1.1

15.8

20.5

DRO 150/2/G50H 400V/3Ph

PZ/0026.002

2.7

1.1

15.8

20.5

DRO 200/2/G50H 230V/1Ph

PZ/0029.002

9.3

1.5

17.8

21.5

DRO 200/2/G50H 400V/3Ph

PZ/0030.003

3.6

1.5

17.8

21.5

DELIVERY STATUS

Please note: Does not come automatic as standard. Float option only available on single phase up to 8 Amp FLC (Float ref. PZS/ZENIT-FLOAT)

ttpumps.com 12

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

DR BRONZE

The DR Bronze range of small drainage pumps is ideal for heavyduty use. These pumps are constructed in B-10 Bronze and incorporate heavy-duty bearings and a double silicon-carbide mechanical seal (+Viton gaskets). HEAD / m

FEATURES

18 16 14 12 10 8 6 4 2 0

– Bronze construction – Double mechanical seal within oil bath – Automatic version available on request – Auto-coupling available (GSL-250)

BENEFITS

– Built for reliability and long life – Double mechanical seal – Easy to maintain and repair

PERFORMANCE DATA

D A

DELIVERY STATUS

CAPACITY / l/sec

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

DRB 50/2/G32V 230V/1Ph

PZ/DRB50/2/1

DRB 50/2/G32V 400V/3Ph

PZ/DRB50/2/3

DRB 75/2/G32V 230V/1Ph

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

4.4

amp

inch

HEAD m

CAPACITY l/sec

2.9

0.37

1¼

8.3

1.1

0.37

1¼

8.3

PZ/DRB75/2/1

3.9

0.55

1¼

11.8

DRB 75/2/G32V 400V/3Ph

PZ/DRB75/2/3

1.4

0.55

1¼

11.8

DRB 100/2/G50V 230V/1Ph

PZ/DRB100/2/1

6.5

0.88

11.8

9.5

DRB 100/2/G50V 400V/3Ph

PZ/DRB100/2/3

2.3

0.88

11.8

9.5

DRB 150/2/G50V 230V/1Ph

PZ/DRB150/2/1

8.2

1.1

15.5

11.8

DRB 150/2/G50V 400V/3Ph

PZ/DRB150/2/3

2.7

1.1

15.5

11.8

DRB 200/2/G50V 230V/1Ph

PZ/DRB200/2/1

9.3

1.5

17.5

12.5

DRB 200/2/G50V 400V/3Ph

PZ/DRB200/2/3

3.6

1.5

17.5

12.5

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 13

DRAINAGE PUMPS - 1

Drainage Pumps

DRG RANGE

The DRG range features a channel impeller and redesigned hydraulics and motor to guarantee high performance, low consumption and outstanding versatility. These pumps are suitable for recirculation of industrial process waters and civil lifting.

PERFORMANCE DATA

60 50

FEATURES

– Cast iron construction – Three-phase motor – Insulation: Class H (180ºC) – Protection rating: IP68 – 50Hz and 60Hz versions – Thermal protection incorporated in stator – AISI 431 drive shaft – Two silicon carbide mechanical seals – Large free passage – Discharge from DN40 to DN250

HEAD / m

DRAINAGE PUMPS - 1

Drainage Pumps

40 30 20 10 0

BENEFITS

DRG 250/2/65 B0AT 400V/3Ph DRG 300/2/65 A0ET 400V/3Ph DRG 400/2/65 A0ET 400V/3Ph DRG 250/2/80 L0AT 400V/3Ph DRG 300/2/80 E0ET 400V/3Ph DRG 400/2/80 E0ET5 400V/3Ph DRG 550/2/80 P0FT5 400V/3Ph DRG 550/2/80 B0FT 400V/3Ph DRG 750/2/80 A0FT 400V/3Ph DRG 750/2/80 B0FT 400V/3Ph DRG 1000/2/80 A0FT 400V/3Ph DRG 1000/2/80 B0FT 400V/3Ph DRG 200/4/80 M0ET 400V/3Ph DRG 300/4/80 G0ET5 400V/3Ph DRG 400/4/80 H0ET 400V/3Ph DRG 550/4/80 D0FT5 400V/3Ph DRG 750/4/80 D0FT 400V/3Ph DRG 200/4/100 T0ET 400V/3Ph DRG 300/4/100 U0ET5 400V/3Ph DRG 400/4/100 U0ET5 400V/3Ph DRG 550/4/100 R0FT5 400V/3Ph DRG 1200/2/80 A0GT 400V/3Ph DRG 1200/2/80 B0GT 400V/3Ph DRG 1500/2/80 A0GT 400V/3Ph DRG 1500/2/80 B0GT 400V/3Ph DRG 2000/2/80 G0HT 400V/3Ph DRG 2500/2/80 G0HT 400V/3Ph DRG 1000/4/80 DOGT 400V/3Ph DRG 1200/4/80 D0HT 400V/3Ph DRG 1200/4/100 H0HT 400V/3Ph DRG 1500/4/100 A0HT 400V/3Ph DRG 2000/4/100 A0HT 400V/3Ph DRG 2000/4/100 B0HT 400V/3Ph DRG 1200/4/150 A0HT 400V/3Ph DRG 1500/4/150 A0HT 400V/3Ph DRG 2000/4/150 A0HT 400V/3Ph DRG 1200/4/200 B0HT 400V/3Ph DRG 1500/4/200 B0HT 400V/3Ph DRG 2000/4/200 B0HT 400V/3Ph DRG 1200/4/250 H0HT 400V/3Ph DRG 1500/4/250 H0HT 400V/3Ph DRG 2000/4/250 H0HT 400V/3Ph DRG 1000/6/200 A0HT 400V/3Ph DRG 1000/6/200 B0HT 400V/3Ph DRG 1750/6/200 A0HT 400V/3Ph DRG 1000/6/250 C0HT 400V/3Ph DRG 1000/6/250 H0HT 400V/3Ph DRG 1750/6/250 C0HT 400V/3Ph

100

120

140

160

180

200

CAPACITY / l/sec SCAN TO SHOP ONLINE

– Built for reliability and long life – Great solids handling capacity – Fully repairable PUMP TYPE

PRODUCT CODE

CURVE

PZ/1760.001 PZ/1431.003 PZ/1433.002 PZ/1759.001 PZ/1457.005 PZ/1458.003 PZ/1540.002 PZ/1503.002 PZ/1501.003 PZ/1505.003 PZ/1502.002 PZ/1504.002 PZ/1471.002 PZ/1463.002 PZ/1466.002 PZ/1523.002 PZ/1524.002 PZ/1472.002 PZ/1468.002 PZ/1469.002 PZ/1521.002 PZ/1900.003 PZ/1902.003 PZ/1901.003 PZ/1903.003 PZ/1677.002 PZ/1678.003 PZ/1904.003 PZ/1676.001 PZ/1657.003 PZ/1658.001 PZ/1659.001 PZ/1675.001 PZ/1660.001 PZ/1661.001 PZ/1662.001 PZ/1666.001 PZ/1667.001 PZ/1669.001 PZ/1671.001 PZ/1672.001 PZ/1673.001 PZ/1663.001 PZ/1670.001 PZ/1664.001 PZ/1665.001 PZ/1674.001 PZ/1668.001

A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\ A\

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

3.7 4.6 6.4 3.7 4.6 6.3 7.7 7.7 10.8 10.8 13.7 13.7 3.4 5.1 6.7 8.4 11.8 3.4 5.2 6.7 8.4 16.1 16.1 19.5 19.5 26.2 32.9 15.8 17 17 20.5 30.8 30.8 17 20.5 30.8 17 20.5 30.8 17 20.5 30.8 15.7 15.7 27.6 15.7 15.7 27.6

1.8 2.2 3.0 1.8 2.2 3.0 4.0 4.0 5.5 5.5 7.5 7.5 1.5 2.2 3.0 4.0 5.5 1.5 2.2 3.0 4.0 9.0 9.0 11.0 11.0 15.0 18.5 7.5 9.0 9.0 11.0 15.0 15.0 9.0 11.0 15.0 9.0 11.0 15.0 9.0 11.0 15.0 7.5 7.5 13.6 7.5 7.5 13

65 65 65 80 80 80 80 80 80 80 80 80 80 80 80 80 80 100 100 100 100 80 80 80 80 80 80 80 80 100 100 100 100 150 150 150 200 200 200 250 250 250 200 200 200 250 250 250

2½ 2½ 2½ 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 3 3 3 3 3 3 3 3 4 4 4 4 6 6 6 8 8 8 10 10 10 8 8 8 10 10 10

16.7 17.9 22.8 17 18.4 23.2 24 17 25 22 34 30.9 8.3 12 14 12.5 16.5 8.7 9.5 11.4 13 42.8 35 46.5 41.7 45 48.3 22 24.6 22.4 18.2 26.6 20.7 13 17.1 26.1 11.9 13.9 18.1 11.3 13.3 18.1 12.2 14.4 17.2 11.5 13.6 16.5

22 24 26 24 24 28 30 36 40 40 45 48 19 32 34 52 58 30 38 41 63 46 50 44 48 44 48 54 56 80 85 90 100 120 120 140 160 170 170 180 185 205 140 140 175 144 150 192

FREE PASSAGE mm

CABLE m

WEIGHT kg

35 x 30 40 x 35 40 x 35 35 x 30 40 x 35 40 x 35 40 x 35 55 x 50 40 55 x 50 40 55 x 50 45 75 75 65 x 60 65 x 60 45 60 60 65 40 55 x 50 40 55 x 50 75 75 65 x 60 65 x 60 80 80 80 80 80 80 80 80 80 80 80 80 80 100 x 70 80 100 x 70 100 x 70 80 100 x 70

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

34 44 47 36 45 48 63.6 68 71 71 79 79 55 60.2 61 110 110 58 63.2 64 90 104 104 105 105 155 165 141 183 195 200 212 212 212 212 224 239 239 251 270 270 282 276 239 293 302 270 319

DELIVERY STATUS

Please note: DN40 - DN50 models available online, scan QR code to shop. Many models are available with ATEX rated motors, please enquire with our sales department for more information.

ttpumps.com 14

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

DRY RANGE

The DRY range of large, AISI 316 stainless steel drainage pumps feature open twin-channel impellers, double mechanical seals within an oil bath and an oil-filled motor.

These pumps are specifically designed for use with chemically aggressive liquids.

PERFORMANCE DATA

HEAD / m

FEATURES

– 316 Cast Stainless Steel construction – Double mechanical seal in silcon carbide (2SIC) – Auto-coupling available in AISI 316

25 20 15 10

BENEFITS

– Built for reliability and long life – Easy to maintain and repair – Great solids handling capacity – Quality build

A 0

D 40

G 50

CAPACITY / l/sec

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

FREE PASSAGE mm

CABLE m

WEIGHT kg

DRY 300/2/80 400V/3Ph

PZ/0101.001

6.0

2.7

13.5

28.7

DRY 400/2/80 400V/3Ph

PZ/0103.001

8.0

3.6

15.7

32.3

DRY 550/2/80 400V/3Ph

PZ/0104.001

10.1

4.9

17.2

36.4

DRY 750/2/80 400V/3Ph

PZ/0105.001

14.5

7.2

21.4

42.8

104

DRY 1000/2/80 400V/3Ph

PZ/0106.001

19.8

10.0

27.8

50.1

110

DRY 1500/2/80 400V/3Ph

PZ/0108.001

28.2

15.0

38.3

58.7

130

DRY 1000/2/100 400V/3Ph

PZ/0107.001

19.8

10.0

100

22.3

61.5

115

DRY 1500/2/100 400V/3Ph

PZ/0109.001

28.2

15.0

100

31.1

72.8

144

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 15

DRAINAGE PUMPS - 1

Drainage Pumps

AP BLUE PROFESSIONAL

The AP Blue Pro range of submersible pumps with high-head cast iron impeller is ideal for clean water, rainwater, seepage water and for sandy/muddy water containing particles no larger than 6mm in suspension.

These pumps are specifically designed for domestic and professional use.

PERFORMANCE DATA

25 HEAD / m

DRAINAGE PUMPS - 1

Drainage Pumps

FEATURES

– Cast iron construction & impeller – Double mechanical seal within oil bath – Automatic as standard, float removed on request – Auto-coupling available

15 10

5 0

BENEFITS

CAPACITY / l/sec

– Built for reliability and long life – Double mechanical seal – Easy to maintain and repair – Popular product SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

AP BLUE PRO 100/2/G40H 230V/1Ph

PZ/1110.002

AP BLUE PRO 100/2/G40H 400V/3Ph

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

6.2

16.9

6.2

1½

20.4

6.8

1½

20.4

6.8

1.5

1½

26.1

7.1

1.5

1½

26.1

7.1

amp

inch

HEAD m

CAPACITY l/sec

5.5

0.74

1½

16.9

PZ/1111.001

2.7

0.74

1½

AP BLUE PRO 150/2/G40H 230V/1Ph

PZ/1112.002

7.5

1.1

AP BLUE PRO 150/2/G40H 400V/3Ph

PZ/1113.001

3.2

1.1

AP BLUE PRO 200/2/G40H 230V/1Ph

PZ/1114.002

AP BLUE PRO 200/2/G40H 400V/3Ph

PZ/1115.001

4.3

DELIVERY STATUS

Please note: For high head requirements see our APG range. (Page 17)

ttpumps.com 16

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

APG RANGE

The APG Submersible range of large, cast iron construction drainage pumps feature open twin-channel impellers, double mechanical seals within an oil bath and an oil-filled motor.

PERFORMANCE DATA

60 50 HEAD / m

These pumps are specifically designed for use with chemically aggressive liquids.

FEATURES

– Double mechanical seal within oil bath – Auto-coupling available in AISI 316 and GSL – 250 cast iron

40 30

F C

BENEFITS

– Built for reliability and long life – Double mechanical seal – Easy to maintain and repair – Quality build – High head

CAPACITY / l/sec

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

APG 250/2/G40H 400V/3Ph

PZ/1758.001

APG 300/2/G50H 400V/3Ph APG 400/2/G50H 400V/3Ph

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

3.7

1.8

1½

7.2

PZ/1464.002

4.6

2.2

7.6

43.2

PZ/1473.002

6.4

3.0

6.6

APG 550/2/G50H 400V/3Ph

PZ/1525.002

7.7

4.0

8.9

57.6

APG 750/2/G50H 400V/3Ph

PZ/1508.002

10.8

5.5

10.6

60.3

APG 1000/2/G50H 400V/3Ph

PZ/1509.002

13.7

7.5

10.5

68.2

DELIVERY STATUS

Please note: 150 - 200 models available online, scan QR code to shop. Many models are available with ATEX rated motors, please enquire with our sales department for more information.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 17

DRAINAGE PUMPS - 1

Drainage Pumps

Notes

ttpumps.com 18

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Sewage Pumps

SECTION 02 SEWAGE PUMPS

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 19

DG STEEL

The DG Steel is a sturdy submersible pump made from stainless steel.

PERFORMANCE DATA

The vortex impeller gives good solids handling of 25mm up to 40mm, ideal for handling waste water with small solids.

The standard pump is automatic and manual versions are available on request.

HEAD / m

SEWAGE PUMPS - 2

Sewage Pumps

FEATURES

– Twin mechanical seal – Stainless steel construction – Vortex impeller in 304 stainless steel – Operating temperature 40°C – Automatic as standard

8 6 4 2 0

1.7

3.3

6.6

CAPACITY / l/sec

BENEFITS

– Designed for reliability and long life – Great solids handling capacity – Lightweight – Popular product SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT

DISCHARGE

amp

MAXIMUM

inch

HEAD m

CAPACITY l/sec

FREE PASSAGE mm

CABLE m

WEIGHT kg

DGSTEEL 37 230V/1Ph

PZ/DGSTEEL37/1

3.1

0.37

1¼

8.1

3.08

6.6

DGSTEEL 55 230V/1Ph

PZ/DGSTEEL55/1

4.3

0.55

1½

5.5

8.1

DGSTEEL 75 230V/1Ph

PZ/DGSTEEL75/1

5.6

0.75

1½

9.6

6.33

8.9

DGSTEEL 75 400V/3Ph PZ/DGSTEEL75T/1

2.4

0.75

1½

9.6

6.33

8.9

DELIVERY STATUS

RELATED PRODUCTS:

SUCTION-DELIVERY HOSE Heavy duty range of ribbed suction hose that is designed for temporary and fixed applications.

ttpumps.com 20

HOSE BANDS (ZINC PLATED) LAYFLAT HOSE Excellent durability and good corrosion resistance, whilst ensuring that your hose is securely held.

+44 (0) 1630 647200

BRASS HOSETAIL (BSP THREAD) BSP Male / Female Hose Tail manufactured in brass for durability. For either suction or delivery connections.

Same day dispatch.

Lead time may apply.

DG BLUE PROFESSIONAL

Designed for domestic and professional use, the DG Blue Pro range of sewage pumps are suitable for pumping polluted water with suspended solid particles.

PERFORMANCE DATA

The cast iron vortex impeller gives great performance in terms of flow rate and head, including integral free passage of up to 50mm.

HEAD / m

FEATURES

– Cast iron construction and impeller – Double mechanical seal within an oil bath – Automatic as standard, float removed on request – Other models available in 110V by request – Auto-coupling available on request

10 5 0

C A

CAPACITY / l/sec

BENEFITS

– Designed for reliability and long life – Double mechanical seal – Great solids handling capacity – Popular product SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

DG BLUE PRO 50/2/G40 230V/1Ph

PZ/1082.005

DG BLUE PRO 50/2/G40 400V/3Ph

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

5.2

6.5

5.2

1½

9.5

6.8

1½

9.5

6.8

0.55

1½

9.5

6.8

5.6

0.74

1½

7.5

15.5

2.2

0.74

1½

7.5

15.5

PZ/1102.006

15.1

1.1

11.6

DG BLUE PRO 150/2/G50 230V/1Ph

PZ/1102.005

7.5

1.1

11.6

DG BLUE PRO 150/2/G50 400V/3Ph

PZ/1103.002

3.2

1.1

11.6

DG BLUE PRO 200/2/G50 230V/1Ph

PZ/1104.004

1.5

14.6

11.5

DG BLUE PRO 200/2/G50 400V/3Ph

PZ/1105.002

4.3

1.5

14.6

11.5

amp

inch

HEAD m

CAPACITY l/sec

2.8

0.37

1½

6.5

PZ/1084.004

1.1

0.37

1½

DG BLUE PRO 75/2/G40 110V/1Ph

PZ/1086.011

8.3

0.55

DG BLUE PRO 75/2/G40 230V/1Ph

PZ/1086.005

4.1

0.55

DG BLUE PRO 75/2/G40 400V/3Ph

PZ/1088.004

1.6

DG BLUE PRO 100/2/G40 230V/1Ph

PZ/1078.005

DG BLUE PRO 100/2/G40 400V/3Ph

PZ/1079.004

DG BLUE PRO 150/2/G50 110V/1Ph

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 21

SEWAGE PUMPS - 2

Sewage Pumps

DGO RANGE

The DGO range of heavy-duty, cast iron submersible pumps is fitted with a vortex impeller to allow good free passage making it suitable for heavily polluted liquids, sewage and liquids containing fibrous materials.

FEATURES

HEAD / m

SEWAGE PUMPS - 2

Sewage Pumps

– Cast iron construction – Double mechanical seal within an oil bath – Auto-coupling available – 50mm flanged and 50mm BSP threaded discharge, 80mm flanged discharge only

BENEFITS

– Designed for reliability and long life – Easy to maintain and repair – Great solids handling capacity

18 16 14 12 10 8 6 4 2 0

PERFORMANCE DATA

C D

CAPACITY / l/sec

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

DGO 50/2/G50H 230V/1Ph

PZ/0970.011

DGO 50/2/G50H 400V/3Ph DGO 75/2/G50H 230V/1Ph DGO 75/2/G50H 400V/3Ph

PZ/0973.007

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

2.9

0.37

6.3

16.5

PZ/0971.004

1.1

0.37

6.3

16.5

PZ/0970.012

3.9

0.55

8.4

7.2

16.5

1.4

0.55

8.4

7.2

16.5

DGO 100/2/G50H 230V/1Ph PZ/DGO100H/2/1

6.5

0.88

11.6

9.5

19.5

DGO 100/2/G50H 400V/3Ph PZ/DGO100H/2/3

2.3

0.88

11.6

9.5

19.5

DGO 150/2/G50H 230V/1Ph PZ/DGO150H/2/1

8.2

1.1

13.2

10.5

20.5

DGO 150/2/G50H 400V/3Ph PZ/DGO150H/2/3

2.5

1.1

13.2

10.5

20.5

DGO 200/2/G50H 230V/1Ph

PZ/DGO200M/1

9.3

1.5

21.5

DGO 200/2/G50H 400V/3Ph

PZ/DGO200T/3

3.6

1.5

21.5

DGO 100/4/G50H 230V/1Ph PZ/DGO100H/4/1

5.7

0.7

4.9

8.5

DGO 100/4/G50H 400V/3Ph

PZ/0482.007

2.2

0.7

4.9

8.5

DGO 200/2/80 230V/1Ph

PZ/DGO200/80/1

11.2

1.7

DGO 200/2/80 400V/3Ph

PZ/DGO200/80/3

3.9

1.7

DELIVERY STATUS

Please note: Does not come automatic as standard. Float option only available on single phase up to 8 Amp FLC (Float ref. PZS/ZENIT-FLOAT)

ttpumps.com 22

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

DGX STAINLESS STEEL

The DGX range of full 316 stainless steel submersible pumps are designed for domestic and professional use.

PERFORMANCE DATA

Suitable for treatment water and water polluted with suspended solid particles providing excellent corrosion resistance.

The stainless steel vortex impeller gives a great performance in terms of flow rate and head, including integral free passage of up to 38mm.

FEATURES

HEAD / m

12 8 6 4

– AISI316 cast stainless steel construction – Double mechanical seal within an oil bath – 38mm solids handling – 50mm vertical discharge

2 0

DELIVERY STATUS

CAPACITY / l/sec

BENEFITS

– Designed for reliability and long life – Easy to maintain and repair – Great solids handling capacity – Corrosion resistant SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

DGX 50/2/G50V 230V/1Ph

PZ/0188.001

DGX 50/2/G50V 400V/3Ph DGX 75/2/G50V 230V/1Ph

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

2.9

0.37

PZ/0189.001

1.1

0.37

PZ/0190.001

3.9

0.55

7.9

DGX 75/2/G50V 400V/3Ph

PZ/0191.001

1.4

0.55

7.9

DGX 100/2/G50V 230V/1Ph

PZ/0192.001

6.5

0.88

11.6

8.8

DGX 100/2/G50V 400V/3Ph

PZ/0193.001

2.3

0.88

11.6

8.8

DGX 150/2/G50V 230V/1Ph

PZ/0196.001

8.2

1.1

12.5

8.8

DGX 150/2/G50V 400V/3Ph

PZ/0197.001

2.7

1.1

12.5

8.8

DGX 200/2/G50V 230V/1Ph

PZ/0200.001

9.3

1.5

13.7

10.6

DGX 200/2/G50V 400V/3Ph

PZ/0201.001

3.6

1.5

13.7

10.6

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 23

SEWAGE PUMPS - 2

Sewage Pumps

GREY RANGE

The Grey range of electric submersible pumps feature completely redesigned hydraulics and motors, guaranteeing high performance and low costs. The Grey Range is the ideal solution for pumping clear and effluent wastewater.

SCAN TO SHOP ONLINE

FEATURES

– Cast iron structure – Three-phase motor from 0.37kW to 18.5 kW – Insulation: class H (180°C) – Protection rating: IP68 – 50 Hz and 60 Hz versions – Thermal protection devices incorporated in stator – AISI 431 drive shaft – Two silicon carbide mechanical seals in large oil chamber – Discharge from DN32 to DN250 – Large free passage – ATEX versions available on request PERFORMANCE DATA

PERFORMANCE DATA

50 50 40 40 30

HEAD / m

SEWAGE PUMPS - 2

Sewage Pumps

10 0

100

120

140

160

180

200

CAPACITY / l/sec

DRG

CAPACITY / l/sec

DGG

APG

GRG

INSTALLATION TYPES A full range of accessories supplied as standard simplifies any installation. FREE installation

Installation with BOTTOM COUPLER

BOTTOM COUPLERS – Cast iron body – steel metal fasteners – Vertical and horizontal discharge – DN 65 ÷ DN 250

DISCHARGE BENDS – In cast iron or galvanised steel – Full free passage – DN 65 ÷ DN 250

BALL CHECK VALVES – Cast iron body – steel metal fasteners – Rubber ball – DN 65 ÷ DN 250

BASE PLATES – In cast iron or galvanised steel – Ideal for free installation

GATE VALVES – Cast iron body with bronze seats – Full free passage

CHAINS – In stainless and galvanised steel – Ø 5mm, 8mm, 12mm

ttpumps.com 24

PERMANENT installation

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

YOUR GUIDE TO GREY HANDLE Rugged stainless steel lifting and carrying handle.

CABLE GLAND The universal GAS thread of the cable gland is able to take a sheathing pipe to protect the power cable from mechanical or chemical damage due to turbulence or the aggressive nature of the liquid.

PRESSURISED TESTING Every model undergoes pressurised testing to guarantee perfect assembly and operation of the gaskets, cable gland and mechanical seals.

DRIVE SHAFT Drive shaft in AISI 431 stainless steel. Connection to impeller via tapered coupling.

MECHANICAL SEALS + V-RING Two mechanical seals in silicon carbide (SiC-SiC) enclosed in an inspectable oil chamber. This prevents all contact between the mechanical seals and any solids or filaments in the wastewater.

OIL CHAMBER Large, inspectable oil chamber to guarantee longer mechanical seal lifetime. Leakage detection sensor.

ANTI-CLOGGING SYSTEM [DR] [GR] The special conformation of the hydraulic part ensures the expulsion of solids and prevents fouling of the impeller.

DGG Vortex impeller

Same day dispatch.

DRG Channel impeller

GRG Grinding impeller

Lead time may apply.

APG High head impeller

ttpumps.com

+44 (0) 1630 647200 25

SEWAGE PUMPS - 2

Sewage Pumps

DGG RANGE

With a set back vortex impeller this submersible sewage pump is ideal for unstrained soiled biological wastewater and sewerage in civil lifting applications. Ideal for wastewater treatment plants, sewer systems, industrial and agricultural applications.

PERFORMANCE DATA

30 25 HEAD / m

SEWAGE PUMPS - 2

Sewage Pumps

FEATURES

– Cast iron EN-GJL-250 construction – Ecological dry-powdered motor – Two silicon carbide mechanical seals – Vertical and horizontal discharge

20 15

10 5 0

BENEFITS

100 110

CAPACITY / l/sec

– Designed for reliability and long life – Great solids handling capacity – Fully repairable PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT amp kW

DISCHARGE mm inch

MAXIMUM FREE CABLE m HEAD CAPACITY PASSAGE mm m l/sec

DGG 250/2/65V B0AT 400V/3Ph

PZ/1755.001

DGG 300/2/65V A0ET 400V/3Ph

PZ/1438.002

WEIGHT kg

3.7

1.8

2½

12.6

12.9

4.62

2.2

2½

14.1

44.2

DGG 250/2/65 B0AT 400V/3Ph

PZ/1756.001

3.7

1.8

2½

12.6

14.5

DGG 300/2/65 C0ET 400V/3Ph

PZ/1440.002

4.6

2.2

2½

15.7

46.2

DGG 400/2/65 D0ET 400V/3Ph

PZ/1441.002

6.4

3.0

2½

17.3

17.7

DGG 550/2/65 A0FT 400V/3Ph

PZ/1517.002

7.7

4.0

2½

18.8

20.8

71.2

DGG 750/2/65 A0FT 400V/3Ph

PZ/1510.002

10.8

5.5

2½

21.5

23.8

73.9

DGG 1000/2/65 A0FT 400V/3Ph

PZ/1511.002

13.7

7.5

2½

24.5

26.9

81.8

DGG 200/4/65 F0ET5 400V/3Ph

PZ/1452.002

3.4

1.5

2½

9.9

16.5

55.2

DGG 250/4/65 F0ET5 400V/3Ph

PZ/1446.002

4.3

1.8

2½

10.9

18.0

58.1

DGG 300/4/65 F0ET5 400V/3Ph

PZ/1447.002

5.2

2.2

2½

12.3

19.3

58.2

DGG 400/4/65 G0ET5 400V/3Ph

PZ/1460.002

6.72

3.0

2½

12.3

23.1

59.8

DGG 250/2/80 F0AT5 400V/3Ph

PZ/1757.001

3.7

1.8

7.3

17.2

DGG 300/2/80 G0ET5 400V/3Ph

PZ/1443.002

4.6

2.2

8.5

13.5

44.2

DGG 400/2/80 H0ET5 400V/3Ph

PZ/1444.002

6.3

3.0

12.3

16.8

DGG 550/2/80 N0FT5 400V/3Ph

PZ/1518.002

7.7

4.0

16.3

23.1

71.6

DGG 750/2/80 A0FT 400V/3Ph

PZ/1512.002

10.8

5.5

16.4

28.0

74.3

DGG 1000/2/80 A0FT 400V/3Ph

PZ/1513.002

13.7

7.5

20.8

36.5

82.2

DGG 150/4/80 L0AT5 400V/3Ph

PZ/1765.001

1.1

5.5

DGG 200/4/80 E0ET5 400V/3Ph

PZ/1453.002

3.4

1.5

9.5

55.2

DGG 250/4/80 E0ET5 400V/3Ph

PZ/1450.002

4.3

1.8

10.2

25.2

58.1

DGG 300/4/80 E0ET5 400V/3Ph

PZ/1451.002

5.2

2.2

11.0

23.1

58.2

DGG 400/4/80 M0ET5 400V/3Ph

PZ/1461.002

6.7

3.0

10.9

27.6

59.8

DGG 550/4/80 D0FT5 400V/3Ph

PZ/1519.002

8.4

4.0

13.8

30.0

DGG 750/4/80 D0FT5 400V/3Ph

PZ/1520.002

11.9

5.5

16.6

40.5

97.2

DGG 200/4/100 E0ET5 400V/3Ph

PZ/1470.002

3.4

1.5

100

7.7

100

58.2

DGG 250/4/100 E0ET5 400V/3Ph

PZ/1454.002

4.3

1.8

100

8.5

26.4

100

61.1

DGG 300/4/100 E0ET5 400V/3Ph

PZ/1455.002

5.2

2.2

100

9.5

24.8

100

61.2

DGG 400/4/100 D0ET5 400V/3Ph

PZ/1456.002

6.7

3.0

100

10.1

37.1

100

62.8

DGG 550/4/100 G0FT5 400V/3Ph

PZ/1514.002

8.4

4.0

100

11.5

44.2

DGG 750/4/100 G0FT5 400V/3Ph

PZ/1515.002

11.9

5.5

100

13.0

52.1

83.2

DGG 1200/4/100 B0HT 400V/3Ph

PZ/1651.001

9.0

100

19.8

61.3

100

177.2

DGG 1500/4/100 B0HT 400V/3Ph

PZ/1652.001

20.5

11.0

100

22.1

66.2

100

177.2

DGG 2000/4/100 B0HT 400V/3Ph

PZ/1653.001

30.8

15.0

100

23.3

70.9

100

189.2

DGG 1200/4/150 A0HT 400V/3Ph

PZ/1654.001

9.0

150

10.9

91.6

125

212

DGG 1500/4/150 A0HT 400V/3Ph

PZ/1655.001

20.5

11.0

150

12.7

95.8

125

212

DGG 2000/4/150 A0HT 400V/3Ph

PZ/1656.001

30.8

15.0

150

15.5

105.6

125

224

DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: DN40 - DN50 models available online, scan QR code to shop. Many models are available with ATEX rated motors, please enquire with our sales department for more information.

ttpumps.com 26

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

E-FLOW RANGE

Submersible sewage pumps with a single-channel impeller and explosion proof motor as standard (suitable for use in Zone 1 hazardous gas areas). These pumps are ideal for pumping water and other liquids, with uses in sewage, effluent and draining pumping. The E-Flow series is available with a selection of motor / impeller combinations, enabling flexibility to match specific application and performance requirements.

FEATURES

– Cast iron construction – Double mechanical seal within oil bath – Auto-coupling available – Oil seal leak sensor as standard – 100-150mm discharge

BENEFITS

– British design and manufacture – Designed for reliability and long life – Easy to maintain and repair – Great solids handling capacity – Popular product SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

E100-2.2-1 400V/3Ph

TTP/E100-2.2-1/SL

E100-2.2-2 400V/3Ph

TTP/E100-2.2-2/SL

E100-4.0-3 ASD 400V/3Ph

TTP/E100-4.0-3/SL

E100-4.0-4 ASD 400V/3Ph

TTP/E100-4.0-4/SL

E100-4.0-5 ASD 400V/3Ph

TTP/E100-4.0-5/SL

E100-5.5-5 ASD 400V/3Ph

TTP/E100-5.5-5/SL

E100-5.5-6 ASD 400V/3Ph

TTP/E100-5.5-6/SL

E150-7.5-2 ASD 400V/3Ph

TTP/E150-7.5-2/SL

E150-11-3 ASD 400V/3Ph

TTP/E150-11-3/SL

E150-15-4 ASD 400V/3Ph

TTP/E150-15-4/SL

CURVE

OUTPUT amp

DISCHARGE mm

inch

MAXIMUM HEAD m

CAPACITY l/sec

FREE PASSAGE mm

CABLE m

WEIGHT kg

DELIVERY STATUS

E150-18.5-5 ASD 400V/3Ph TTP/E150-18.5-5/SL

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 27

SEWAGE PUMPS - 2

Sewage Pumps

V-FLOW RANGE

V-Flow submersible sewage pumps have a vortex-type impeller for excellent solids passage, avoidance of blockages and the ability to handle fibrous material, also incorporating an explosion-proof motor as standard (suitable for use in Zone 1 - hazardous gas areas). HEAD / m

SEWAGE PUMPS - 2

Sewage Pumps

These pumps are ideal for pumping water and other liquids, with uses in sewage, effluent and drainage pumping. Available with a selection of motor/impeller combinations, enabling flexibility to match specific application and performance requirements.

FEATURES

– Cast iron construction – Double mechanical seal within oil bath – 100mm solids handling – 100mm discharge – Auto-coupling available – Oil seal leak sensor as standard

18 16 14 12 10 8 6 4 2 0

PERFORMANCE DATA G E

F C B

DELIVERY STATUS

CAPACITY / l/sec

BENEFITS

– British design and manufacture – Easy to maintain and repair – Excellent solids handling capacity

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

V100-1.5-1 400V/3Ph

TTP/V100-1.5-1/SL

V100-2.2-1 400V/3Ph

TTP/V100-2.2-1/SL

V100-2.2-2 400V/3Ph V100-4.0-3 400V/3Ph

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

4.0

1.5

100

5.5

100

113

5.3

2.2

100

116

TTP/V100-2.2-2/SL

5.3

2.2

100

116

TTP/V100-4.0-3/SL

4.0

100

142

V100-4.0-4 400V/3Ph

TTP/V100-4.0-4/SL

4.0

100

14.5

100

142

V100-5.5-4 400V/3Ph

TTP/V100-5.5-4/SL

12.0

5.5

100

14.5

100

144

V100-5.5-5 400V/3Ph

TTP/V100-5.5-5/SL

12.0

5.5

100

14.5

100

144

V100-7.5-5 400V/3Ph

TTP/V100-7.5-5/SL

16.5

7.5

100

165

ttpumps.com 28

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

UNIQA RANGE

The UNIQA range of electric submersible pumps is designed for heavy-duty professional applications where effective solids handling is required. The UNIQAs include a motor-hydraulics combination to provide high performance and reliability with low energy consumption.

FEATURES

– Cast iron construction (stainless steel on request) – Class H electric motor from 1.8 kW to 355 kW in efficiency class IE3 – 50 Hz and 60 Hz versions – Thermal protection devices incorporated in stator – Long life bearings (100,000 hours) – AISI 431 drive shaft (AISI 329 on request) – Leakage detection system in seal chamber (standard) and motor (on request) – Two silicon carbide mechanical seals in large oil chamber and V-rings – Discharge from DN50 to DN600 – Large free passage declared for every model – Patented closed jacket cooling system with internal recirculation – Operating temperature up to 60°C (up to 80°C on request) – ATEX II 2G Ex db k iiB T4 / II SD Ex tb IIIC T135°C certification

BENEFITS

– Energy efficient – Long term spares availability – Designed for reliability and long life

SCAN TO SHOP ONLINE

STANDARD EQUIPMENT AND OPTIONS Power supply voltage Power voltage tolerance

Compartment water leakage sensor (single signal)

STANDARD 400V Max ± 10% (S3 duty) Max ± 5% (S1 duty) IE3 - Premium Efficiency 3 - 50Hz H

Efficiency class Power supply Motor insulation class Starting Maximum ambient temperature 40°C Type of cable S1RN8 or equivalent Cable length 10m Painting Bi component epoxy - 200µm Mechanical seals 2 SiC/SiC mechanical seals in oil chamber Thermal sensors Biometal thermal sensors (150°C) Type of installation Submersible Compartment water leakage sensor (single signal) YES Oil chamber NO Motor compartment NO Motor compartment cover NO Sacrificial anodes NO Vibration sensors (bearings) NO Temperature sensors (bearings) NO ATEX certification

Same day dispatch.

Lead time may apply.

ttpumps.com

OPTIONAL 230, 500, 230/400, 440, 500/866V IE2 - High Efficiency VFD - 60Hz -

Direct, Soft start 60°C or above

EMC (VFD) 20 - 30 - 40 - 50m Bi component epoxy - 400µm PTC/PT 100 thermistors Dry YES YES YES YES YES PTC/PTC100 YES (III 2G Ex db k IIB T4 / II 2D Ex tb IIIC T135°C)

+44 (0) 1630 647200 29

SEWAGE PUMPS - 2

Sewage Pumps

SEWAGE PUMPS - 2

Sewage Pumps YOUR GUIDE TO UNIQA

CABLE GLAND Cable gland system with cable holder. The universal thread ring-nut can be removed to fix a rigid or flexible duct to the cable gland to protect the cable from physical and mechanical stresses. On request a special resin seal is applied to prevent all possibility of water leaking into the motor even if the outer sheath is torn. ELECTRICAL CONNECTIONS The terminal board, which simplifies electrical wiring procedures, is in an airtight compartment which can be fitted with a leakage detection sensor.

PAINTING Bicomponent epoxy paint, standard thickness 200 μm (max 400 μm on request).

BEARINGS Ball bearings with lifetime lubrication designed to guarantee 100,000 working hours. Optional sensors can monitor temperature and vibration to guarantee optimal performance.

WATER SENSOR Sensor fitted as standard to detect water or moisture in the mechanical seal oil chamber. Also standard on ATEX version models.

MECHANICAL SEALS Two silicon carbide mechanical seals in oil sump and V-rings to ensure excellent reliability even in heavy-duty conditions.

SUCTION and DISCHARGE The suction and discharge flanges can be ordered with holes of any standard type (UNI, ANSI, BS, etc.) to ensure perfect compatibility with the system and the accessories installed.

ZUG V Vortex hydraulics

ttpumps.com 30

ZUG OC Channel hydraulics

ZUG CP Chopper hydraulics

+44 (0) 1630 647200

ZUG V Grinder system hydraulics

ZUG HP High head hydraulics

Same day dispatch.

Lead time may apply.

EXCLUSIVE COOLING SYSTEM

In DRY version models, the motor is cooled by a water-glycol mix circulating in a special closed circuit. The mix is recycled through the pump by an axial impeller rigidly mounted on the shaft and the specially designed steel double jacket which provides the necessary heat exchange between the motor and the external environment. Thanks to this unique system: – The cooling mix is always separate from the wastewater in which the pump is immersed and cannot be contaminated, even if water leaks into the oil chamber due to wear of the first mechanical seal. – The mechanical seals are installed in an oil chamber separated from the cooling system and can be changed without draining the circuit.

Cooling liquid inspection and filler cap

Double stainless steel jacket

Axial recycling impeller

Continuous operation of the pump (S1 duty) is ensured even in dry and partially submerged working conditions or in high temperature locations.

No unpleasant surprises If the outer mechanical seal wears, the sensor warns that water is leaking into the oil chamber. The second mechanical seal allows the pump to continue operating temporarily, allowing for maintenance to be scheduled with no need for unplanned system stoppages.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 31

SEWAGE PUMPS - 2

Sewage Pumps

Sewage Pumps GR BLUE PROFESSIONAL

The GR Blue Pro range of submersible pumps are designed for domestic and professional use - featuring a cast iron impeller and chromium steel cutter, boasting high-heads and an impressive 69,000 cuts per minute. The GR Blue Pro models are equipped with an intake cutting system composed of a steel plate and a triple-bladed rotar cutter. This system cuts solid content to ensure smooth pump function.

FEATURES

PERFORMANCE DATA

30 25 HEAD / m

SEWAGE PUMPS - 2

Grinder and Cutter Pumps

– Cast iron construction & impeller – Double mechanical seal within oil bath – 7mm solids handling – 40mm horizontal discharge – Cutting action gives 69,000 cuts per minute – Automatic as standard; can be converted to manual upon request – Threaded, flanged discharge – Auto-coupling available

20 15 10 A

5 0

C B

CAPACITY / l/sec

BENEFITS

– Designed for reliability and long life – Easy to maintain and repair SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

GR BLUE PRO 100/2/G40H 230V/1Ph

PZ/1116.002

GR BLUE PRO 100/2/G40H 400V/3Ph

OUTPUT

DISCHARGE

MAXIMUM

CABLE* m

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

5.5

0.74

1½

4.7

PZ/1117.002

2.7

0.74

1½

4.7

GR BLUE PRO 150/2/G40H 230V/1Ph

PZ/1118.001

7.5

1.1

1½

GR BLUE PRO 150/2/G40H 400V/3Ph

PZ/1119.002

3.2

1.1

1½

GR BLUE PRO 200/2/G40H 230V/1Ph

PZ/1120.001

1.5

1½

5.6

GR BLUE PRO 200/2/G40H 400V/3Ph

PZ/1121.001

4.3

1.5

1½

5.6

DELIVERY STATUS

Please note: *Extended cable is not available on these pump models. Ten metre cable will be supplied as standard.

ttpumps.com 32

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Sewage Pumps GRI GRINDER RANGE

The GRI range features a multi-channel open impeller and separate rotating cutter blades operating at the pump intake. Well-suited for use with liquids containing solids that require cutting prior to being pumped, minimising the risk of blockages.

PERFORMANCE DATA

35 30 25 HEAD / m

FEATURES

– Cast iron construction – Auto-coupling available – Cutting action gives 69,000 cuts per minute – Threaded, flanged discharge

20 15 10

BENEFITS

– Designed for reliability and long life – Easy to maintain and repair

CAPACITY / l/sec

PUMP TYPE

PRODUCT CODE

CURVE

GRI 200/2/G50H A0CM5 230V/1Ph

PZ/0278.004

GRI 200/2/G50H A0CT5 400V/3Ph

PZ/0279.004

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

10.6

1.7

22.5

6.8

3.8

1.7

22.5

6.8

DELIVERY STATUS

SCAN TO SHOP ONLINE

GRG GRINDER RANGE

The GRG range of submersible pumps feature cast-iron multichannel open impeller, equipped with an external cutting mechanism capable of 69,000 cuts per minute. Ideal for the treatment of liquids containing suspended solids or fibres.

FEATURES

– Cast iron EN-GJL-250 construction – Two silicon carbide mechanical seals in oil chamber – Leakage detection sensor

BENEFITS

– Designed for reliability and long life – Easy to maintain and repair

PUMP TYPE

PRODUCT CODE

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

FREE PASSAGE mm

CABLE m

WEIGHT kg

GRG 250/2/G40H A0AT5 400V/3Ph

PZ/1750.001

3.7

1.8

1½

28.2

5.4

GRG 300/2/G50H C0ET5 400V/3Ph

PZ/1465.002

4.62

2.2

30.3

5.3

43.2

GRG 400/2/G50H D0ET5 400V/3Ph

PZ/1467.002

6.4

3.0

35.8

4.8

GRG 550/2/G50H D0FT5 400V/3Ph

PZ/1522.002

7.73

4.0

42.5

4.5

57.6

GRG 750/2/G50H AOFT 400V/3Ph

PZ/1506.002

10.8

5.5

46.6

8.4

60.3

GRG 1000/2/G50H AOFT 400V/3Ph

PZ/1507.002

13.7

7.5

53.7

8.4

68.2

DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: Many models are available with ATEX rated motors, please enquire with our sales department for more information.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 33

SEWAGE PUMPS - 2

Grinder and Cutter Pumps

Sewage Pumps TT305/TT505/TT510

The TT305, TT505, TT510 submersible pumps are designed for transferring sewage and effluent and for dirty water drainage.

PERFORMANCE DATA

FEATURES

12 10 HEAD / m

This range of pumps has shredding action produced by the impeller rotating against a special serrated suction cover, reducing any destructible matter to a manageable size for pumping, minimising the risk of blockages and providing better efficiency and economy. – Cast iron construction – Double mechanical seal within oil bath – Thermal cut out switch built into motor

8 6 4 2 0

– 15mm solids handling – 80mm discharge – Auto-coupling available

CAPACITY / l/sec

BENEFITS

– British design – Designed for reliability and long life – Easy to maintain and repair – Popular product PUMP TYPE

PRODUCT CODE

CURVE

TT305 230V/1Ph

TTP/TT305/1

TT305 400V/3Ph

TTP/TT305/3

TT505 230V/1Ph TT505 400V/3Ph TT510 400V/3Ph

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

10.5

12.5

10.5

12.5

amp

inch

HEAD m

CAPACITY l/sec

7.5

0.85

2.0

0.85

TTP/TT505/1

9.6

1.25

TTP/TT505/3

2.6

1.25

TTP/TT510/3

3.5

1.8

DELIVERY STATUS

SCAN TO SHOP ONLINE

TT1008/TT1409

The TT1008 and TT1409 submersible pumps are designed for transferring sewage and effluent and for dirty water drainage. A shredding action is produced by the impeller rotating against a special serrated suction cover; reducing any destructible matter to a manageable size for pumping.

HEAD / m

SEWAGE PUMPS - 2

Grinder and Cutter Pumps

FEATURES

– Cast iron construction – Double mechanical seal within oil bath

BENEFITS

– British design – Designed for reliability and long life – Easy to maintain and repair

PUMP TYPE

PRODUCT CODE

CURVE

18 16 14 12 10 8 6 4 2 0

PERFORMANCE DATA

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

FREE PASSAGE mm

CABLE m

WEIGHT kg

TTP/TT1008/3

8.5

4.0

100

12.5

35.8

140

TT1409 400V/3Ph

TTP/TT1409/3

11.1

5.5

100

16.1

140

CAPACITY / l/sec

TT1008 400V/3Ph

ttpumps.com

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

Sewage Pumps PTS40 CHOPPER PUMP

A submersible chopper pump with multichannel impeller and double chopper system.

FEATURES

– Automatic or manual versions available – Horizontal or vertical configuration – Available in single or three phase

BENEFITS

– Designed for reliability and long life – Easy to maintain and repair – Robust

PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

FREE PASSAGE mm

CABLE m

WEIGHT kg

PTS 0.75-40 400V/3Ph

PCR/PTS0.75/40

5.0

0.75

1½

13.5

6.25

PTS 1.1-40 230V/1Ph

PCR/PTS1.1-40

7.3

1.1

1½

17.5

7.2

DELIVERY STATUS

SCAN TO SHOP ONLINE

PTS65-150 CHOPPER RANGE

A submersible chopper pump with multichannel impeller and double chopper system.

FEATURES

HEAD / m

– Cast iron construction – Heavy duty double chopping system – Double mechanical seal within oil bath – Auto coupling available – Available with seal leak probe – Nitec corrosion resistant coating available

BENEFITS

– Designed for reliability and long life – Easy to maintain and repair – Robust PUMP TYPE

PRODUCT CODE

48 44 40 36 32 28 24 20 16 12 8 4 0

PERFORMANCE DATA

A F D 0

J K L

E I

M 60

NO 100

CAPACITY / l/sec

CURVE

OUTPUT

DISCHARGE

amp

inch

MAXIMUM HEAD m

CAPACITY l/sec

CABLE m

WEIGHT kg

DELIVERY STATUS

PTS 2.2-80N 400V/3Ph* PTS 3-80N 400V/3Ph* PTS 4-80N 400V/3Ph* PTS 4-100 400V/3Ph PTS 5.5-100 400V/3Ph PTS 7.5-100 400V/3Ph PTS 9-100 400V/3Ph PTS 11-150 400V/3Ph PTS 15-150 400V/3Ph PTS 18.5-150 400V/3Ph PTS 15-80N 400V/3Ph*

SCAN TO SHOP ONLINE

PTS 18.5-80N 400V/3Ph*

Please note: *Available with 100mm heavy duty cutting system. Many models are available with ATEX rated motors, please enquire with our sales department for more information.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 35

SEWAGE PUMPS - 2

Chopper Pumps

Sewage Pumps PTS100K-200 CHOPPER RANGE The heavy-duty cutting system consists of a serrated suction cover, cutting blades and twin cutting blocks, going into an open multi-channel impeller which means that you have a truly hasslefree design.

C PERFORMANCE DATA

60 50

This range has been used in farming, abattoirs, biogas plants, and food processing. We can also provide specialist coatings for corrosive applications and for high and low pH levels.

HEAD / m

SEWAGE PUMPS - 2

Grinder and Cutter Pumps

FEATURES

– Cast iron construction – Heavy duty double cutting system – Double mechanical seal in oil bath – Free-standing only – Available with seal leak – Nitec corrosion resistant coating available

B A

E D

10 0

100 120 140 160 180 200 220 CAPACITY / l/sec

BENEFITS

– Designed for reliability – Easy to maintain and fully repair – Robust SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

FREE PASSAGE mm

CABLE m

WEIGHT kg

PTS 15-100K 400V/3Ph

PCR/15-100K/3

15.0

100

445

PTS 25-100K 400V/3Ph

PCR/25-100K/S

25.0

100

463

PTS 30-100K 400V/3Ph

PCR/30-100K/3

30.0

100

475

PTS 37-100K 400V/3Ph

PCR/37-100K/3

3.7

100

565

PTS 45-100K 400V/3Ph

PCR/45-100K/3-1

45.0

100

9.5

150

579

PTS 15-200 400V/3Ph

PCR/15-200/3

15.0

200

150

475

PTS 18.5-200 400V/3Ph

PCR/18.5-200/3

18.5

200

161

490

PTS 22-200 400V/3Ph

PCR/22-200/3

22.0

200

165

565

PTS 25-200 400V/3Ph

PCR/25-200/3

25.0

200

180

577

PTS 30-200 400V/3Ph

PCR/30-200/3

30.0

200

195

601

ttpumps.com 36

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

ST-R RANGE

Self-priming trash pumps ideal for pumping liquids with large solids in suspension. They are used for purification plants and sewage systems where their maintenance friendly design provides a completely safe, waste management solution.

FEATURES

– Rapid self-priming without foot valve. Once filled with water, the pump is automatically primed to a height of 7.5m – Total safety for operators. Being placed outside and above liquid to be pumped, inspection and maintenance of the pump are made easier, with greatly reduced health and safety hazards for personnel – Two vane semi-open impeller handling up to 3" (76mm) solids – Easy maintenance: back pull-out rotating assembly which can be removed without dismantling the pipes or pump casing – Material of construction: Ductile iron or ductile iron with internal components in stainless steel

STR - BARE SHAFT

BENEFITS

– Designed for reliability and long life – Easy to maintain – Fully repairable SCAN TO SHOP ONLINE

PUMP TYPE

STR - BASE COMPLETE WITH MOTOR PRODUCT CODE

MAXIMUM HEAD m

FLOW m3/h

FREE PASSAGE mm

MOTOR SIZE kW

INLET x OUTLET

WEIGHT kg

ST-R25 G10E

7.5

2" BSP

102

ST-R35 G10E

110

18.5

3" BSP

192

ST-R45 G10E

180

4" BSP

270

ST-R65 G10E

365

8" ANSI

370

ST-85 G10E

600

DN200 PN16

625

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 37

SEWAGE PUMPS - 2

Sewage Pumps

Notes

ttpumps.com 38

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Contractors Pumps

SECTION 03 CONTRACTORS PUMPS

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 39

Contractors Pumps SUBMERSIBLE DRAINAGE PUMP The Liberator Range of 2" submersible drainage pumps are compact, light and powerful - suitable for ground water and water containing sand and silt. Ideal for small water features, cellars, basements and many further applications.

PERFORMANCE DATA

20 16

FEATURES

HEAD / m

CONTRACTORS PUMPS - 3

Small Contractors Pumps

– 400V, 230V and 110V contractors pump – Stainless steel outer casing and aluminium inner casing – Urethane impeller – Auto reset thermal protector – Double mechanical seal – 7mm solids handling – 0.4 – 1.5kW output – 50mm discharge – Interchangeable major components between Trencher, Liberator and PuddlePal

12 8 4 0

0.9

1.7

2.5

3.3

4.2

5.9

6.7

7.5

8.3

CAPACITY / l/sec

BENEFITS

– British design – Designed for reliability and long life – Double mechanical seal – Lightweight and easy to handle – Great investment for hire fleets F FLOAT PUMP TYPE

PRODUCT CODE

CURVE

LIBERATOR400 110V/1Ph LIBERATOR400 230V/1Ph

TTP/LIB400/110V TTP/LIB400/230V

LIBERATOR400 400V/3Ph LIBERATOR400 110V/1Ph LIBERATOR400 230V/1Ph LIBERATOR400 110V/1Ph LIBERATOR400 230V/1Ph

OUTPUT

DISCHARGE

MAXIMUM

Z FLOAT

FREE CABLE PASSAGE m mm

WEIGHT DELIVERY kg STATUS

amp

inch

HEAD m

CAPACITY l/sec

A\ A\

6.0 3.0

0.4 0.4

50 50

2 2

11 11

3.8 3.8

7 7

10 10

13.5 13.5

TTP/LIB400/400V TTP/LIB400/110VF TTP/LIB400/230VF TTP/LIB400/110VZ TTP/LIB400/230VZ

A\ A\ A\ A\ A\

0.9 6.0 3.0 6.0 3.0

0.4 0.4 0.4 0.4 0.4

50 50 50 50 50

2 2 2 2 2

11 11 11 11 11

3.8 3.8 3.8 3.8 3.8

7 7 7 7 7

10 10 10 10 10

13 13 13 13 13

TTP/LIB750/110V TTP/LIB750/230V TTP/LIB750/400V LIBERATOR750 110V/1Ph TTP/LIB750/110VF LIBERATOR750 230V/1Ph TTP/LIB750/230VF LIBERATOR750 110V/1Ph TTP/LIB750/110VZ LIBERATOR750 230V/1Ph TTP/LIB750/230VZ LIBERATOR1500 110V/1Ph TTP/LIB1500/110V LIBERATOR1500 230V/1Ph TTP/LIB1500/230V LIBERATOR1500 400V/3Ph TTP/LIB1500/400V

B\ B\ B\

11.0 5.4 1.9

0.75 0.75 0.75

50 50 50

2 2 2

15.8 15.8 15.8

5 5 5

7 7 7

10 10 10

16.2 16 16.3

B\ B\ B\ B\ C\ C\

11.0 5.4 11.0 5.4 26 12.0

0.75 0.75 0.75 0.75 1.5 1.5

50 50 50 50 50 50

2 2 2 2 2 2

15.8 15.8 15.8 15.8 20 20

5 5 5 5 7.8 7.8

7 7 7 7 7 7

10 10 10 10 10 10

16 16 16 16 24.2 23.7

3.5

1.5

7.8

23.8

LIBERATOR750 110V/1Ph LIBERATOR750 230V/1Ph LIBERATOR750 400V/3Ph

CONVERSION KIT With our conversion kits, you can convert a Liberator to a Trencher or a Trencher to a Liberator, therefore providing one pump for two applications.

ttpumps.com 40

+44 (0) 1630 647200

SCAN TO SHOP ONLINE

C STOCK CODE

PRODUCT

PHS/PAL400-LB400

CONVERSION KIT PAL400 – LB400

PHS/LB400-PAL400

CONVERSION KIT LB400 – PAL400

Same day dispatch.

SCAN TO SHOP ONLINE

Lead time may apply.

Contractors Pumps STAINLESS STEEL The Liberator Stainless Steel (316) is the ideal submersible pump for chemically abrasive and salt water applications The Liberator Stainless Steel (316) shares the same compact, light and powerful features of the standard Liberator range. They are also suitable for groundwater and water containing sand and silt – maximum solids handling of 7mm.

A PERFORMANCE DATA

HEAD / m

FEATURES

– Complete stainless steel unit – Compact, lightweight design – Double mechanical seal – Auto reset thermal protector – 7mm solids handling – 0.4 – 0.75kW output – 50mm discharge

12 8 4

0.8

1.7

2.5

3.3

CONTRACTORS PUMPS - 3

Small Contractors Pumps

4.2

5.8

6.7

7.5

8.3

CAPACITY / l/sec

BENEFITS

– British design – Designed for reliability and long life – Double mechanical seal – Great corrosion resistance PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

FREE PASSAGE CAPACITY mm l/sec

CABLE m

WEIGHT DELIVERY kg STATUS

SS/316 LIB400 230V/1Ph TTP/LIB400/SS/316

3.0

0.4

3.8

SS/316 LIB750 230V/1Ph TTP/LIB750/SS/316

5.4

0.75

15.8

SCAN TO SHOP ONLINE

A The Liberator Vortex is an extension to our popular Liberator range and provides high resistance to liquids containing sand and gravel. It has a light and compact design making it ideal for emergency dewatering.

FEATURES

PERFORMANCE DATA

HEAD / m

– High resistance to liquids containing sand and gravel – Steel coated with thermoplastic polyester elastomer – Free passage up to 38mm in diameter – Pump body is highly resistant to impact – Single phase 110V, 50Hz; 230V, 50Hz Three phase 400V, 50Hz – 50mm discharge

6 4 2 0

0.8

1.7

2.5

0.3

4.2

5.8

6.7

CAPACITY / l/sec

BENEFITS

– British design – Durable construction – Quick and easy replacement of wear components – Double mechanical seal – Lightweight and easy to handle PUMP TYPE

PRODUCT CODE

CURVE

Liberator Vortex 110V/1Ph

TTP/LIBV750/110V

Liberator Vortex 230V/1Ph

TTP/LIBV750/230V

Liberator Vortex 400V/3Ph

TTP/LIBV750/400V

Same day dispatch.

OUTPUT

DISCHARGE

MAXIMUM

FREE CABLE WEIGHT DELIVERY PASSAGE m kg STATUS mm

amp

inch

HEAD m

CAPACITY l/sec

11.5

0.75

11.7

6.3

5.6

0.75

11.7

6.3

2.0

0.75

11.7

6.3

Lead time may apply.

ttpumps.com

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 41

Contractors Pumps SUBMERSIBLE DEWATERING PUMP The Trencher Range of submersible 2" drainage pumps are compact, light and powerful - suitable for groundwater and water containing sand and silt. Used for small water features, cellars, basements and many further applications. 0.4-1.5 kW, 21m maximum head and 11.1 l/sec maximum capacity.

PERFORMANCE DATA

25 20

FEATURES

HEAD / m

CONTRACTORS PUMPS - 3

Small Contractors Pumps

– Cast iron volute and aluminium motor casing – High abrasive resistant resin – Vortex impeller – Double mechanical seal – Power Supply: Single phase 110V, 50Hz; Single phase 230V, 50Hz; Three phase 400V, 50Hz – Built in agitator – Auto thermal protector - non-air locking – 0.4 – 1.5 kW output – 50mm discharge – Interchangeable major components between Trencher, Liberator, and PuddlePal

15 10 5 0

0.8

1.7

2.5

3.3

4.2

5.8

CAPACITY / l/sec

BENEFITS

– British design – Designed for reliability and long life – Double mechanical seal – Lightweight and easy to handle F FLOAT PUMP TYPE

T400 110V/1Ph T400F 110V/1Ph T400Z 110V/1Ph T400 230V/1Ph T400F 230V/1Ph T400Z 230V/1Ph T400 400V/3Ph T750 110V/1Ph T750F 110V/1Ph T750Z 110V/1Ph T750 230V/1Ph T750F 230V/1Ph T750Z 230V/1Ph T750 400V/3Ph T1500 110V/1Ph T1500 230V/1Ph T1500 400V/3Ph 3” Discharge for T750/T1500*

PRODUCT CODE TTP/T400/110V TTP/T400/110VF TTP/T400/110VZ TTP/T400/230V TTP/T400/230VF TTP/T400/230VZ TTP/T400/400V TTP/T750/110V TTP/T750/110VF TTP/T750/110VZ TTP/T750/230V TTP/T750/230VF TTP/T750/230VZ TTP/T750/400V TTP/T1500/110V TTP/T1500/230V TTP/T1500/400V

CURVE OPERATION

A\ A\ A\ A\ A\ A\ A\ B\ B\ B\ B\ B\ B\ B\ C\ C\ C\

MANUAL F FLOAT Z FLOAT MANUAL F FLOAT Z FLOAT MANUAL MANUAL F FLOAT Z FLOAT MANUAL F FLOAT Z FLOAT MANUAL MANUAL MANUAL MANUAL

OUTPUT

DISCHARGE

amp

6 6 6 3 3 3 0.9 11 11 11 5.4 5.4 5.4 1.9 26 12 4

0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.75 0.75 0.75 0.75 0.75 0.75 0.75 1.5 1.5 1.5

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

MAXIMUM

inch HEAD CAPACITY m l/sec 2 12 3.6 2 12 3.6 2 12 3.6 2 12 3.6 2 12 3.6 2 12 3.6 2 12 3.6 2 18 5.8 2 18 5.8 2 18 5.8 2 18 5.8 2 18 5.8 2 18 5.8 2 18 5.8 2 21 11.1 2 21 11.1 2 21 11.1

Z FLOAT

FREE CABLE WEIGHT DELIVERY PASSAGE STATUS m kg mm 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

13 13.3 13.3 13 13.3 13.3 13 15.5 15.8 15.8 15.5 15.8 15.8 15.5 19.6 19.6 19.6

PHS/80MMHTAIL

CONVERSION KIT With our conversion kits, you can convert a Trencher to a Puddlepal therefore providing one pump for two applications.

ttpumps.com 42

+44 (0) 1630 647200

SCAN TO SHOP ONLINE

C STOCK CODE

PRODUCT

PHS/T400POS.16

CONVERSION KIT T400 – T400PAL

Same day dispatch.

SCAN TO SHOP ONLINE

Lead time may apply.

Contractors Pumps TRENCHER SLURRY MATE The Trencher Slurry Mate is suitable for pumping heavily laden muddy water. The impeller and agitator is made of high chrome alloy to ensure durability. The semi vortex impeller reduces clogging caused by sand, making this pump ideal for construction and building sites.

A PERFORMANCE DATA

HEAD / m

FEATURES

– Water temperature: Up to 40°C – PH: 6.5 to 8.5 – Power supply: single-phase 230V, 50Hz; three-phase 400V, 50Hz – Insulation class: F – Protection class: IP 68 – Maximum immersion depth: 10m

8 6 4 2 0

0.8

1.7

2.5

BENEFITS

3.3

4.2

5.8

6.7

CAPACITY / l/sec

– British design – Designed for reliability and long life – Lightweight and easy to handle – Double mechanical seal – Easy to handle SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

FREE PASSAGE mm

CABLE m

WEIGHT kg

TRENCHER SLURRY MATE 230V/1Ph TTP/T500SM/1

4.0

0.55

6.3

15.5

TRENCHER SLURRY MATE 400V/3Ph TTP/T500SM/3

1.7

0.55

6.3

15.5

DELIVERY STATUS

Please note: See our KTA range for larger units. (Page 51)

COMING SOON!

COMING SOON... INLINE NON RETURN VALVE Suitable for T-T's range of 2" and 3" Liberator, Trencher, Puddlepal and KT Contractors Range. Please contact our sales department for more information.

Please note: The above image is for illustrative purposes only.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 43

CONTRACTORS PUMPS - 3

Small Contractors Pumps

Contractors Pumps 2" PUDDLE PUMP The Puddlepal can be identified as a puddle sucker or residue pump, greatly favoured by Hire Companies and the Emergency Services for its ability to pump liquids down to 1mm whilst pumping good volumes in flood conditions. This makes the Pudddlepal the ideal companion when dealing with flood water, allowing the remaining water at lower levels to be swept to the pump for final removal.

A PERFORMANCE DATA

16 14 12 HEAD / m

CONTRACTORS PUMPS - 3

Small Contractors Pumps

FEATURES

– Cast iron casing, stainless steel outer casing and aluminium inner casing – High abrasive resistant resin – Vortex impeller – Single phase 110V, 230V, 50Hz; Three phase 400V, 50Hz – Interchangeable major components between Trencher, Liberator and Puddlepal – Double mechanical seal – Auto thermal protector - Non-air locking – 0.4 – 0.75 kW output – 50mm discharge

10 8 6 4

2 0

0.8

1.7

2.5

3.3

4.2

5.8

CAPACITY / l/sec

BENEFITS

– British design – Designed for reliability and long life – Double mechanical seal – Lightweight and easy to handle

PUMP TYPE

PRODUCT CODE

CURVE

PAL400 110V/1Ph

TTP/PAL400/110V

PAL400 230V/1Ph

TTP/PAL400/230V

OUTPUT

DISCHARGE

MAXIMUM

FREE CABLE PASSAGE m mm

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

6.0

0.4

3.75

14.5

3.0

0.4

3.75

14.5

PAL400 400V/3Ph

TTP/PAL400/400V

0.9

0.4

3.75

PAL750 110V/1Ph

TTP/PAL750/110V

11.0

0.75

15.8

16.9

PAL750 230V/1Ph

TTP/PAL750/230V

5.4

0.75

15.8

16.7

PAL750 400V/3Ph

TTP/PAL750/400V

1.9

0.75

15.8

DELIVERY STATUS

PUDDLEPAL CONVERSION KIT With our conversion kits, you can convert a Puddlepal to a Liberator or a Liberator to a Puddlepal, therefore providing one pump for two applications.

ttpumps.com 44

+44 (0) 1630 647200

SCAN TO SHOP ONLINE

A STOCK CODE

PRODUCT

PHS/PAL400-LB400

CONVERSION KIT PAL400 – LB400

PHS/LB400-PAL400

CONVERSION KIT LB400 – PAL400

Same day dispatch.

SCAN TO SHOP ONLINE

Lead time may apply.

Contractors Pumps PALPACK

The PalPack is a combination of a submersible dewatering pump, control unit and level detector for peace of mind dewatering. The PalPack is available in two options, option one consists of the Puddlepal, WaterGuard and WaterVole, this is suitable for applications where a standard level control is required. Option two consists of the Puddlepal, WaterGuard Pro and one WaterVole Pro level detectors, this is suitable for applications where a high level alarm warning system is required.

CONTRACTORS PUMPS - 3

Small Contractors Pumps

BENEFITS

– British design – Designed for reliability and long life – Double mechanical seal – Lightweight – Easy to install

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

TTP/PAL400/110WV

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

3.75

14.4

3.75

16.2

3.75

14.4

amp

inch

HEAD m

CAPACITY l/sec

0.4

PALPACK PRO 400 110V TTP/PAL400/110WV2

0.4

TTP/PAL400/230WV

0.4

PALPACK 400 110V PALPACK 400 230V

PALPACK PRO 400 230V TTP/PAL400/230WV2

0.4

3.75

16.2

TTP/PAL750/110WV

0.75

15.8

14.4

PALPACK PRO 750 110V TTP/PAL750/110WV2

0.75

15.8

16.2

TTP/PAL750/230WV

5.4

0.75

15.8

14.4

PALPACK PRO 750 230V TTP/PAL750/230WV2

5.4

0.75

15.9

16.2

PALPACK 750 110V PALPACK 750 230V

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 45

Contractors Pumps A The FloodBuddy is a submersible emergency dewatering set that contains a stainless steel pump with built-in level switch, integrated check valve and mounting bracket among other beneficial components. Ideal for emergency dewatering with a plug and play feature, the FloodBuddy can be used anywhere that flooding may occur.

HEAD / m

FEATURES

– Stainless steel Liberator 400 pump with built in level switch – Integrated check valve and mounting bracket – 10m cable – 10m hose with quick release coupling set – Made of stainless steel – Transport box with 8x8mm holes as protection against coarse solids – Pump may be used outside of the box

12 8 4

0.8

1.7

2.5

3.3

4.2

5.8

6.7

7.5

8.3

CAPACITY / l/sec

PRODUCT CODE

CURVE

FLOOD BUDDY 110V

TTP/FLOODBUD/1

FLOOD BUDDY 230V

TTP/FLOODBUD/2

PUMP TYPE

PERFORMANCE DATA

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

WEIGHT kg

3.8

amp

inch

HEAD m

CAPACITY l/sec

0.4

3.7

0.4

7.4

DELIVERY STATUS

SCAN TO SHOP ONLINE

B The PuddleMate is a mobile diaphragm pump with 1" suction and discharge hoses of 3.5 metres. Its universal application through five interchangeable nozzles make this portable plug and play product user friendly, robust and durable.

14 12

FEATURES

– Mobile diaphragm pump with 1" suction and discharge hoses of 3.5 metres – Universal application through five interchangeable suction nozzles – Available in 230v and 110v with 10-metre power cable – Available in two options: PuddleMate for water and PuddleMate for oil-contaminated water (oil resistant diaphragm and hoses) – Robust and durable – Resistant to abrasive waste such as small stones, sludge and leaves – Portable plug and play product – Stainless steel pump casing and EPDM rubber membrane – Integrated non-return valve to prevent backflow PUMP TYPE

PRODUCT CODE

CURVE

WATER 110V

TTP/PM/W/110V

WATER 230V

TTP/PM/W/230V

OIL RESISTANT DIAPHRAGM & HOSE 110V OIL RESISTANT DIAPHRAGM & HOSE 230V

10 8 6 4

2 0

0.13

0.27

0.41

0.55

0.69

0.83

0.97

1.1

CAPACITY / l/sec

DISCHARGE

MAXIMUM

SOLIDS HANDLING mm

FLOW RATE m3/h

WEIGHT kg

0.83

3.0

0.83

3.0

0.83

3.0

0.83

3.0

amp

inch

HEAD m

CAPACITY l/sec

3.8

0.15

1.2

0.15

TTP/PM/O/110V

3.8

0.15

TTP/PM/O/230V

1.2

0.15

ttpumps.com 46

OUTPUT

PERFORMANCE DATA

HEAD / m

CONTRACTORS PUMPS - 3

Small Contractors Pumps

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

Contractors Pumps TT505C

TT505C is a fully submersible de-watering pump for clean or silty water. Ideal for the toughest of conditions including applications such as large water features, nuisance water, civil construction and quarries and mining. 1.25kW output, 15m maximum head and 16l/sec maximum capacity.

PERFORMANCE DATA

16 14 12 HEAD / m

FEATURES

– Cast aluminium construction – Submersible – Double mechanical seal within oil bath – Thermal cut out switch built into motor – 10mm solids handling – 1.25kW output – 80mm discharge

10 8 6 4 2 0

BENEFITS

CAPACITY / l/sec

– British design – Designed for reliability and long life – Double mechanical seal – Robust SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

TT505C 110V/1Ph

TTP/TT505C/2

TT505C 230V/1Ph

TTP/TT505C/1

TT505C 400V/3Ph

TTP/TT505C/3

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

1.25

9.6

1.25

2.6

1.25

DELIVERY STATUS

Please note: See our KT range for larger units. (Pages 48 - 55)

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 47

CONTRACTORS PUMPS - 3

Large Contractors Pumps

Contractors Pumps KTS RANGE

Compact design, high-performance and exceptional durability for handling abrasive liquid, widely used in general construction and civil engineering. The KTS range is designed for continuous operation.

PERFORMANCE DATA 60 50

FEATURES

– Cast iron construction and stainless steel casing – Power supply: Three-phase 400V-50Hz, Single-phase 230V-50Hz – Insulation class: F – Protection class: IP68 – Motor temperature: 40°C – Maximum water depth: 25m – Probe (E) or Float Switch (F) option available on request

HEAD / m

40 30

C 20

J L

E A

BENEFITS

2.7

5.5

M B

8.3 11.1 13.8 16.6 19.4 22.2

– British design – Designed for reliability and long life – Double mechanical seal – Lightweight – Tough and robust

25 27.7 30.5 33.3 36.1 38.8 41.6

CAPACITY / l/sec

SCAN TO SHOP ONLINE

SINGLE PHASE

PUMP TYPE

THREE PHASE

CONTRACTORS PUMPS - 3

Large Contractors Pumps

PRODUCT CODE

CURVE

KTSM 50

TTP/KTS50-1.5M

DISCHARGE

MAXIMUM

FREE PASSAGE CAPACITY mm l/sec

amp

inch

HEAD m

1.5

8.3

CABLE m

WEIGHT kg

8.5

KTSM 80

TTP/KTS80-1.5M

1.5

11.6

8.5

KTS 50 1.5

TTP/KTS50-1.5

3.5

1.5

8.3

8.5

KTS 80

TTP/KTS80-1.5

3.5

1.5

11.6

8.5

KTS 50 2.2

TTP/KTS50-2.2

5.0

2.2

8.8

8.5

KTS 80

TTP/KTS80-2.2

5.0

2.2

18.5

15.2

8.5

KTS 50 3.7

TTP/KTS50-3.7

7.7

3.7

8.5

KTS 80 3.7

TTP/KTS80-3.7

7.7

3.7

16.6

8.5

KTS 100 3.7

TTP/KTS100-3.7

7.7

3.7

100

26.3

8.5

KTS 80 5.5

TTP/KTS80-5.5

11.4

5.5

8.5

KTS 100

TTP/KTS100-5.5

11.4

5.5

100

29.1

8.5

KTS 100 7.5

TTP/KTS100-7.5

7.5

100

24.4

11.5

108

KTS 150 7.5

TTP/KTS150-7.5

7.5

150

36.1

19.5

110

KTS 100 11

TTP/KTS100-11

11.0

100

48.5

11.5

123

KTS 150 11

TTP/KTS150-11

11.0

150

41.6

19.5

125

KTS 100 15

TTP/KTS100-15

29.5

100

19.5

145

KTS 150 15

TTP/KTS150-15

29.5

150

46.6

19.5

146

ttpumps.com 48

OUTPUT

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

Contractors Pumps KTSE RANGE

Submersible drainage pump with built-in level control probe. The design has improved motor cooling due to the discharge channel being part of the motor housing, allowing the range to pump at low levels for long periods.

PERFORMANCE DATA 60 50

The probe automatically starts and stops the pump operation to maximise efficiency and reduce power consumption. HEAD / m

– Protects against reverse phase, ensures correct impeller rotation – Protects against open phase or impeller jam, preventing accidental damage – Automatically stops the pump in the event of overload or abnormal voltage, resets 5 minutes later – The water sensor's height is adjustable to control pump operation start and stop

C 20

J L

E A

0 0

FEATURES

– Capacity: up to 41.6 l/sec – Head: up to 48m – Power: 1.5kW to 15kW – Insulation class: F PUMP TYPE

2.7

5.5

M B

CURVE

KTSE 50 1.5

TTP/KTSE50-1.5

KTSE 80 1.5 KTSE 50 2.2

OUTPUT

DISCHARGE

8.3 11.1 13.8 16.6 19.4 22.2

– Protection class: IP68 – Motor temperature: 40°C – Maximum water depth: 25m – Power supply: Three phase, 400V-50Hz

PRODUCT CODE

25 27.7 30.5 33.3 36.1 38.8 41.6

CAPACITY / l/sec

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

3.5

1.5

8.3

8.5

TTP/KTSE80-1.5

3.5

1.5

11.6

8.5

TTP/KTSE50-2.2

5.0

2.2

8.8

8.5

KTSE 80 2.2

TTP/KTSE80-2.2

5.0

2.2

18.5

15.2

8.5

KTSE 50 3.7

TTP/KTSE50-3.7

7.7

3.7

8.5

KTSE 80 3.7

TTP/KTSE80-3.7

7.7

3.7

16.6

8.5

KTSE 100 3.7

TTP/KTSE100-3.7

7.7

3.7

100

26.3

8.5

KTSE 80 5.5

TTP/KTSE80-5.5

11.4

5.5

8.5

KTSE 100 5.5

TTP/KTSE100-5.5

11.4

5.5

100

29.1

8.5

KTSE 100 7.5

TTP/KTSE100-7.5

7.5

100

24.4

11.5

129

KTSE 150 7.5

TTP/KTSE150-7.5

7.5

150

36.1

19.5

142

KTSE 100 11

TTP/KTSE100-11

11.0

100

48.5

11.5

129

KTSE 150 11

TTP/KTSE150-11

11.0

150

41.6

19.5

157

KTSE 100 15

TTP/KTSE100-15

29.5

100

19.5

145

KTSE 150 15

TTP/KTSE150-15

29.5

150

46.6

19.5

146

DELIVERY STATUS

SCAN TO SHOP ONLINE

KTSE OPERATION 1

The pump continually runs while the electric probe remains submerged.

When the water surface falls below the electric probe, the timer starts (for approximately 60 seconds).

The pump stops as long as the water level stays below the electric probe.

When the water level rises and comes into contact with the electric probe, the pump starts operating again. The entire process is then repeated.

Same day dispatch.

Lead time may apply.

CONTRACTORS PUMPS - 3

Large Contractors Pumps

ttpumps.com

If the water capacity of the sump/pit is small, in order to avoid rapid start/stop operations, a ball check valve should be installed at the discharge of the pump. The electric probe should also be positioned as far up the pump as possible.

+44 (0) 1630 647200 49

Contractors Pumps KTC RANGE

A submersible pump range with water-cooled motors to ensure a long life in both continuous and intermittent operation, providing high efficiency and energy savings.

PERFORMANCE DATA

50 40

Ideal for dewatering, water transfer for drainage, irrigation and emergency pumping.

HEAD / m

CONTRACTORS PUMPS - 3

Large Contractors Pumps

FEATURES

– Capacity: up to 30 l/sec – Head: up to 31m – Discharge: 80mm (3") to 100mm (4") – Power: 1.5kW (2HP) to 5.5kW (7.5HP) – Power supply: three phase 400V ±10%, 50Hz – Insulation class: F – Protection class: IP68 – Cable length: 15m – Water temperature: up to 40°C – Max. water depth: 25m

30 20 10 0

2.7

5.5

8.3 11.1 13.8 16.6 19.4 22.2 25

27.7 30.5

CAPACITY / l/sec

BENEFITS

– British design – Designed for reliability and long life – Double mechanical seal – Lightweight – Easy to handle SCAN TO SHOP ONLINE

PUMP TYPE

KTC 80 1.5

PRODUCT CODE

CURVE

TTP/KTC80-1.5

OUTPUT

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

HEAD m

CAPACITY l/sec

3.5

1.5

18.5

14.7

38.5

KTC 80 2.2

TTP/KTC80-2.2

5.0

2.2

16.9

KTC 100 2.2

TTP/KTC100-2.2

100

5.0

2.2

21.6

KTC 100 3.7

TTP/KTC100-3.7

100

7.5

3.7

25.5

26.6

KTC 100 5.5

TTP/KTC100-5.5

100

11.4

5.5

ttpumps.com 50

OUTLET mm

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

Contractors Pumps KTA RANGE

Submersible slurry pump with a 2 and 4-pole motor for an increased lifetime and easy maintenance. A high chrome impeller combined with an agitator allow for pumping heavy slurry, while its slim design and top discharge enable installation in tight spaces, for example, bentonite mixed water in foundation works or muddy / sandy water in civil engineering works.

PERFORMANCE DATA

HEAD / m

FEATURES

– Capacity: up to 108.3l/sec – Head: up to 42m – Agitator – Discharge: 50mm (2") to 200mm (8") – Power: 1.5kW to 37kW – Power supply: three phase 400V ±10%, 50Hz – Insulation class: F – Protection class: IP68 – Cable length: 15m – Water temperature: up to 40°C – Max. water depth: 25m

A 0

2.7

5.5

8.3

13.8

16.6

19.4

22.2

27.7

HEAD / m

SCAN TO SHOP ONLINE

2 POLE

11.1

PERFORMANCE DATA

– British design – Designed for reliability and long life – Double mechanical seal – Lightweight – Heavy-duty and robust design

4 POLE

CAPACITY / l/sec

BENEFITS

PUMP TYPE

11.1

22.2

33.3

44.4

55.5

66.6

77.7

88.8

100

111.1

CAPACITY / l/sec PRODUCT CODE

CURVE

KTA 50 1.5

TTP/KTA50-1.5

KTA 50 2.2 KTA 80 3.7

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

3.5

1.5

8.3

TTP/KTA50-2.2

5.0

2.2

8.3

TTP/KTA80-3.7

7.7

3.7

16.6

KTA 100 3.7

TTP/KTA100-3.7

7.7

3.7

100

KTA 80 4

TTP/KTA80-4

10.2

4.0

14.8

27.5

108.5

KTA 100 6

TTP/KTA100-6

13.8

6.0

100

16.9

141

KTA 150 9

TTP/KTA150-9

19.5

9.0

150

21.5

53.3

171

KTA 200 15

TTP/KTA200-15

30.1

200

103.3

260

KTA 200 22

TTP/KTA200-22

200

100

408

KTA 200 30

TTP/KTA200-30

57.6

200

108.3

510

KTA 200 37

TTP/KTA200-37

69.8

200

108.3

535

DELIVERY STATUS

PUMP WITH AGITATOR EXPOSED. PUMP WITH BASE AND GUARD AS SOLD

Same day dispatch.

AGITATOR

Lead time may apply.

ttpumps.com

PLEASE NOTE: DO NOT OPERATE UNLESS BASE AND GUARD FITTED

+44 (0) 1630 647200 51

CONTRACTORS PUMPS - 3

Large Contractors Pumps

Contractors Pumps KTA/S RANGE

Submersible slurry pumps with 4-pole motors for increased lifetime and greater convenience. Their high chrome alloy impeller and agitator combination allows for pumping heavy slurry, ideal for pumping sludge and liquids containing mud, sand and bentonite.

FEATURES

PERFORMANCE DATA 22 20

– Capacity: up to 68.3 l/sec – Head: up to 15 – Power: 2.2kW to 11kW – Power Supply: three-phase 400V - 50Hz – Insulation class: F– Protection class: IP68 – Water temperature: up to 40°C – Max. water depth: 20m

HEAD / m

14 12 10

8 6

D C

BENEFITS

– British design – Designed for reliability and long life – Double mechanical seal – Rugged pump

4.1

8.3

12.5

16.6

20.8

29.1

33.3

36.1

CAPACITY / l/sec PERFORMANCE DATA

SCAN TO SHOP ONLINE

20 HEAD / m

CONTRACTORS PUMPS - 3

Large Contractors Pumps

15 10 E

5 0

16.6

33.3

66.6

CAPACITY / l/sec

PUMP TYPE

PRODUCT CODE

CURVE

KTA/S 80 2.2

TTP/KTAS80-2.2

KTA/S 80 3.7

TTP/KTAS80-3.7

KTA/S 100 3.7 KTA/S 100 5.5 KTA/S 150 11

OUTPUT

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

HEAD m

CAPACITY l/sec

5.5

2.2

8.1

3.7

108

TTP/KTAS100-3.7

100

8.1

3.7

31.6

108

TTP/KTAS100-5.5

100

11.7

5.5

17.5

38.3

139

TTP/KTAS150-11

150

22.5

68.3

210

ttpumps.com 52

OUTLET mm

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

Contractors Pumps B Compact, high performing, exceptionally durable pumps for handling abrasive liquid, widely used in general construction and civil engineering. The Sand Devil is designed for continuous operation.

PERFORMANCE DATA

40 K

30 HEAD / m

FEATURES

– Cast iron construction with high chrome impeller and agitator – Capacity: up to 165.8 l/sec – Power: 2.2kW to 75kW – Power supply: Three phase 400V-50Hz – Insulation class: F – Protection class: IP68 – Motor temperature: 40°C – Maximum water depth: 15m

20 G

10 0

B A

13.8

27.7

41.6

55.5

69.4

83.3

97.2

CAPACITY / l/sec

BENEFITS

– British design – Designed for reliability and long life – Double mechanical seal – Heavy-duty and robust design

PERFORMANCE DATA

60 50

HEAD / m

SCAN TO SHOP ONLINE

30 20 O 10

N M

0 0

13.8

27.7

41.6

55.5

69.4

83.3

97.2

111.1

125

138.8

152.7

166.6

DELIVERY STATUS

CAPACITY / l/sec PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

FREE PASSAGE mm

CABLE m

WEIGHT kg

KTSD 80 2.2

TTP/KTSD80-2.2

5.0

2.2

20.8

KTSD 80 3.7

TTP/KTSD80-3.7

8.5

3.7

23.6

KTSD 100 5.5

TTP/KTSD100-5.5

11.7

5.5

100

38.8

141

KTSD 100 7.5

TTP/KTSD100-7.5

15.7

7.5

100

44.4

156

KTSD 100 11

TTP/KTSD100-11

11.0

100

52.7

236

KTSD 150 11

TTP/KTSD150-11

11.0

150

61.1

245

KTSD 100 15

TTP/KTSD100-15

30.1

15.0

100

61.1

260

KTSD 150 15

TTP/KTSD150-15

30.1

15.0

150

70.8

269

KTSD 150 18.5

TTP/KTSD150-18.5

18.5

150

91.6

342

KTSD 200 18.5

TTP/KTSD 200 18.5

18.5

200

91.6

361

KTSD 150 22

TTP/KTSD150-22

22.0

150

91.6

355

KTSD 200 22

TTP/KTSD200-22

22.0

200

97.2

374

KTSD 150 30

TTP/KTSD150-30

57.6

30.0

150

100

444

KTSD 150 37

TTP/KTSD150-37

69.8

37.0

150

100

534

KTSD 150 45

TTP/KTSD150-45

84.5

45.0

150

111.1

562

KTSD 200 55

TTP/KTSD200-55

105

55.0

200

161.1

800

KTSD 200 75

TTP/KTSD200-75

141

75.0

200

166.6

875

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 53

CONTRACTORS PUMPS - 3

Large Contractors Pumps

Contractors Pumps KTH/S RANGE

A submersible pump featuring double mechanical seals and a chrome-plated shaft to ensure high corrosion and wear resistance.

HEAD / m

The hydraulic part under the motor is cooled by the pumped water for safe operation, with the pump only partially submerged. Suitable for dewatering and water transfer applications, as well as irrigation.

FEATURES

– Capacity: up to 25 l/sec – Head: up to 142m – Power: 2.2kW (3HP) to 25kW (33.5HP) – Power supply: three phase 400V 10% 50Hz – Insulation class: F – Protection class: IP68 – Cable length: 15m – Water temperature: 40°C – Max. water depth: 20m

PERFORMANCE DATA

100 90 80 70 60 50 40 30 20 10 0 0

D A

2.7

5.5

8.3

11.1

13.8

CAPACITY / l/sec

BENEFITS

– British design – Designed for reliability and long life – Double mechanical seal – Fully repairable – High head performance

HEAD / m

CONTRACTORS PUMPS - 3

Large Contractors Pumps

SCAN TO SHOP ONLINE

PERFORMANCE DATA

160 140 120 100 80 60 40 20 10 0 0

I J G

2.7

5.5

8.3

11.1 13.8 16.6 19.4 22.2

27.7

CAPACITY / l/sec

PUMP TYPE

PRODUCT CODE

CURVE

OUTLET mm

OUTPUT

MAXIMUM

amp

HEAD m

CAPACITY l/sec

FREE PASSAGE mm

CABLE m

WEIGHT kg

KTHS 50 (2) 10-2.2

TTP/KTHS50-2.2

5.4

2.2

7.7

KTHS 50 (3) 10-3

TTP/KTHS50-3

7.2

3.0

7.7

KTHS 50 (3) 12.5-4

TTP/KTHS50-4

8.8

4.0

8.3

KTHS 50 (3) 15-5.5

TTP/KTHS50-5.5

11.7

5.5

8.8

KTHS 50 (4) 25-7.5

TTP/KTHS50-7.5

15.7

7.5

11.6

KTHS 50 (3) 20-11

TTP/KTH565-11

106

13.8

178

KTHS 50 (4) 20-15

TTP/KTHS65-15

142

13.8

210

KTHS 80 (3) 40-15

TTP/KTHS80-15

206

KTHS 80 (3) 40-18.5

TTP/KTHS80-18.5

37.2

18.5

108

225

KTHS 100 (3) 60-25

TTP/KTHS100-25

100

123

263

ttpumps.com 54

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

Contractors Pumps KTH RANGE

Submersible drainage pumps made of cast iron for long-lasting durability. The KTH range has a high maximum submersion depth, suitable for civil engineering and construction works as well as mines and quarries. HEAD / m

FEATURES

– Capacity: up to 108.3 l/sec – Head: up to 130m – Power: 22kW (30HP) to 110kW (100HP) – Power supply: three-phase 400V ±10%, 50Hz – Insulation class: F – Protection class: IP68 – Cable length: 20m – Water temperature: up to 40°C – Max.water depth: 30m

180 160 140 120 100 80 60 40 20 0 0

PERFORMANCE DATA

O I J F A

6.9

13.8 20.8 27.7 34.7 41.6 48.6 55.5 62.5 69.4 CAPACITY / l/sec

BENEFITS

HEAD / m

– British design – Designed for reliability and long life – Double mechanical seal – Robust – High head performance SCAN TO SHOP ONLINE

110 100 90 80 70 60 50 40 30 20 10 0 0

PERFORMANCE DATA

N P K G

L H

13.8 27.7 41.6 55.5 69.4 83.3 97.2 111.1 125 138.8 CAPACITY / l/sec

PUMP TYPE

PRODUCT CODE

CURVE

KTH 100 22

TTP/KTH100-22

KTH 100 30

TTP/KTH100-30

KTH 150 22 KTH 150 30

OUTLET mm

OUTPUT

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

HEAD m

CAPACITY l/sec

100

41.5

22.0

36.1

370

100

30.0

47.2

375

TTP/KTH150-22

150

41.5

22.0

55.5

385

TTP/KTH150-30

150

30.0

61.1

390

KTH 150 37

TTP/KTH150-37

150

37.0

61.1

570

KTH 150 45

TTP/KTH150-45

150

45.0

61.1

575

KTH 200 37

TTP/KTH200-37

200

37.0

91.6

575

KTH 200 45

TTP/KTH200-45

200

45.0

103.3

580

KTH 150 55

TTP/KTH150-55

150

105

55.3

830

KTH 150 75

TTP/KTH150-75

150

132

75.0

130

830

KTH 200 55

TTP/KTH200-55

200

91.6

830

KTH 200 75

TTP/KTH200-75

200

132

108.3

880

KTH 150 90

TTP/KTH150-90

150

162

90.0

155

41.6

1100

KTH 200 90

TTP/KTH200-90

200

162

90.0

100

1120

KTH 150 110

TTP/KTH150-110

150

198

110.0

177

1130

KTH 200 110

TTP/KTH200-110

200

198

110.0

107

108.3

1150

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 55

CONTRACTORS PUMPS - 3

Large Contractors Pumps

Contractors Pumps CONTRACTORS PUMPS - 3

Floatation Pontoon

The Pontoon has been engineered to be a versatile and compact floatation device for de-watering, utilising submersible or engine driven pumps. Constructed in marine grade foam filled polyethylene with UV15 protection, with 304 stainless steel straps and fittings to maximise durability. The range is available in two options, one suitable for submersible pumps and one for surface mounted pumps. Each unit comes supplied with a lifting certificate for peace of mind that the flotation device can hold the weight specified.

FEATURES

– Comes with chain (for submersibles only) – Maximum buoyancy for single unit: 160kg – Certified lifting capacity: 250kg (can be increased) – UV15 protection – Pumps easily mounted on site – Lifting points for easy installation – 304 stainless steel lifting frame (316 option available upon request) – Modular design to increase load capacity (max. of 4 units together) – Surface mounted version includes 'Clamp & Strap' kit which includes a plastic drip tray and stainless cross support straps to prevent possible pollution

PONTOON WITH SURFACE MOUNTED PUMP

PONTOON WITH SUBMERSIBLE PUMP

BENEFITS

– British design and manufacture – Designed for reliability and long life – Flexible design

1300mm

SCAN TO SHOP ONLINE

470mm 450mm

1100mm

350mm

TYPE

PRODUCT CODE

DIMENSIONS H x W x D mm

PUMP MOUNTING

WEIGHT kg

PONTOON SUBMERSIBLE

TT/PONTOON/SUB

1300 x 1100 x 450

SUBMERSIBLE PUMP

PONTOON SURFACE MOUNTED

TT/PONTOON/SURF

1300 x 1100 x 450

SURFACE MOUNTED PUMP

REPLACEMENT FIXING BRACKET KIT – SUBMERSIBLE

TT/PONTOON/CLAMP

REPLACEMENT FIXING BRACKET KIT – SURFACE MOUNTED

TT/PONTOON/STRAP

ttpumps.com 56

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

Contractors Pumps WP25

HEAD / m

A high performance water pump with a hydraulic motor designed for pumping clear and muddy water with suspended solids up to 20mm. The hydraulic functioning guarantees high power, safety and resistance to abrasive liquids and the possibility of running dry. Thanks to its robust design and long operative life, the WP25 is ideal for professional use, maintenance of utility networks, dewatering, civil protection and road maintenance works. With implicit safety thanks to the absence of electricity, and its ability to handle thick and muddy liquids, these pumps can be powered by small power packs, mini excavators and trucks, making them ideal for the construction industry.

45 40 35 30 25 20 15 10 5 0

PERFORMANCE DATA

A – 30l/min*

3.3

6.6

13.3

16.6

CONTRACTORS PUMPS - 3

Hydraulic Pumps

A – 38l/min*

23.3

26.6

CAPACITY / l/sec

Please note: *Hydraulic fluid flow rate

BENEFITS

FEATURES

– Head up to 45m – Possibility to run dry without damages – Robust construction and minimal maintenance needs – Implicit safety thanks to the absence of electricity, zero priming problems – The pumping chamber can be open in a few seconds for inspection and cleaning PUMP TYPE WP25

PRODUCT CODE

CURVE

PD/TT-WP25

– Designed for reliability and long life – Easy to maintain and repair – Double mechanical seal – Lightweight – Flexible design

DISCHARGE mm

inch

FLOW l/sec

SOLIDS HANDLING mm

WEIGHT kg

26.6

DELIVERY STATUS SCAN TO SHOP ONLINE

SP20 / SP21 (ATEX)

SP20 and SP21 (ATEX) are compact and powerful hydraulic trash pumps with unbeatable power, size and weight ratios. With their robust construction they require minimal maintenance and have the possibility to run dry without damages.

30 25 20 15

A - Hydraulic flow figure

Designed with high resistance to impacts and abrasion, and with its small dimensions and lightweight construction, these pumps make an ideal option for the smallest of applications including trenches and SP21 (ATEX) manholes.

5 0

1.6

3.3

6.6

8.3

11.6

13.3

CAPACITY / l/sec

SP20

BENEFITS

FEATURES

– Stainless steel pump body – Cast iron impeller – Flow capacity up to 13.3l/sec – Head up to 35m ( Water Pressure 3.5 BAR) PUMP TYPE

35 HEAD / m

With implicit safety thanks to the absence of electricity, and their ability to handle thick and muddy liquids, these pumps can be powered by small power packs, mini excavators and trucks, making them ideal for the construction industry.

PERFORMANCE DATA

PRODUCT CODE

CURVE

SP20

PD/TT-SP20

SP21

PD/TT-SP21

Same day dispatch.

– Designed for reliability and long life – Easy to maintain and repair – Double mechanical seal – Lightweight DISCHARGE

FLOW l/sec

SOLIDS HANDLING mm

WEIGHT kg

13.3

inch

Lead time may apply.

ttpumps.com

DELIVERY STATUS SCAN TO SHOP ONLINE

+44 (0) 1630 647200 57

Contractors Pumps SP35 / SP45

High performance, 3" and 4", submersible and hydraulically powered trash water pumps. The SP35 pump has a stainless steel impeller and body, with an exclusive single channel closed impeller and the ability to pump very abrasive fluids and bentonite. The pump is available with a hydraulic motor in cast iron and with an ATEX certification for pumping flammable liquids or for use in mines and explosive applications. The SP45 is a professional trash pump designed for pumping slurries, trash waters and thick liquids with density concentration in the fluid up to 25% and suspended solids up to 70mm. The pump body is fabricated in stainless steel with a urethane wear plate, designed to ensure durability and resistance to abrasivity, impacts and rust. The pump is ideal for large movements of water, in emergencies after floods, in military works, for sewage treatment facilities and manhole dewatering.

PERFORMANCE DATA

40 35 30

HEAD / m

CONTRACTORS PUMPS - 3

Hydraulic Pumps

A – 20l/min*

20 15 10

B – 30l/min*

B – 38l/min*

A – 30l/min*

0 0

4.1

8.3

12.5

16.6

20.8

29.1

33.3

37.5

41.6

45.8

CAPACITY / l/sec

Please note: *Hydraulic fluid flow rate

FEATURES

– Possibility to run dry without damages – Robust construction and minimal maintenance needs – Implicit safety thanks to the absence of electricity, zero problems of priming – The pumping chamber can be open in a few seconds for inspection and cleaning

BENEFITS

– Designed for reliability and long life – Easy to maintain and repair – Double mechanical seal – Lightweight SCAN TO SHOP ONLINE

SP35 PUMP TYPE

PRODUCT CODE

DISCHARGE mm

inch

FLOW l/sec

SOLIDS HANDLING mm

WEIGHT kg

SP35

PD/TT-SP35

26.6

SP45

PD/TT-SP45

100

ttpumps.com 58

CURVE

SP45

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

Contractors Pumps SP55 / SP65

The SP55 and SP65 are high performance trash pumps for large dewatering works, rental activity, civil protection, the military sector, sewage treatment plants and where it is necessary to quickly move large volumes of water and heavily loaded fluids.

With implicit safety thanks to the absence of electricity, and their capability of handling thick and muddy liquids, these pumps can be powered by small power packs, mini excavators and trucks, making them ideal for the construction industry.

B – 80l/min*

30 HEAD / m

The pumps' main characteristics are their high power and impeller which has knives that can cut suspended solids like sea weeds, straw, rags, ropes, sediments and various linear fibres. The hydraulic function gives optimised operation and performance.

PERFORMANCE DATA

B – 100l/min*

25 20 15 10

A – 40l/min*

5 0

16.6

33.3

Please note: *Hydraulic fluid flow rate

66.6

B – 60l/min* A – 60l/min* A – 50l/min*

83.3

100

116.6 133.3

CAPACITY / l/sec

FEATURES

– Head: SP55: Up to 29m, SP65: Up to 39m – Stainless steel pump body – Steel impeller

BENEFITS

– Designed for reliability and long life – Easy to maintain and repair – Double mechanical seal – Rugged SCAN TO SHOP ONLINE

SP55

PUMP TYPE

PRODUCT CODE

CURVE

SP55

PD/TT-SP55

SP65

PD/TT-SP65

Same day dispatch.

DISCHARGE

FLOW l/sec

SOLIDS HANDLING mm

WEIGHT kg

91.6

133.3

135

inch

125

150

Lead time may apply.

SP65

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 59

CONTRACTORS PUMPS - 3

Hydraulic Pumps

Notes

ttpumps.com 60

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Engine Driven Pumps

SECTION 04 ENGINE DRIVEN PUMPS

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 61

Engine Driven Pumps SCR RANGE

These powerful pumps are light by design, with a combination of aluminium for the outer casing and cast iron for the impeller and wear plate. A mechanical seal ensures a perfect shaft sealing and combined with their robust design, means the absolute minimum maintenance is required.

FEATURES

– Clean and grey water handling – 4-stroke Honda engine – 5mm solids handling – Self-priming

– Built for reliability and long life – Easy to maintain and repair – Great site partner – Honda engine

35 30 HEAD / m

BENEFITS

PERFORMANCE DATA

25 20 15 10 5 0

3.3

6.6

13.3

16.6

23.3

26.6

CAPACITY / l/sec

ACCESSORIES INCLUDED

SCR-50HX

SCR-254HX

SCR-80HX

PUMP TYPE

PRODUCT CODE

CURVE

SCR254HX SCR50HX SCR80HX

PA/SCR-254HX PA/SCR-50HX PA/SCR-80HX

A\ B\ C\

DISCHARGE mm

inch

25 50 80

1 2 3

– Engine tool kit- 1 set – Strainer- 1 pcs – Hose coupling- 2pcs – Hose band- 3 pcs ENGINE TYPE

HORSE POWER

HONDA, PETROL 4-S HONDA, PETROL 4-S HONDA, PETROL 4-S

1.1 4.0 5.5

SOLIDS HANDLING mm 5 5 5

WEIGHT kg

DELIVERY STATUS

6 23.5 30

SCAN TO SHOP ONLINE

SST RANGE (SEMI TRASH)

The SST range of engine driven self-priming pumps are light in construction featuring aluminium for the outer casing and cast iron for the impeller and wear plate. The pumps are suitable for de-watering, washdown, irrigation and many more applications. 30m maximum head and 21.6/sec maximum capacity.

FEATURES

– Simple maintenance – Lightweight – 4-stroke Honda engine – Heavy duty construction – Excellent self-priming

PERFORMANCE DATA

30 25 HEAD / m

ENGINE DRIVEN PUMPS - 4

Contractors Pumps

20 15 10 5

BENEFITS

– Built for reliability – Easy to maintain and repair – Great site partner – Honda engine

3.3

6.6

13.3

16.6

23.3

CAPACITY / l/sec

SST-50

ACCESSORIES INCLUDED – Engine tool kit- 1 set – Strainer- 1 pcs – Hose coupling- 2pcs – Hose band- 3 pcs

SST-80 PUMP TYPE SST-50 SST-80

ttpumps.com 62

PRODUCT CODE

CURVE

PA/SST-50HX PA/SST-80HX

A\ B\

DISCHARGE mm

inch

50 80

2 3

+44 (0) 1630 647200

ENGINE TYPE

HORSE POWER hp

SOLIDS HANDLING mm

HONDA, PETROL 4-S HONDA, PETROL 4-S

4.0 5.5

20 20

Same day dispatch.

WEIGHT DELIVERY kg STATUS 24 27

SCAN TO SHOP ONLINE

Lead time may apply.

Engine Driven Pumps SWT RANGE (TRASH)

The SWT range of powerful engine driven self-priming pumps are light in construction, featuring aluminium for the outer casing and cast iron for the impeller and wear plate. The pumps are suitable for de-watering, washdown, irrigation and many more applications. 30m maximum head and 21.6l/sec maximum.

25 HEAD / m

FEATURES

– Excellent solids handling – Simple maintenance – Lightweight – 4-stroke Honda engine – Heavy duty construction

20 15 10 5

BENEFITS

– Built for reliability – Easy to maintain – Great site partner – Honda engine

3.3

6.6

13.3

16.6

23.3

CAPACITY / l/sec

SWT-80H

ACCESSORIES INCLUDED – Engine tool kit- 1 set – Strainer- 1 pcs – Hose coupling- 2pcs – Hose band- 3 pcs

SWT-50H PUMP TYPE SWT-50H SWT-80H

PERFORMANCE DATA

ENGINE DRIVEN PUMPS - 4

Contractors Pumps

PRODUCT CODE

CURVE

PA/SWT-50HX PA/SWT-80HX

A\ B\

DISCHARGE mm

inch

50 80

2 3

ENGINE TYPE

HORSE POWER hp

SOLIDS HANDLING mm

WEIGHT kg

HONDA, PETROL 4-S HONDA, PETROL 4-S

5.5 8.0

25 35

34 57

DELIVERY STATUS SCAN TO SHOP ONLINE

SMD RANGE (DIAPHRAGM)

Heavy duty engine driven diaphragm pump range for construction work, pumping water containing sand, stone and muddy water and many more applications.

FEATURES

15 HEAD / m

– Compact design and lightweight – Pump body and gear case are made by heavy-duty die cast aluminium, to keep the weight down for easy transport between job sites – Easy Maintenance – Closed coupled high-performance engine – Capable of running dry without damage

10 5

BENEFITS

– Built for reliability – Easy to maintain – Great site partner – Honda engine

PERFORMANCE DATA

2.1

4.2

6.33

8.4

CAPACITY / l/sec

SMD 50HX

ACCESSORIES INCLUDED – Engine tool kit- 1 set – Strainer- 1 pcs – Hose coupling- 2pcs – Hose band- 3 pcs

SMD 80HX PUMP TYPE SMD50X SMD80X

PRODUCT CODE

CURVE

PA/SMD-50HX PA/SMD-80HX

A\ B\

Same day dispatch.

DISCHARGE mm

inch

50 80

2 3

Lead time may apply.

ENGINE TYPE

HORSE POWER hp

SOLIDS HANDLING mm

WEIGHT kg

HONDA, PETROL 4-S HONDA, PETROL 4-S

4.0 5.5

25 35

37.5 45

ttpumps.com

DELIVERY STATUS SCAN TO SHOP ONLINE

+44 (0) 1630 647200 63

Notes

ttpumps.com 64

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Agricultural & Environmental

SECTION 05 AGRICULTURAL & ENVIRONMENTAL

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 65

AGRICULTURAL - 5

Agricultural & Environmental B A range of powerful washdown sets suitable for general washing where reliability and durability are a must. A full kit, comprising of a pump mounted on a stainless steel base, complete with autostart/stop, hose, fittings and fully adjustable nozzle.

FEATURES

– Heavy duty robust design – Compact – Heavy duty stainless steel base – Automatic stop / start – Dry run protected – Heavy duty adjustable brass nozzle – 25 metre high quality hose – Custom built versions available on request

BENEFITS

– Designed and manufactured in the UK – Designed for long life – Easy to maintain and repair – Easy to use

T-T WASHDOWN

T-T WASHDOWN HIGH PRESSURE

SCAN TO WATCH T-T WASHDOWN IN ACTION

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

OUTPUT Amps

FLOW l/min

HORSE MAX MAX POWER PRESSURE PRESSURE Bar MPa

MAX PRESSURE PSI

RPM

VOLTAGES

T-T WASHDOWN 1 T-T WASHDOWN 2 T-T WASHDOWN 3

TT/WASHDOWN1 TT/WASHDOWN2 TT/WASHDOWN3

9.1 9.1 14.6

1.1 1.1 2.2

40 60 90

1.5 1.5 3.0

3.9 4.6 6.4

0.39 0.46 0.64

57 67 93

2900 2900 2900

230V/1Ph/50Hz 230V/1Ph/50Hz 230V/1Ph/50Hz

T-T WASHDOWN 4

TT/WASHDOWN4HP

6.7

3.0

5.7

170

17.0

2466

1450

400V/3Ph/50Hz

BEFORE

ttpumps.com 66

DELIVERY STATUS

AFTER

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

SCUM SKIMMER

Designed to be a sustainable, efficient and reliable method of collecting floating debris from liquid. Ideal for a variety of domestic, industrial and environmental applications. This range offers an effective method of collecting scum and floating matter from liquid surfaces, having the mobility to be guided into areas where skimming is most necessary.

FEATURES

– Junior- AISI 304 stainless steel & reinforced plastic construction – Senior - Pump constructed in cast iron. Frame constructed in AISI 304 stainless steel – Up to 30mm free passage – 0.15kW, 0.25kW and 1.25kW electric motor – Ø50mm discharge connection – Electrical variants 110V/1Ph or 230V/1Ph (both 50Hz) (Scum- Skimmer Junior) – Electrical variants 230V/1Ph or 400V/3Ph (both 50Hz) (Scum- Skimmer Senior)

SCUM SKIMMER JUNIOR

BENEFITS

– Built for reliability – Fully repairable – Great performance – Robust design

SCUM SKIMMER SENIOR

SCAN TO SHOP ONLINE

PERFORMANCE DATA

14 12

8 HEAD / m

HEAD / m

6 4

2 0

1.66

3.33

6.66

8.33

C 0

1.38

CAPACITY / l/sec

8.33

Scum Skimmer Senior

PRODUCT CODE

CURVE

Scum Skimmer 150 Junior with Goliath Super 150 Pump

TT/SS-150JNR

Scum Skimmer 250 Junior with Goliath Super 250 Pump

TT/SS-250JNR

Scum Skimmer Senior with TT505 Pump

TT/SS-SNR

Same day dispatch.

5.55

CAPACITY / l/sec

Scum Skimmer Junior

PUMP TYPE

2.77

OUTPUT

FREE PASSAGE mm

OUTLET mm

WEIGHT kg

0.15

0.25

1.25

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 67

AGRICULTURAL - 5

Agricultural & Environmental

OXYPLATE

High performance membrane diffusers for municipal and industrial water treatment. Designed for installation in oxidation tanks in civil and industrial aeration systems, they are fitted with a perforated membrane to allow passage of fine or medium sized bubbles. Easy to install with either the whole diffuser or just the membrane being quickly replaced in an existing plant.

FEATURES

BENEFITS

OXYGEN TRANSFER / M. SUBMERGENCE

50 mbar

SOTE / %/m

– Durable heavy duty design – Membrane EPDM LP, body PP GF30 – Design flow 9” 2 – 10 Nm3/h, 12” 2 – 12 Nm3/h – Connection 3/4” NPT – Excellent self-priming

8 6

– Easy to use – Superior materials used

30 B

2 0

AIRFLOW / Nm3/h

PUMP TYPE

PRODUCT CODE

CURVE

MIN OPERATING FLOW

MAX OPERATING FLOW

MAX OVERLOAD FLOW

OPERATING TEMPERATURE

WEIGHT kg

OPERATION MODE

OXYPLATE 9”

PZS/9023.002

0-80

0.7

Intermittent / Continuous

OXYPLATE 12”

PZS/9023.004

0-80

1.2

Intermittent / Continuous

DELIVERY STATUS

SCAN TO SHOP ONLINE

OXYTUBE - TUBLUAR AIR DIFFUSERS

Recommended for installation in active sludge plants, aerobic digesters, reservoirs and aquaculture in general, with a 2” (50mm) diameter for optimum performance. Greater diameter ensures that a larger surface area is in contact with liquid, reducing the possibility of coalescence. Quick, convenient anchorage to the main pipe guarantees simple, economical plant construction.

FEATURES

OXYGEN TRANSFER / M. SUBMERGENCE

– Heavy duty design – Membrane EPDM LP body PP GF30 – Connection 3/4” NPT

– Easy to use – Superior materials used

mbar

12 10 8 6

40 35 30

2 0

BENEFITS

OXYGEN TRANSFER / M. SUBMERGENCE

SOTE / %/m

AGRICULTURAL - 5

Agricultural & Environmental

AIRFLOW / Nm3/h

PUMP TYPE

PRODUCT CODE

CURVE

MAX OPERATING FLOW RATE

MIN OPERATING FLOW RATE

WEIGHT kg

TUBE 500 TUBE 750 TUBE 1000

PZS/9023.005 PZS/9023.006 PZS/9023.007

A\ A\ A\

0.8

2 3

1.1 1.3

6 9 12

ttpumps.com

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

OXYGEN RANGE

The Jetoxy range of submerged aerators allows for the injection of oxygen into liquids, improving water and effluent health by satisfying the demand for oxygen while also mixing the medium for optimal oxygen distribution. The Jetoxy is ideal for installation in effluent treatment plants and emergency installations where oxygen levels need lifting quickly.

FEATURES

BENEFITS

– Excellent solids handling – Simple maintenance – Lightweight – Heavy duty construction

– Designed for long life – Great performance – Easy to install

PERFORMANCE DATA

OXYGEN TRANSFER SOTR / kg/h

Air Intake

AIR INTAKE / kg/h

25 E 20

C A

0.5

1.0

PERFORMANCE DATA

1.0

Oxygen Transfer SOTR

0.9

0.8

0.7 C

0.6

B 0.5 A

1.5

2.0

0.4

2.5

0.5

1.0

DEPTH OF LIQUID / m

1.5

2.0

2.5

DEPTH OF LIQUID / m

PERFORMANCE DATA

AGRICULTURAL - 5

Agricultural & Environmental

PERFORMANCE DATA

2.0

I OXYGEN TRANSFER SOTR / kg/h

AIR INTAKE / Sm3/h

40 35 30 I 25 H

1.6 H 1.2

0.8

G 15

0.4 0

0.5

1.0

1.5

2.0

2.5

3.0

0.5

1.0

DEPTH OF LIQUID / m

PUMP TYPE

2.0

WEIGHT kg

OXY 50 SYSTEM

PZ/7027.015 OXY JET 50 – ejector coupled to submersible electric pump

11.50

OXY JET DGO 50/2 OXY JET DGO 75/2 OXY JET DGO 100/4 OXY JET DGO 100/2 OXY JET DGO 150/2 OXY JET DGO 200/2 OXY JET DRO 100/2 OXY JET DRO 150/2 OXY JET DRO 200/2

PZ/7029.004 PZ/7029.005 PZ/7029.009 PZ/7029.006 PZ/7029.007 PZ/7029.008 PZ/7029.001 PZ/7029.002 PZ/7029.003

10 10 10 10 10 10 10 10 10

27.5 28 30.5 30 31.5 32.5 30.5 31.5 32.5

Same day dispatch.

2.5

3.0

DEPTH OF LIQUID / m

FREE CABLE PASSAGE m mm OXY 50 – OXY body, sliding flange and pipe guide PZ/9009.006 OXY 50 SYSTEM – OXY body, sliding flange, pipe guide and base

OXY 50

PRODUCT CODE

1.5

CURVE

OUTPUT

amp

A\ B\ C\ D\ E\ F\ G\ H\ I\

1.1 1.4 2.2 2.3 2.5 3.6 2.3 2.7 3.6

Lead time may apply.

0.37 0.55 0.7 0.88 1.1 1.5 0.88 1.1 1.5

DISCHARGE

50 50 50 50 50 50 50 50 50

inch

2 2 2 2 2 2 2 2 2

40 40 50 50 50 50 15 15 15

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 69

TBM MIXER RANGE

These horizontal submersible mixers are recommended for homogenizing processes in sewage treatment plants, slurry pits and digesters. The design, construction and the use of propellers with a self-cleaning profile are a guarantee of durability and efficiency, even in the most extreme utilisation conditions.

PERFORMANCE DATA

10 8 6 4 HEAD / m

FEATURES

– Cast iron & stainless steel construction – Mechanical seal – 1.5 - 25kW output – Max. submergence depth 20m – Max. solid content in liquid 12% – Max temperature of liquid 40°C – Coupled with 4 and 6 pole motors – Available with seal leak probe – ATEX versions available – Guide rail options

2 0

A B CDE

K M

-2 -4 -6 -8 -10

100

BENEFITS

– Wear resistant, designed for long life – Fully repairable – Superior performance

4 POLE MOTOR

6 POLE MOTOR

PUMP TYPE

ATEX VERSIONS

AGRICULTURAL - 5

Agricultural & Environmental

CURVE

OUTPUT amp

CAPACITY m3/h

RPM n

CABLE m

WEIGHT kg

TBM 1.5/6N 400V/3Ph

PCR/TBM1.5/6/3

4.2

1.5

643

925

TBM 2.2/6N 400V/3Ph

PCR/TBM2.2/6/3

5.7

2.2

876

940

TBM 2.2/4 400V/3Ph

PCR/TBM2.2/4/3

4.9

2.2

1333

323

TBM 3/4 400V/3Ph

PCR/TBM3.0/4/3

6.4

3.0

1581

323

TBM 4/4 400V/3Ph

PCR/TBM4.0/4/3

9.1

4.0

2146

320

TBM 5.5/4N 400V/3Ph

PCR/TBM5.5/4/3

11.4

5.5

2391

326

109

TBM 7.5/4N 400V/3Ph

PCR/TBM7.5/4/3

15.3

7.5

3254

328

115

TBM 9/4N 400V/3Ph

PCR/TBM9.0/4/3

19.2

9.0

3628

328

123

TBM 11/4 400V/3Ph

PCR/TBM11.0/4/3

22.4

11.0

3977

351

183

TBM 15/4N 400V/3Ph

PCR/TBM15.0/4/3

15.0

5335

351

193

TBM 18.5/4N 400V/3Ph

PCR/TBM18.5/4/3

18.5

6884

354

203

TBM 22/4 400V/3Ph

PCR/TBM22.0

22.0

9165

275

314

TBM 25/4 400V/3Ph

PCR/TBM25.0

25.0

10138

275

325

TBMex 2.2/4 400V/3Ph

PCR/TBMEX2.2/4/3

4.9

2.2

1333

323

TBMex 3/4 400V/3Ph

PCR/TBMEX3/4/3

6.4

3.0

1581

323

TBMex 4/4 400V/3Ph

PCR/TBMEX4/4/3

9.1

4.0

2146

320

TBMex 5.5/4 400V/3Ph

PCR/TBMEX5.5/4/3

11.4

5.5

2391

326

112

TBMex 7.5/4 400V/3Ph

PCR/TBMEX7.5/4/3

15.3

7.5

3254

328

118

TBMex 9/4 400V/3Ph

PCR/TBMEX9/4/3

19.2

9.0

3628

328

126

TBMex 11/4 400V/3Ph

PCR/TBMEX11/4/3

22.4

11.0

3977

351

187

TBMex 15/4 400V/3Ph

PCR/TBMEX15/4/3

15.0

5335

351

197

TBMex 18.5/4 400V/3Ph PCR/TBMEX18.5/4/3

18.5

6884

354

207

ttpumps.com 70

PRODUCT CODE

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

TBX-E MIXER RANGE

These submersible horizontal mixers, fully manufactured in AISI 316 stainless steel, are recommended for homogenizing processes in sewage treatment plants and applications in very corrosive liquids. Being designed with a self-cleaning profile guarantees durability and efficiency even in the most extreme utilisation conditions.

PERFORMANCE DATA

3 2 1 0

FEATURES

– 316 stainless steel construction – Mechanical seal with twin lipseal on larger models – Max. submergence depth 20m – Max. solid content in liquid 8% – Max temperature of liquid 40°C – pH 5-12 – High efficiency motor

AGRICULTURAL - 5

Agricultural & Environmental

-1 -2 -3

BENEFITS

6 POLE MOTOR

4 POLE MOTOR

– Fully repairable – High efficiency – Superior materials used PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT

RPM n

CAPACITY m3/h

CABLE m

WEIGHT kg

amp

TBX 0.75/4N 400V/3Ph

PCR/TBX0.75/4/3

1.8

0.75

TBX 1.1/4N 400V/3Ph

PCR/TBX1.1/4/3

1430

251

2.6

1.1

1425

418

TBX 1.5/6N 400V/3Ph TBX 2.2/6N 400V/3Ph

PCR/TBX1.5/6/3 PCR/TBX2.2/6/3

C\ D\

3.5 5.1

1.5 2.2

950 960

840 862

10 10

58 58

TBX 3/6N 400V/3Ph

PCR/TBX3/6/3

980

1256

TBX 4/6N 400V/3Ph

PCR/TBX4/6/3

9.3

970

1448

DELIVERY STATUS

SCAN TO SHOP ONLINE

AF FLOW MIXER RANGE

These horizontal submersible flow mixers are recommended for homogenizing processes in anerobic digestion and sewage treatment plants. Being designed with a self-cleaning profile guarantees durability and efficiency even in the most extreme conditions.

6 4

FEATURES

2 m

– Cast iron construction – Single mechanical seal with twin lipseal – Max. submergence depth 20m – Max. solid content in liquid 8% – Max. temperature of pumped liquid 40°C – Superior planetary gearbox

6 POLE MOTOR

-4 -6 -8

– Designed for long life – Fully repairable – High efficiency

4 POLE MOTOR

-2

BENEFITS

PUMP TYPE

PERFORMANCE DATA

PRODUCT CODE

CURVE

OUTPUT amp

RPM n

CAPACITY m3/h

CABLE m

WEIGHT kg

AF 1.5/6

PCR/AF1.5/6

4.2

1.5

32.3

11490

106

AF 2.2/6

PCR/AF2.2/6

5.9

2.2

32.8

13594

107

AF 3/4 AF 4/4

PCR/AF3/4 PCR/AF4/4

C\ D\

6.4 9.1

3 4

34.1 33.7

14716 16250

10 10

122 125

AF 5.5/4N

PCR/AF5.5/4

12.5

5.5

34.4

17803

150

DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: Additional information required / bespoke built item, contact us for more information

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 71

Agricultural & Environmental PTS 40 CHOPPER PUMP

A submersible chopper pump with multi-channel impeller and double chopping system.

FEATURES

HEAD / m

– Automatic or manual versions available – Horizontal or vertical configuration – Available in single or three phase

BENEFITS

– Good reliability – Popular product – Robust build

18 16 14 12 10 8 6 4 2 0

PERFORMANCE DATA

B A 0

CAPACITY / l/sec

PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT 230V

400V

PTS 0.75-40

PCR/PTS0.75-40

PTS 1.1-40

PCR/PTS1.1-40

7.3

amp

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

6.25

7.2

inch

HEAD m

CAPACITY l/sec

1.9

0.75

1½

13.5

2.5

1.1

1½

17.5

DELIVERY STATUS

SCAN TO SHOP ONLINE

PTS 65 - 150 RANGE

The PTS range of heavy-duty chopper pumps has been designed for farming and biogas applications and can handle up to 12% solids. For example, when used within slurry from cattle sheds, it solves the problem of pumping heavy solids that contains sawdust and straw, etc. which causes problems for standard pumps. The heavy-duty cutting system consists of a serrated suction cover and cutting blades, and moving into an open multi-channel impeller for a truly hassle-free design. This range has been used in farming, abattoirs, biogas plants and food processing. We can offer a standard motor or full ATEXapproved designs. We can also provide specialist coatings for abrasive applications and for high and low pH levels.

FEATURES

HEAD / m

AGRICULTURAL - 5

Chopper Pumps

48 44 40 36 32 28 24 20 16 12 8 4 0

PERFORMANCE DATA

A F D 0

J K L

E I 40

– Cast iron construction – Heavy duty double cutting system – Double mechanical seal in oil bath – Available with seal leak – Nitec coating available

O MN 100

CAPACITY / l/sec

BENEFITS

– Designed for reliability and long life – Easy to maintain and repair – Popular product – Wear parts readily available SCAN TO SHOP ONLINE

PTS 80N SERIES

PTS 100 - 150 SERIES

Please note: 150 Series new and improved hydraulic design with increased flow rates

ttpumps.com 72

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Agricultural & Environmental PTS 65 - 150 RANGE PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT

DISCHARGE

amp

MAXIMUM

inch

HEAD m

CAPACITY l/sec

CABLE m

WEIGHT kg

PTS 7.5-65 400V/3Ph

PCR/PTS7.5-65/3

15.3

7.5

2½

22.3

125

PTS 9-65 400V/3Ph

PCR/PTS9-65/3

19.2

2½

24.8

130

PTS 11-65 400V/3Ph

PCR/PTS11-65/3

22.4

2½

28.8

191

PTS 2.2-80N 400V/3Ph

PCR/PTS2.2-80N

4.9

2.2

10.7

PTS 3-80N 400V/3Ph

PCR/PTS3-80N

6.4

3.0

12.9

PTS 4-80N 400V/3Ph

PCR/PTS4-80N

9.1

4.0

14.7

PTS 15-80N 400V/3Ph

PCR/PTS15-80N

31.2

15.0

38.9

168.5

PTS 18.5-80N 400V/3Ph

PCR/PTS18.5-80N

36.5

18.5

45.5

183

PTS 4-100 400V/3Ph

PCR/PTS4-100/3

9.1

4.0

100

9.8

PTS 5.5-100 400V/3Ph

PCR/PTS5.5-100/3

11.4

5.5

100

122

PTS 7.5-100 400V/3Ph

PCR/PTS7.5-100/3

15.3

7.5

100

14.7

128

PTS 9-100 400V/3Ph

PCR/PTS9-100/3

19.2

9.0

100

16.1

133

PTS 11-150 400V/3Ph

PCR/PTS11-150/3

22.4

11.0

150

12.9

105

213

PTS 15-150 400V/3Ph

PCR/PTS15-150/3

15.0

150

15.5

111

226

PTS 18.5-150 400V/3Ph

PCR/PTS18.5-150/3

18.5

150

129

229

DELIVERY STATUS

ATEX VERSIONS PUMP TYPE

PRODUCT CODE

CURVE

PCR/PTSEX7.5-65/3

ATEX Version PTSEX 7.5-65 400V/3Ph

OUTPUT

DISCHARGE

MAXIMUM

CABLE m

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

15.8

7.5

2½

22.3

125

PTSEX 9-65 400V/3Ph

PCR/PTSEX9-65/3

2½

24.8

130

PTSEX 11-65 400V/3Ph

PCR/PTSEX11-65/3

23.5

2½

28.8

191

PTSEX 2.2-80N 400V/3Ph

PCR/PTSEX2.2-80N

5.3

2.2

10.7

PTSEX 3-80N 400V/3Ph

PCR/PTSEX3-80N

6.4

3.0

12.9

PTSEX 4-80N 400V/3Ph

PCR/PTSEX4-80N

9.1

4.0

14.7

PTSEX 15-80N 400V/3Ph

PCR/PTSEX15-80N

31.2

15.0

38.9

168.5

PTSEX 18.5-80N 400V/3Ph

PCR/PTSEX18.5-80N

36.5

18.5

45.5

183 88

PTSEX 4-100 400V/3Ph

PCR/PTSEX4-100/3

9.1

4.0

100

9.8

PTSEX 5.5-100 400V/3Ph

PCR/PTSEX5.5-100/3

12.5

5.5

100

122

PTSEX 7.5-100 400V/3Ph

PCR/PTSEX7.5-100/3

15.8

7.5

100

14.7

128

PTSEX 9-100 400V/3Ph

PCR/PTSEX9-100/3

9.0

100

16.1

133

PTSEX 11-150 400V/3Ph

PCR/PTSEX11-150/3

23.5

11.0

150

12.9

105

213

PTSEX 15-150 400V/3Ph

PCR/PTSEX15-150/3

15.0

150

15.5

111

226

PTSEX 18.5-150 400V/3Ph

PCR/PTSEX18.5-150/3

18.5

150

129

229

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 73

AGRICULTURAL - 5

Chopper Pumps

Agricultural & Environmental PTS 100K - 200 RANGE

The PTS-K range of high head heavy-duty submersible chopping pumps are ideal for particularly heavy applications that require a preliminary chopping of the solids.

The PTS 200 series is coupled with the same heavy-duty chopping system, but provides a low head high flow performance.

BENEFITS

– Good reliability – Popular product – Robust build – Wear parts readily available

– Cast iron construction – Heavy duty double cutting system – Double mechanical seal in oil bath – Available with seal leak – Nitec coating available

Both ranges use an open multi-channel impeller and double cutting system in the suction inlet.

FEATURES

PERFORMANCE DATA

HEAD / m

AGRICULTURAL - 5

Chopper Pumps

E D

10 0

F 0

120

160

J 200

CAPACITY / l/sec

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

PTS 15-100K 400V/3Ph

PCR/15-100K/3

PTS 25-100K 400V/3Ph PTS 30-100K 400V/3Ph

OUTPUT

DISCHARGE

MAXIMUM

FREE PASSAGE mm

CABLE m

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

15.0

100

445

PCR/25-100K/S

25.0

100

463

PCR/30-100K/3

30.0

100

475

PTS 37-100K 400V/3Ph

PCR/37-100K/3

3.7

100

565

PTS 45-100K 400V/3Ph

PCR/45-100K/3-1

45.0

100

9.5

150

579

PTS 15-200 400V/3Ph

PCR/15-200/3

15.0

200

150

475

PTS 18.5-200 400V/3Ph

PCR/18.5-200/3

18.5

200

161

490

PTS 22-200 400V/3Ph

PCR/22-200/3

22.0

200

165

565

PTS 25-200 400V/3Ph

PCR/25-200/3

25.0

200

180

577

PTS 30-200 400V/3Ph

PCR/30-200/3

30.0

200

195

601

ETO 40

DELIVERY STATUS

Multi-channel impeller and double chopping system with frame for standard electric motor. Ideal for livestock, biogas and industrial applications.

FEATURES

– Max capacity: 7 l/sec – Head: 17 m – Motor power: 0.75 - 1.1 kW – Suction: 65 mm – Discharge: 40 mm PUMP TYPE

BENEFITS

– IP 55 Protection – F class insulation – Max liquid temperature: 60°C

PRODUCT CODE

OUTPUT

– Built for reliability – Fully repairable – Superior performance

DISCHARGE

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

WEIGHT kg

ETO 0.75-40 400V.3Ph

PCR/ETO0.75-40/3

1.9

0.75

1½

13.5

ETO 1.1-40 400V.3Ph

PCR/ETO1.1-40/3-1

2.45

1.1

1½

17.5

24.5

ttpumps.com 74

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

Agricultural & Environmental ETO 65-200 RANGE

The ETO 65-200 range of electric horizontal chopper pumps is ideal for particularly heavy duty applications. These pumps are mounted on a frame and coupled with standard electric motors by a flexible coupling. All versions are equipped with a multi vane impeller and double chopping system in the suction inlet.

110 100 90

HEAD / m

– Cast iron construction – Mechanical seal with oil bath – Heavy duty double chopping system – Heavy duty chopping action – Optional extras: twin mechanical seal on larger units – Single cutting version available on 200 series

70 60 G

20 10 0

K 0

H 10

N JL M 40 50

Q P 100

CAPACITY / l/sec

HEAD / m

– Built for reliability – Fully repairable – Superior performance

Please note: 150 Series new and improved hydraulic design with increased flow rates

2 POLE MOTOR

BENEFITS

4 POLE MOTOR

FEATURES

6 POLE MOTOR

PERFORMANCE DATA

120

AGRICULTURAL - 5

Chopper Pumps

PUMP TYPE

PRODUCT CODE

CURVE

ETO 30-65 400V/3Ph

PCR/ETO 30-65/3

ETO 37-65 400V/3Ph ETO 45-65 400V/3Ph

24 22 20 18 16 14 12 10 8 6 4 2 0

PERFORMANCE DATA

100

120

140

160

180

OUTPUT

DISCHARGE

MAXIMUM

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

52.6

2½

72.9

510

PCR/ETO 37-65/3

64.4

2½

79.6

540

PCR/ETO 45-65/3

77.6

2½

86.8

566

ETO 75-65 400V/3Ph

PCR/ETO 75-65/3

128.2

2½

112

580

ETO 15-80N 400V/3Ph

PCR/ETO 15-80n/3

27.2

38.9

276

ETO 18.5-80N 400V/3Ph PCR/ETO 18.5-80n/3

32.9

18.5

45.5

293

ETO 22-80N 400V/3Ph

PCR/ETO 22-80n/3

38.9

51.3

329

ETO 2.2-80N 400V/3Ph

PCR/ETO 2.2-80n/3

4.83

2.2

10.7

132

ETO 3-80N 400V/3Ph

PCR/ETO 3-80n/3

6.39

12.9

133

ETO 4-80N 400V/3Ph

PCR/ETO 4-80n/3

8.35

14.7

137

ETO 4-100 400V/3Ph

PCR/ETO 4-100/3

8.35

100

9.8

166

ETO 5.5-100 400V/3Ph

PCR/ETO 5.5-100/3

11.1

5.5

100

190

ETO 7.5-100 400V/3Ph

PCR/ETO 7.5-100/3

14.8

7.5

100

14.7

191

ETO 9-100 400V/3Ph

PCR/ETO 9-100/3

100

16.1

203

ETO 11-150 400V/3Ph

PCR/ETO 11-150/3

21.4

150

12.9

105

374

ETO 15-150 400V/3Ph

PCR/ETO 15-150/3

28.5

150

15.5

111

382

ETO 18.5-150 400V/3Ph PCR/ETO 18.5-150/3

34.5

18.5

150

121

411

ETO 22-200 400V/3Ph

PCR/ETO22-200/3

42.5

200

14.8

140

800

ETO 30-200 400V/3Ph

PCR/ETO30-200/3

200

17.5

161

860

ETO 37-200 400V/3Ph

PCR/ETO37-200/3

65.8

200

19.7

180

950

ETO 45-200 400V/3Ph

PCR/ETO45-200/3

200

22.5

200

1150

Same day dispatch.

Lead time may apply.

200

220

CAPACITY / l/sec

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 75

Agricultural & Environmental ETV RANGE

The ETV range of electric vertical chopper pumps is ideal for particularly heavy duty applications. These pumps are mounted on a vertical frame, which includes the suction inlet, and they are coupled with standard electric motors by a flexible coupling.

PERFORMANCE DATA

60 50

All versions are equipped with a multi vane impeller and double chopping system in the suction. These pumps are recommended for applications that require an adequate chopping of the solid materials present in the liquid being pumped.

HEAD / m

FEATURES

– Cast iron construction – Single mechanical seal in oil bath – Heavy-duty double chopping system – Optional extras: twin mechanical seal – Smaller footprint than the ETO series

E D

10 0

M 120

G 160

J 200

CAPACITY / l/sec

BENEFITS

– Good reliability – Popular product – Robust build SCAN TO SHOP ONLINE

2 POLE MOTOR

4 POLE MOTOR

PUMP TYPE

4 POLE MOTOR

AGRICULTURAL - 5

Chopper Pumps

PRODUCT CODE

CURVE

OUTPUT

DISCHARGE

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

ETV 2.2-80N 400V/3Ph

PCR/ETV 2.2-80N/3

4.83

2.2

10.7

ETV 3-80N 400V/3Ph

PCR/ETV 3-80N/3

6.39

3.0

12.9

ETV 4-80N 400V/3Ph

PCR/ETV 4-80N/3

8.35

4.0

14.7

ETV 15-80N 400V/3Ph

PCR/ETV 15-80N/3

27.2

15.0

38.9

ETV 18.5-80N 400V/3Ph PCR/ETV 18.5-80N/3

32.9

18.5

45.5

ETV 22-80N 400V/3Ph

PCR/ETV 22-80N/3

38.9

22.0

51.3

ETV 4-100 400V/3Ph

PCR/ETV 4-100/3

8.35

4.0

100

9.8

ETV 5.5-100 400V/3Ph

PCR/ETV 5.5-100/3

11.1

5.5

100

ETV 7.5-100 400V/3Ph

PCR/ETV 7.5-100/3

14.8

7.5

100

14.7

ETV 9-100 400V/3Ph

PCR/ETV 9-100/3

9.0

100

16.1

ETV 11-150 400V/3Ph

PCR/ETV 11-150/3

21.4

11.0

150

12.9

105

ETV 15-150 400V/3Ph

PCR/ETV 15-150/3

28.5

15.0

150

15.5

111

ETV 18.5-150 400V/3Ph PCR/ETV 18.5-150/3

18.0

150

121

ETV 22-150 400V/3Ph

150

129

PCR/ETV 22-150/3

DELIVERY STATUS

Please note: 150 Series new and improved hydraulic design with increased flow rates

ttpumps.com 76

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Agricultural & Environmental PTE RANGE

The PTE vertical chopper pump is driven by an extended shaft with air-cooled motor and has a heavy duty, robust design making it suitable for professional use.

PERFORMANCE DATA

30 25 20

HEAD / m

The PTEM versions have a nozzle jet mixer. Both versions are equipped with a multi vane-impeller and double chopping system in suction.

FEATURES

15 10

– Cast iron & stainless steel construction – Double mechanical seal with oil bath – Heavy-duty double chopping system – Available with 2m to 5m shaft length

D C

0 0

100

110

CAPACITY / l/sec

BENEFITS

– Customer inspired design – Double mechanical seal – Fully repairable – Superior materials used SCAN TO SHOP ONLINE

PTE SERIES

ELECTRIC MOTOR DRIVEN

PUMP TYPE

PRODUCT CODE

CURVE

PTE 4-100 400V/3Ph

PCR/PTE 4-100/3

PTE 5.5-100 400V/3Ph

PCR/PTE 5.5-100/3

PTE 7.5-100 400V/3Ph

PCR/PTE 7.5-100/3

PTE 9-100 400V/3Ph

PCR/PTE 9-100/3

PTE 11-150 400V/3Ph

PCR/PTE 11-150/3

OUTPUT

DISCHARGE

PTEM SERIES

MAXIMUM

DEPTH OF TANK CAPACITY m l/sec

PUMP LENGTH

amp

inch

HEAD m

8.35

100

1.5 - 2

5.5

100

2 - 2.5

2.5

14.8

7.5

100

2.5 - 3

100

3 - 3.5

3.5

21.4

150

12.9

104

3.5 - 4

PTE 15-150 400V/3Ph

PCR/PTE 15-150/3

28.5

150

15.5

111

4 - 4.5

4.5

PTE 18.5-150 400V/3Ph

PCR/PTE 18.5-150/3

18.5

150

121

4.5 - 5

PTEM 4-100 400V/3Ph

PCR/PTME 4-100/3

8.35

100

1.5 - 2

PTEM 5.5-100 400V/3Ph

PCR/PTEM 5.5-100/3

5.5

100

2 - 2.5

2.5

PTEM 7.5-100 400V/3Ph

PCR/PTEM 7.5-100/3

14.8

7.5

100

2.5 - 3

PTEM 9-100 400V/3Ph

PCR/PTEM 9-100/3

100

3 - 3.5

3.5

PTEM 11-150 400V/3Ph

PCR/PTEM 11-150/3

21.4

150

12.9

104

3.5 - 4

PTEM 15-150 400V/3Ph

PCR/PTEM 15-150/3

28.5

150

15.5

111

4 - 4.5

4.5

PTEM 18.5-150 400V/3Ph PCR/PTEM 18.5-150/3

18.5

150

121

4.5 - 5

DELIVERY STATUS

Please note: 150 Series new and improved hydraulic design with increased flow rates

Please note: Additional information required / bespoke built item, contact us for more information

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 77

AGRICULTURAL - 5

Chopper Pumps

Agricultural & Environmental PTH RANGE

The PTH range of high pressure centrifugal chopper pumps is ideal for particularly heavy-duty applications. These pumps have an overgear that is driven via a PTO shaft, multi-channel impellers and a double chopping system. These pumps are recommended for applications that require a substantial head and adequate chopping of the solids present in the liquid being pumped, ideal for systems with self-propelled sprinklers or marked height differences and long pipelines.

PERFORMANCE DATA

160 150 125 100 80 70 HEAD / m

AGRICULTURAL - 5

Chopper Pumps

50 40

FEATURES

– Cast iron construction – Single mechanical seal in oil bath – Heavy duty double chopping system – TTE impeller design

20 10

F 8.3

16.6

33.3

66.6

83.3

100

116.6

133.3

CAPACITY / l/sec

BENEFITS

– Good reliability – Fully repairable – Quality engineered – Strong robust design – Superior performance

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

SUCTION / DISCHARGE

MAXIMUM

inch

HEAD m

CAPACITY l/sec

PTH 65

PCR/PTH65

150 x 65

6x2½

125

PTH 80N

PCR/PTH80N

100 x 80

4x3

43.3

PTH 100

PCR/PTH100

150 x 100

6x4

88.3

PTH 100K-TTE

PCR/PTH100K-TTE

150 x 100

6x4

138

95.8

PTH 100KK-TTE

PCR/PTH100KK-TTE

150 x 100

6x4

155

95.8

PTH 150

PCR/PTH150

200 x 150

8x6

130

ttpumps.com 78

CURVE

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

Agricultural & Environmental PTO / PTD RANGE

The PTO / PTD range of horizontal centrifugal chopper pumps is ideal for particularly heavy-duty applications.

PERFORMANCE DATA

200 150

The PTO series is a pedestal mounted chopper pump that can be coupled via a flexible coupling to a diesel engine or electric motor.

HEAD / m

100 80

The PTD and PTO range can be coupled via flexible coupling to the flywheel of an engine. Both versions are equipped with a multi-vane impeller and double chopping system in the suction inlet.

60 50 40 30 20

PTO

8.3

16.6

2.5

33.3

66.6

83.3

CAPACITY / l/sec

These pumps are recommended for systems with self-propelled sprinklers, marked height differences and long pipelines.

PERFORMANCE DATA

160 150 125

FEATURES

– Cast iron construction – Single mechanical seal with oil bath – Heavy-duty chopping system – Adaptable design

100

HEAD / m

80 70

BENEFITS

50 40

– Good reliability – Fully repairable – Quality engineered – Strong robust design – Superior performance

30 20

PTD

G 8.3

16.6

33.3

66.6

83.3

100

116.6

133.3

CAPACITY / l/sec

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

PCR/PTO100K/3

PTD 65 PTD 80N

PTO 100K

SUCTION/DISCHARGE

MAXIMUM

inch

HEAD m

CAPACITY l/sec

150 x 100

6x4

50 – 115

45 - 75

PCR/PTD65

150 x 65

6x2½

125

PCR/PTD80N

100 x 80

4x3

PTD 100

PCR/PTD100

150 x 100

6x4

88.3

PTD 100K-TTE

PCR/PTD100K

150 x 100

6x4

138

95.8

PTD 100KK-TTE

PCR/PTD100KK

150 x 100

6x4

155

95.8

PTD 150

PCR/PTD150

200 x 150

8x6

125

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 79

AGRICULTURAL - 5

Chopper Pumps

SM SEPARATOR

The SM Separator range is designed for solid liquid separation of farm slurry, featuring a double threaded Archimedean screw and wedgewire screen that can reduce moisture content of sludges up to 40%. All internal components are made from treated AISI 316 stainless steel for longevity.

FEATURES

– Heavy-duty construction – Cast iron & stainless steel construction – Up to 33rpm – Screen sizes from 0.25 - 1mm – Basic & professional versions available – High dry matter versions available – 1 Ph mini available – Mini dry matter available

BENEFITS

– Designed for long life – Easy to use – Fully repairable – Great performance – Trouble free

PUMP TYPE

SEPARATOR ROTATION (rpm)

OUTPUT kW

SCREEN MESH mm

CAPACITY m3/h

WEIGHT kg

SM260 MINI

3.0

0.25, 0.5, 0.75, 1

4.5 – 18

290.0

SM260 BASIC

4.0

0.25, 0.5, 0.75, 1

4 – 50

390.0

SM260 PROFESSIONAL

4.0

0.25, 0.5, 0.75, 1

4 – 50

440.0

SM300 PROFESSIONAL

5.5

0.25, 0.5, 0.75, 1

6 – 72

515.0

SM260 DM

5.5

0.5, 0.75, 1

6 – 22

470.0

SM260 FA DM

7.5

0.5, 0.75, 1

5 – 32

500.0

HIGH DRY MATTER

AGRICULTURAL - 5

Agricultural & Environmental

DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: Additional information required / bespoke built item, contact us for more information

MSU MOBILE SEPARATOR

Solution for farm contractor or farmers for shared management of manure. Ideal for livestock, biogas and food industry applications.

FEATURES

– Mobile separation unit is a plug-and-play product that can be easily transported, positioned and operated in a short time. – Comprising of Cri-Man standard machines making it a flexible system: it is possible to assemble the unit with different sizes of separators and pumps. – The long pivoting conveyor allows you to load the solid fraction in a wide working area. – Two chopper pumps (for separator feeding and liquid fraction). – Overflow circuit on the separator. – Easily transportable, completely mounted on a compact frame.

BENEFITS

– Designed for long life – Easy to use – Fully repairable – Great performance PUMP TYPE

SEPARATOR

ENGINES IMPLEMENTED SEPARATOR kW

SEPARATOR’S SUPPLY CHOPPER ELECTRO-PUMP kW

RELAUNCH CHOPPER ELECTRO-PUMP kW

ADJUSTABLE CONVEYOR BELT kW

PRIMING ELECTRO-PUMP kW

2.2

0.75

MSU 260 BASIC

SM260 BASIC

MSU 260 PRO

SM260 PROFESSIONAL

2.2

0.75

MSU 260 DM

SM260 DM

5.5

2.2

0.75

MSU 260 FA DM

SM260 FA DM

7.5

5.5

2.2

0.75

MSU 300 PRO

SM300 PROFESSIONAL

5.5

2.2

0.75

ttpumps.com 80

SCAN TO SHOP ONLINE

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

PLD PISTON PUMP

The PLD is a positive displacement piston pump designed for high density liquids. The PLD pump is an ideal match for the biogas and food process sectors. Supplied with an automatic valve system that permits alternating loading and unloading of the pistons.

BENEFITS

FEATURES

– Designed for long life – Fully repairable – Great solids handling capacity – Robust design – Wear resistant

– Hydraulic motor power 5.5 kW – Capacity 10 - 30m3/h – Head 80m – Pistons stroke 900mm – Suitable for liquids with up to 27% total solids – Available with heat exchange unit PUMP TYPE

PLD

PRODUCT CODE

DISCHARGE mm inch

PCR/PLD5.5

200

HEAD m

MAXIMUM CAPACITY l/sec

TOTAL SOLIDS %

WEIGHT kg

600

8.3

AGRICULTURAL - 5

Agricultural & Environmental

DELIVERY STATUS SCAN TO SHOP ONLINE

MXL MIXER RANGE

A lateral mixer powered by electric three phase motor with planetary gearbox. Constructed in stainless steel with an oil immersed transmission shaft. The MXL range can also be supplied in various lengths and installation angles to provide tailored mixing for your application, available with ATEX approved electric motors. Particularly suited to work in combination with the TBM range of mixers for storage tanks exceeding 30 meters in diameter.

FEATURES

BENEFITS

– Patented self-supporting shaft – Designed for long life – Lateral external mounted motor – Fully repairable – Planetary gearbox for increased torque – Robust design – Axial thrust 2158 - 3826N – Capacity 3286 - 6702m3/h – Max length of propeller shaft 5.5m – Propeller in stainless steel with self-cleaning profile – Maximum working temperature 60°C – ATEX rated version available TYPE

SEPARATOR ROTATION (rpm)

OUTPUT amp

CAPACITY m3/h

MXL 11/4/1.5

351

21.4

3977

MXL 11/4/3

351

21.4

3977

MXL 11/4/4.5

351

21.4

3977

MXL 11/4/5.5

351

21.4

3977

MXL 15/4/1.5

351

28.5

5335

MXL 15/4/3

351

28.5

5335

MXL 15/4/4.5

351

28.5

5335

MXL 15/4/5.5

351

28.5

5335

MXL 18.5/4/1.5

354

34.5

18.5

6884

MXL 18.5/4/3

354

34.5

18.5

6884

MXL 18.5/4/4.5

354

34.5

18.5

6884

MXL 18.5/4/5.5

354

34.5

18.5

6884

DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: Additional information required / bespoke built item, contact us for more information

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 81

AGRICULTURAL - 5

Agricultural & Environmental HBC BIOCELL

TECHNICAL FEATURES SEPARATOR

The HBC Biocell transforms slurry into comfortable and hygienic pasteurised bedding. It guarantees consistent quality and sanitisation of bedding produced from recycled separated solids, even under the most unfavourable conditions, permitting the substitution of traditional bedding materials.

LEVEL GAUGE FUME EXTRACTION FAN

FEATURES

– Economic production of bedding – Daily efficient operation – Consistent quality – Easy to use – PLC control – Improved, more economic management of slurry – No additional storage requirements – ST/ST construction stainless steel – Monitors process temperature

TEMPERATURE SENSOR

BENEFITS

MATERIAL EXTRACTION SCREW CONVEYOR

– Fully repairable with long life – Quality engineered – Minimal running costs – Great investment

AIR INSUFFLATION FAN

SCAN TO SHOP ONLINE

LOADING CELLS

MIXER GEAR UNIT

LIVESTOCK MANURE MANAGEMENT

STORAGE TANK

5 MANURE

OVERFLOW

SOLID FRACTION

LIQUID FRACTION

4 SOLID FOR BEDDING

HOSE REEL

PUMP TYPE

MATERIAL OUTPUT tonnes

OUTPUT kW

WEIGHT kg

HBC 250

5.5

2500

HBC 500

5.5

2500

HBC 1000

6.5

4000

HBC 2500

10.5

6000

DELIVERY STATUS

Please note: Additional information required / bespoke built item, contact us for more information

ttpumps.com 82

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

MANDALS HOSE

T-T are the sole UK distributor for Mandals’ world class range of layflat hoses. We offer hoses specially designed for use with slurry umbilical and irrigation systems. Mandals’ hoses are resistant to most industrial and agricultural chemicals, ozone damage and UV rays, offering the very highest abrasion resistance and tensile strength. FLEXITEX - A reinforced fluid transfer hose for agricultural systems, predominantly used as a feed hose from farm to field. ULTRAMAN (STANDARD PU) - A multi purpose transfer hose which is suitable as a feeder hose or even a drag hose in smaller umbilical systems.

FLEXITEX

ULTRAMAN

DRAGMAN (HEAVY DUTY PU) - This hose is specially designed to withstand extreme tensile stress, pulling forces and abrasion from umbilical slurry systems.

FEATURES

– Pre-twisted yarn for anti-rolling and anti-kink properties – Extruded through the weave design – High grade TPU (Ultraman & Dragman) – High abrasion resistance on all TPU hoses – Rubber hose designed to swell and return to original size without degradation

BENEFITS

– Lightweight – Robust design – Wear resistant

Same day dispatch.

SCAN TO VIEW THE FULL RANGE

Lead time may apply.

DRAGMAN

ttpumps.com

+44 (0) 1630 647200 83

AGRICULTURAL - 5

Agricultural & Environmental

AGRICULTURAL - 5

Agricultural & Environmental MXT RANGE

A tractor mounted mixer for below ground slurry lagoons, featuring a fully galvanised construction. The MXT range is fitted with a twin blade propeller with a self-cleaning profile and requires as little as 50hp to operate.

FEATURES

– Heavy-duty construction – Mild steel galvanised construction – Up to 33 RPM

BENEFITS

– Fully repairable – Great performance – Flexible use

MODEL

TRACTOR RATED POWER

LENGTH m

PROPELLER DIAMETER mm

CAPACITY m3/h

WEIGHT kg

MXT 6/55

7.71

600

4680

480

MXT 6/75

7.71

720

7815

500

MXT 6/90

7.71

770

9460

520

DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: Additional information required / bespoke built item, contact us for more information

CFS SHREDDER RANGE

The CFS range is designed to shred solid materials suspended in substrate before entering into a digester. It can be supplied with a suction or pressure pump or operate under head without a pump, ideal for shredding long fibres and objects of medium to large dimensions. The system comprises two series of opposing hardened steel blades with specially designed profiles for shredding solid materials suspended in fluids. A gearbox integrated into the body of the shredder generates different rotation speeds between the two blade support shafts, optimising the process.

FEATURES

– Various blade materials available for different application types – Epicyclic gearbox providing higher torque – Dual gearbox design allows both sets of blades to rotate at different speeds – Same footprint across the four different versions

BENEFITS

– Designed for long life – Fully repairable – Quality engineered – Wear resistant MODEL

MOTOR RATING kW

MOTOR SIZE

MOTOR RPM n

FLANGES DNa x DNm

BLADE n

MAX PRESSURE bar

CAPACITY m3/h

MAX TROUPE Nm

CFS 11/ 4

160

1450

200 x 200 PN10

116

905

1234

CFS 15 / 4

160

1450

200 x 200 PN10

116

CFS 18.5 / 4

18.5

180

1450

200 x 200 PN10

193

915

CFS 22 / 4

180

1450

200 x 200 PN10

193

1087

ttpumps.com 84

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

Agricultural & Environmental

AGRICULTURAL - 5

COMPACTORS, SCREENING & EXTRACTORS Multiple solutions for optimal management of mechanical wastewater pre-treatments required for processing settleable solids before discharging the wastewater. PROCESS AVAILABLE: SCREENING – Screw Screens or Rotary Drums – Mesh size of 0.25mm to 10mm – Capacity up to 1000m³/h COMPACTION – For transportation, de-watering and compressing solids (reducing volume) – Capacity up to 8m³/h – Horizontal or Vertical outlets SHAFTLESS SCREW CONVEYING – Lengths up to 50mtr – Screws up to 700mm diameter – Capacity up to 150m³/h GRIT HANDLING – For removal of settled solids by a low speed conveying screw – Capacity up to 600m³/h – Shaftless Screw SEPTIC TANK RECEIVING – Solids received, screened, lifted, washed & compacted – Capacity up to 100m³/h – Single or continuous bagging unit COMBINED PRE-TREATMENT – Solids screening and compaction / sand & grit removal – Liquid throughput up to 36 l/sec – Volume reduction of the screenings up to 40%

APPLICATIONS

– Abattoirs – Food processing – Brewery / Vineyards – Pulp & paper – Municipal

BENEFITS

– Fully repairable – Great performance – Quality build – Superior materials used – Wear resistant SCAN TO VIEW ONLINE

Please note: Additional information required / bespoke built item, contact us for more information

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 85

Notes

ttpumps.com 86

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Potable / Cleanwater Pumps

SECTION 06 POTABLE / CLEANWATER PUMPS

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 87

KF RANGE

The KF range is an economical transfer pump for domestic and industrial use. Ideal for clear water without abrasive particles or chemically aggressive substances. Featuring a cast iron body, brass peripheral impeller and stainless steel shaft fitted with a carbon-ceramic mechanical seal.

PERFORMANCE DATA

90 80 70

The peripheral impellers have several radial paddles on their extremities, giving more energy to the pumped liquid. The special shaping of the paddles gives the fluid a fast radial recycling motion between the paddles of the impeller and the pump body.

60 HEAD / m

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

50 40 30 D

This characteristic enables the fluid pressure to increase progressively from the inlet to the outlet, obtaining a regular and not pulsating flow.

10 0

FEATURES

0.16

0.33

0.5

0.66

0.83

1.8

1.37

CAPACITY / l/sec

– Cast iron construction – Brass impeller – Mechanical seal in carbon/ceramic – Liquid temperature up to 70°C – IP44 motor

BENEFITS

– Built for reliability – Efficient design – Fully repairable – Superior materials used SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

KFO 230V

PST/KF0/1

KFO 400V

PST/KF0/3

KF3 230V

PST/KF3/1

KF3 400V

PST/KF3/3

INLET x OUTLET

MAXIMUM

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

2.3

0.37

25 x 25

1x1

0.7

5.5

0.37

25 x 25

1x1

0.7

5.5

0.55

25 x 25

1x1

0.8

9.5

2.4

0.55

25 x 25

1x1

0.8

KF4 230V

PST/KF4/1

6.8

0.75

25 x 25

1x1

0.8

KF4 400V

PST/KF4/3

2.8

0.75

25 x 25

1x1

0.8

10.5

KF5 230V

PST/KF5/1

1.1

25 x 25

1x1

1.2

KF5 400V

PST/KF5/3

3.5

1.1

25 x 25

1x1

1.2

KF6 230V

PST/KF6/1

11.5

1.5

25 x 25

1x1

1.2

KF6 400V

PST/KF6/3

6.4

1.5

25 x 25

1x1

1.2

ttpumps.com 88

OUTPUT

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

CM / CMP RANGE

FEATURES

– Cast iron construction – CMP, CMP76 and CMP79 have a Noryl impeller, CM1, CM1B and CM1C have a brass impeller – Mechanical seal – Liquid temperature up to 70°C – IP44 motor

PERFORMANCE DATA

60 50 40 HEAD / m

The CM/CMP range is a single stage centrifugal pump for clear water without abrasive particles or chemically aggressive substances, featuring a cast iron pump body, Noryl impeller and stainless steel shaft fitted with ceramic-graphite-NBR mechanical seal. This range possesses a hydrodynamic closed impeller design allowing it to achieve its pressure and flow with minimal loss of efficiency.

30 C B

A 10 0

0.16 0.33

0.5 0.66 0.83

1.16 1.33

1.5 1.66 1.83

2.16 2.33

CAPACITY / l/sec

BENEFITS

– Built for reliability – Efficient design – Fully repairable – Superior materials used SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

CMP 230V

PST/CMP/1

CMP 400V

PST/CMP/3

CMP76 230V CMP76 400V CMP79 230V

PST/CMP79/1

CMP79 400V

PST/CMP79/3

CM1 230V

PST/CM1/1

CM1 400V

PST/CM1/3

OUTPUT

INLET x OUTLET

MAXIMUM

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

0.37

25 x 25

1x1

1.3

8.5

1.4

0.37

25 x 25

1x1

1.3

8.5

PST/CMP76/1

4.5

0.55

25 x 25

1x1

1.7

PST/CMP76/3

1.8

0.55

25 x 25

1x1

1.7

11.5

0.75

25 x 25

1x1

1.7

2.7

0.75

25 x 25

1x1

1.7

12.5

1.1

25 x 25

1x1

21.5

3.5

1.1

25 x 25

1x1

23.5

CM1B 230V

PST/CM1B/1

10.6

1.5

25 x 25

1x1

CM1B 400V

PST/CM1B/3

4.8

1.5

25 x 25

1x1

24.5

CM1C 230V

PST/CM1C/1

13.7

2.2

25 x 25

1x1

2.2

CM1C 400V

PST/CM1C/3

5.6

2.2

25 x 25

1x1

2.2

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 89

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

FC RANGE

The FC range is a centrifugal pump for the drainage of clear water without abrasive particles or chemically aggressive substances, featuring a cast iron pump body and brass impeller, with a stainless steel shaft fitted with ceramic-graphite-NBR mechanical seal.

PERFORMANCE DATA

100 80

FEATURES

HEAD / m

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

– Cast iron construction – Brass impeller – Mechanical seal – Liquid temperature up to 70°C – IP44 motor

60 K 40 D 20

BENEFITS

– Built for reliability – Efficient design – Fully repairable – Superior materials used

F E

A 0

0.66

1.33

2.6

3.3

4.6

5.3

CAPACITY / l/sec

SCAN TO SHOP ONLINE

PUMP TYPE

FC20-2B 230V

PRODUCT CODE

CURVE

PST/FC202B/1

INLET x OUTLET

MAXIMUM

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

4.2

0.55

25 x 25

1x1

1.4

FC20-2B 400V

PST/FC202B/3

1.9

0.55

25 x 25

1x1

1.4

17.5

FC20-2A 230V

PST/FC202A/1

6.4

0.75

25 x 25

1x1

1.4

17.5

FC20-2A 400V

PST/FC202A/3

2.8

0.75

25 x 25

1x1

1.4

FC25-2D 230V

PST/FC252D/1

9.5

1.1

32 x 25

1¼ x 1

1.9

25.5

FC25-2D 400V

PST/FC252D/3

3.5

1.1

32 x 25

1¼ x 1

1.9

FC25-2F 230V

PST/FC252F/1

9.8

1.1

32 x 25

1¼ x 1

1.9

25.5

FC25-2F 400V

PST/FC252F/3

4.2

1.1

32 x 25

1¼ x 1

1.9

FC25-2C 230V

PST/FC252C/1

1.5

32 x 25

1¼ x 1

52.5

2.2

29.5

FC25-2C 400V

PST/FC252C/3

1.5

32 x 25

1¼ x 1

52.5

2.2

FC25-2E 230V

PST/FC252E/1

1.5

32 x 25

1¼ x 1

61.5

2.2

FC25-2E 400V

PST/FC252E/3

5.3

1.5

32 x 25

1¼ x 1

61.5

2.2

29.5

FC25-2B 400V

PST/FC252B/3

5.8

2.2

32 x 25

1¼ x 1

2.5

FC25-2A 400V

PST/FC252A/3

32 x 25

1¼x1

2.8

FC30-2C 400V

PST/FC302C/3

9.3

40 x 32

1 ½ x 1¼

3.9

FC30-2D 400V

PST/FC302D/3

9.3

40 x 32

1 ½ x 1¼

4.4

FC30-2B 400V

PST/FC302B/3

5.5

40 x 32

1 ½ x 1¼

4.4

FC30-2A 400V

PST/FC302A/3

13.4

7.5

40 x 32

1½ x 1¼

ttpumps.com 90

OUTPUT

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

M RANGE

The M range is a single stage centrifugal pump for clear water without abrasive particles or chemically aggressive substances, featuring a cast iron pump body, Noryl impeller and stainless steel shaft fitted with ceramic-graphite-NBR mechanical seal. This range possesses a hydrodynamic closed impeller design, allowing it to achieve its pressure and flow with minimal loss of efficiency.

80 70 60

FEATURES

– Cast iron construction – Noryl impeller – Mechanical seal – Liquid temperature up to 70°C – IP44 motor

PERFORMANCE DATA

HEAD / m

50 E

M50 - M200

D B

– Built for reliability – Efficient design – Fully repairable – Superior materials used

30 20

BENEFITS

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

I H

M 0

0.3

0.6

0.8

1.3

L J

1.6

2.3

2.6

CAPACITY / l/sec

M300 - M500 PUMP TYPE

PRODUCT CODE

CURVE

OUTPUT

INLET x OUTLET

MAXIMUM

amp

inch

HEAD m

CAPACITY l/sec

WEIGHT kg

M50 230V

PST/M50/1

2.4

0.37

25 x 25

1x1

0.8

9.5

M50 400V

PST/M50/3

1.1

0.37

25 x 25

1x1

0.8

10.5

M60 230V

PST/M60/1

3.5

0.37

25 x 25

1x1

0.8

M60 400V

PST/M60/3

1.6

0.37

25 x 25

1x1

0.8

M70 230V

PST/M70/1

3.9

0.55

25 x 25

1x1

0.7

M70 400V

PST/M70/3

1.9

0.55

25 x 25

1x1

0.7

M80 230V

PST/M80/1

5.7

0.75

25 x 25

1x1

0.8

17.5

M80 400V

PST/M80/3

2.7

0.75

25 x 25

1x1

0.8

18.5

M150 230V

PST/M150/1

9.5

1.1

40 x 25

1½ x 1

1.1

M150 400V

PST/M150/3

3.5

1.1

40 x 25

1½ x 1

1.1

M200 230V

PST/M200/1

11.7

1.5

40 x 25

1½ x 1

1.7

M200 400V

PST/M200/3

5.2

1.5

40 x 25

1½ x 1

1.7

M300 C 230V

PST/M300C/1

9.1

1.1

40 x 32

1½ x 1 ¼

1.9

M300 C 400V

PST/M300C/3

3.8

1.1

40 x 32

1½ x 1¼

1.9

M300 B 230V

PST/M300B/1

1.5

40 x 32

1½ x 1¼

1.9

M300 B 400V

PST/M300B/3

1.5

40 x 32

1½ x 1¼

1.9

M300 A 230V

PST/M300A/1

14.8

2.2

40 x 32

1 ½ x 1¼

1.9

M300 A 400V

PST/M300A/3

2.2

40 x 32

1½ x 1¼

1.9

M400 C 230V

PST/M400C/1

9.1

1.1

40 x 32

1½ x 1¼

2.7

M400 C 400V

PST/M400C/3

3.8

1.1

40 x 32

1½ x 1¼

2.7

M400 B 230V

PST/M400B/1

1.5

40 x 32

1½ x 1¼

2.8

M400 B 400V

PST/M400B/3

1.5

40 x 32

1½ x 1¼

2.8

M400 A 230V

PST/M400A/1

14.8

2.2

40 x 32

1½ x 1¼

2.8

M400 A 400V

PST/M400A/3

2.2

40 x 32

1½ x 1¼

2.8

M500 230V

PST/M500/1

14.5

2.2

40 x 32

1½x 1¼

1.0

M500 400V

PST/M500/3

2.2

40 x 32

1½ x 1¼

1.0

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 91

M STAINLESS STEEL RANGE

The M Stainless Steel range is an economical, industrial, selfpriming pump, ideal for domestic use. It permits the transfer / boosting of clear water without abrasive particles or chemically aggressive substances.

60 50 40

HEAD / m

This series features a stainless steel outer casing, thermoplastic resin impeller and stainless steel shaft fitted with a ceramicgraphite-NBR mechanical seal.

FEATURES

30 20

– Stainless steel construction – Thermoplastic resin impeller, stainless steel impeller optional – Self-priming – Mechanical seal – Max temperature of liquid 50°C – IP44 motor PUMP TYPE

PERFORMANCE DATA

10 0

0.16

0.33

0.5

0.66

0.33

1.16

CAPACITY / l/sec

PRODUCT CODE

CURVE

M94 230V

PST/M94/1

M94 400V

PST/M94/3

M97 230V M97 400V M99 230V M99 400V

OUTPUT

INLET x OUTLET

MAXIMUM

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

3.6

0.37

25 x 25

1x1

0.8

8.5

1.6

0.37

25 x 25

1x1

0.8

PST/M97/1

4.1

0.55

25 x 25

1x1

0.9

PST/M97/3

1.9

0.55

25 x 25

1x1

0.9

9.5

PST/M99/1

5.2

0.75

25 x 25

1x1

10.5

PST/M99/3

2.5

0.75

25 x 25

1x1

11.5

OP RANGE

DELIVERY STATUS

SCAN TO SHOP ONLINE

PERFORMANCE DATA

A range of horizontal, multi-stage, stainless-steel centrifugal pumps suitable for pumping clean water and non-aggressive chemical liquids. The OP range is suitable for automatic water distribution in domestic applications or, thanks to its high head, can be used as a pilot pump for pressurisation units.

FEATURES

160 140 120

HEAD / m

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

– Stainless steel construction – Models from 0.55kW - 18.5kW – Max temperature of liquid 90°C – Max operation pressure: 13 bar

100 80 60

E 40

B C

D 0

1.8 2.2

3.8

6.6

11.1

30.5

CAPACITY / sec

PUMP TYPE

CURVE

INLET x OUTLET

MAXIMUM

inch

HEAD m

CAPACITY l/sec

OP 32/R

0.55 - 2.2

32 x25

1 1/4 x 1

100

1.8

OP 32

0.55 - 2.2

32 x 25

1 1/4 x 1

101

2.2

OP 40/R

0.75 - 2.2

40 x 40

1½ x 1½

73.5

3.1

OP 40

0.75 - 2.2

40 x 40

1½ x 1½

64.5

3.9

OP 50

3.0 - 7.5

50 x 50

2x2

129

6.7

OP 65

4.0 - 11

65 x 65

2½ x 2½

162

11.1

OP 100

5.5 - 18.5

100 x 80

4x3

127.5

30.6

ttpumps.com 92

MOTOR RANGE

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

SWIMMING POOL PUMPS

Our self-priming pool pumps are designed for efficient and long-term water recirculation and filtering, built with chemically resistant construction materials that ensure reliable pumping in domestic, commercial and industrial installations. With the choice of one or three phase motors that cover a wide range of flow rates and an optional bronze impeller, our pool pumps are a versatile filtering solution.

FEATURES

– Maximum water handling temperature of 40ºC – Large pre-filter protects pump from debris and reduces need for sieve cleaning – Polypropylene housing and 316 stainless steel shaft for chemical corrosion resistance – Mechanical seal in 316 stainless steel – IP55 rated motor for protection against dust and water jets – Greased motor bearings for longevity and silent operation – Transparent filter lid for easy inspection of interior sieve – Completely sealed motor to prevent any electrical contact with water – Includes a key for easy opening of pre-filter lid (KPW only) – Turbine available in Noryl or marine grade bronze (KSC & KSM only) – External ventilation on motor (KSC & KSM only) PUMP TYPE

MAXIMUM HEAD m

CAPACITY l/sec

KPW

KPO MOTOR kW

WEIGHT kg

KPO 25 1ph/3ph

2.7

0.16

8.5 - 9.8

KPO 33 1ph/3ph

3.3

0.25

8.5 - 9.8

KPO 50 1ph/3ph

3.8

0.37

8.5 - 9.8

KPO 75 1ph/3ph

4.4

0.55

9.8 - 9.9

KPO 100 1ph/3ph

0.7

9.8 - 9.9

KPW 50 1ph/3ph

4.8

0.37

11.7

KPW 75 1ph/3ph

5.4

0.55

11.5 - 11.9

KPW 100 1ph/3ph

6.4

0.75

12.9 - 13.1

KPW 150 1ph/3ph

7.5

1.1

13.9 - 15.5

KPW 200 1ph/3ph

7.7

1.5

14.9 - 17.1

KPW 300 1ph/3ph

8.8

2.2

17.4 - 21

KSM-4 300 3ph

17.2

2.2

42.5

KSM-4 400 3ph

20.5

44.5

KSM-4 550 3ph

34.1

53.4

KSM-4 750 3ph

39.7

5.5

KSM-4 1000 3ph

44.4

7.5

KSM-2 1250 3ph

46.3

9.2

84.5

KSM-2 1500 3ph

52.2

85.5

KSC-4 300 3ph

17.2

2.2

37.5

KSC-4 400 3ph

20.5

39.5

KSC-4 550 3ph

34.1

48.5

KSC-4 750 3ph

39.7

5.5

KSC-4 1000 3ph

44.4

7.5

KSC-2 1250 3ph

46.3

9.2

79.5

KSC-2 1500 3ph

52.2

80.5

Same day dispatch.

Lead time may apply.

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 93

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps HX RANGE

The HX range of electric multi-stage pumps feature a compact design for easy installation into industrial applications, manufactured with stainless steel for reliable transferral of clear water, edible oils and light chemicals. The HX range is available with motors up to 4.4kW that provide flow and pressure rates to suit a variety of pumping needs.

FEATURES

– Motor available up to 4.4kW – Maximum head of 60m – Maximum operating temperature of 70ºC – Maximum flow rate of 7.78 l/sec – Stainless steel construction for corrosion resistance – Cartridge mechanical seal for easy seal maintenance without motor removal – IP55 protection rated motor – Horizontal installation PUMP TYPE

HX1-20

PRODUCT CODE

MOTOR kW

PN/HX1-20

WEIGHT kg

inch

HEAD m

CAPACITY l/sec

0.25

25 x 25

1x1

0.67

HX1-30

PN/HX1-30

0.37

25 x 25

1x1

25.5

0.67

HX1-40

PN/HX1-40

0.37

25 x 25

1x1

34.8

0.67

HX1-50

PN/HX1-50

0.45

25 x 25

1x1

0.67

HX1-60

PN/HX1-60

0.45

25 x 25

1x1

HX2-20

PN/HX2-20

0.37

32 x 25

1 1/4 x 1

0.97

HX2-30

PN/HX2-30

0.37

32 x 25

1 1/4 x 1

0.97

HX2-40

PN/HX2-40

0.55

32 x 25

1 /4 x 1

0.97

HX2-50

PN/HX2-50

0.55

32 x 25

1 /4 x 1

45.5

HX2-60

PN/HX2-60

0.75

32 x 25

1 1/4 x 1

53.5

0.97

HX4-20

PN/HX4-20

0.37

32 x 25

1 /4 x 1

1.94

HX4-30

PN/HX4-30

0.55

32 x 25

1 1/4 x 1

1.94

HX4-40

PN/HX4-40

0.75

32 x 25

1 /4 x 1

37.5

1.94

HX4-50

PN/HX4-50

1.1

32 x 25

1 1/4 x 1

1.94

HX4-60

PN/HX4-60

1.1

32 x 25

1 /4 x 1

1.94

HX8-10

PN/HX8-10

0.75

38 x 32

1 ½ x 1 1/4

3.05

HX8-20

PN/HX8-20

0.75

38 x 32

1 ½ x 1 1/4

3.05

HX8-30

PN/HX8-30

1.1

38 x 32

1 ½ x 1 1/4

29.5

3.05

HX8-40

PN/HX8-40

1.5

38 x 32

1 ½ x 1 /4

3.05

HX8-50

PN/HX8-50

2.2

38 x 32

1 ½ x 1 1/4

3.05

HX12-10

PN/HX12-10

0.75

38 x 38

1½ x 1½

11.5

4.44

HX12-20

PN/HX12-20

1.2

38 x 38

1½ x 1½

4.44

HX12-30

PN/HX12-30

1.8

38 x 38

1½ x 1½

4.44

HX12-40

PN/HX12-40

2.4

38 x 38

1½ x 1½

4.44

HX12-50

PN/HX12-50

38 x 38

1½ x 1½

4.44

HX16-10

PN/HX16-10

1.1

51 x 51

2x2

12.8

6.11

17.5

HX16-20

PN/HX16-20

2.2

51 x 51

2x2

6.11

HX16-30

PN/HX16-30

51 x 51

2x2

6.11

HX16-40

PN/HX16-40

51 x 51

2x2

53.5

HX20-10

PN/HX20-10

1.1

51 x 51

2x2

13.5

7.78

17.5

HX20-20

PN/HX20-20

2.2

51 x 51

2x2

7.78

HX20-30

PN/HX20-30

51 x 51

2x2

39.5

7.78

HX20-40

PN/HX20-40

4.4

51 x 51

2x2

7.78

ttpumps.com 94

MAXIMUM

INLET x OUTLET mm

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

SWB RANGE

The SWB is a stainless steel, horizontal, single stage clean water pump for transferring and boosting clean water with no abrasive particles.

This pump is designed to pump clean, non-flammable and nonexplosive liquid that contains no solid granules or fibres. HEAD / m

FEATURES

– 304 stainless steel construction – Max temperature of liquid 80°C – Screwed connections – High efficiency motor – 0.75 - 1.1kW motor – 1 1/4“ inlet x 1” outlet – Compact pump design, float neck ring structure and improved mechanical efficiency and volume efficiency PUMP TYPE SWB 6-18 230V SWB 6-18 400V SWB 6-25 230V SWB 6-25 400V

PERFORMANCE DATA

20 15

B A

10 5 0

0.41

0.83

1.25

1.6

2.5

2.9

PRODUCT CODE

CURVE

PN/SWB6-18/230V PN/SWB6-18/400V PN/SWB6-25/230V PN/SWB6-25/400V

A\ A\ B\ B\

OUTPUT amp

4.45 1.64 6.42 2.48

0.75 0.75 1.1 1.1

FLOW RANGE l/sec

SPEED r/min

2.7 2.7 3.3 3.3

2900 2900 2900 2900

DELIVERY STATUS

SCAN TO SHOP ONLINE

The MX range of single stage centrifugal pumps are designed for efficient clean water transfer and pressurisation across industrial and agricultural applications. The MX’s compact design, lightweight but durable materials and threaded connections make it easy to install and access for future maintenance. – Motor available up to 1.1W – Maximum head of 40m – Maximum operating temperature of 85ºC – Maximum flow rate of 2.67 l/sec – Enclosed and fan-cooled motor – Compact and lightweight design – Threaded inlet and outlet connections for rapid installation – Durable 304 stainless steel construction, 316 stainless steel available on request PRODUCT CODE

MOTOR kW

MX 60/0.37

PN/MX 60/0.37

MX 60/0.55

PN/MX 60/0.55

MX 60/0.75

PN/MX 60/0.75

MX 100/0.55

PN/MX 100/0.55 PN/MX 100/1.1

Same day dispatch.

PERFORMANCE DATA

25 HEAD / m

FEATURES

MX 100/1.1

3.3

Q / l/sec

MX RANGE

PUMP TYPE

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

A 20

B C

1.6

3.3

6.6

Q / l/sec

MAXIMUM

INLET x OUTLET

WEIGHT kg

inch

HEAD m

CAPACITY l/sec

0.37

32 x 25

1 1/4 x 1

17.7

1.33

0.55

32 x 25

1 /4 x 1

22.7

1.33

0.75

32 x 25

1 1/4 x 1

28.2

1.33

0.55

32 x 25

1 1/4 x 1

17.8

2.33

1.1

32 x 25

1 /4 x 1

27.4

2.67

Lead time may apply.

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 95

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps MXO / MXC RANGE

The MXO / MXC range of horizontal, single-stage pumps are constructed in 304 stainless steel to maximise their operational durability. With a choice of open and semi-open impellers, these pumps are suitable across industrial, agricultural and domestic settings for water supply and drainage.

FEATURES

– Motor available up to 3kW – Maximum head of 22m – Maximum operating temperature of 90ºC – Maximum flow rate of 16 l/sec – Open and semi-open impellers available – Compact and lightweight design – IP55 protection-rated motor – Horizontal installation – 304 stainless steel construction – 230V or 400V 50Hz available

APPLICATIONS MXO – Domestic and industrial water supply – Domestic and industrial water drainage – Washing and surface cleaning MXC – HVAC systems – Water pressurisation SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

MOTOR kW

PN/MXO 20/1.1

MXO 25/1.5 MXO 35/2.2

WEIGHT kg

CAPACITY l/sec

1.1

9.2

8.3

PN/MXO 25/1.5

1.5

12.5

9.7

PN/MXO 35/2.2

2.2

15.1

13.8

MXO 20/1.1

MXO 40/3

PN/MXO 40/3

16.6

PN/MXC 15/1.1

1.1

15.2

5.5

MXC 15/1.5

PN/MXC 15/1.5

1.5

19.5

5.5

MXC 25/1.5

PN/MXC 25/1.5

1.5

13.8

11.1

MXC 25/2.2

PN/MXC 25/2.2

2.2

18.4

11.1

MXC 25/3

PN/MXC 25/3

22.4

11.1

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

MXC 15/1.1

ttpumps.com 96

MAXIMUM HEAD m

Lead time may apply.

HQX RANGE

The HQX is a versatile range of self-priming pumps that can mix ultra-fine air bubbles (20-30 µm) by simultaneously intaking lowviscosity liquid and gas, pressurising and mixing the two. The HQX’s 304 stainless steel construction and maximum operating temperature of 120°C make them suitable for a variety of applications.

FEATURES

– Motor available up to 7.5kW – Maximum head of 70m – Maximum operating temperature of 120ºC – Maximum flow rate of 5 l/sec – 304 stainless steel construction for corrosion resistance – HQX/L designed for clear and low-viscosity liquid, HQXB/L series available for explosive/flammable liquid (e.g. fuels) – Gas-liquid ratio 1:9 – Horizontal inlet, vertical outlet – High efficiency, low noise pollution SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

MOTOR kW

20HQX-1

PN/20HQX-1

20HQXB-1*

MAXIMUM

INLET x OUTLET

CAPACITY l/sec

WEIGHT kg

inch

HEAD m

0.55

44 x 38

1 3/4 x 1 ½

0.78

PN/20HQXB-1

0.55

44 x 38

1 3/4 x 1 ½

0.78

25HQX-2

PN/25HQX-2

1.1

25 x 44

1 x 1 3/4

0.97

5HQXB-2*

PN/25HQXB-2

1.1

25 x 44

1 x 1 3/4

0.97

40HQX-6

PN/40HQX-6

38 x 32

1 ½ x 1 1/4

2.22

40HQXB-6*

PN/40HQXB-6

38 x 32

1 ½ x 1 /4

2.22

50HQX-12

PN/50HQX-12

5.5

51 x 38

2x1½

50HQXB-12*

PN/50HQXB-12

7.5

51 x 38

2x1½

DELIVERY STATUS

Please note: *ATEX approved explosion proof models.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 97

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps NSX RANGE

The NSX range of horizontal, single stage pumps are designed to provide high-performance pumping – compliant with European Standard EN733, fitted with 304 stainless steel components as standard and with carbon mechanical seals for maximum reliability.

FEATURES

– Motor available up to 37W – Maximum head of 70m – Maximum operating temperature of 100ºC – Maximum flow rate of 55.5 l/sec – Silicon carbide or carbon mechanical seals for high-pressure capability and corrosion resistance – Horizontal installation – 304 stainless steel construction available for increased corrosion resistance SCAN TO SHOP ONLINE

PUMP TYPE

NSX 50-32-160/1.1 NSX 50-32-160/1.5 NSX 50-32-160/2.2 NSX 50-32-200/3 NSX 50-32-200/4 NSX 50-32-200/5.5 NSX 65-40-125/1.5 NSX 65-40-125/2.2 NSX 65-40-125/3 NSX 65-40-160/4 NSX 65-40-200/5.5 NSX 65-40-200/7.5 NSX 65-40-200/11 NSX 65-50-125/3 NSX 65-50-125/4 NSX 65-50-160/5.5 NSX 65-50-200/7.5 NSX, 65-50-200/9.2 NSX 65-50-200/11 NSX 65-50-200/15 NSX 65-50-200/18.5 NSX 80-65-125/5.5 NSX 80-65-125/7.5 NSX 80-65-125/9.2 NSX 80-65-160/11 NSX 80-65-160/15 NSX 80-65-200/18.5 NSX 80-65-200/22 NSX 80-65-200/30 NSX 100-80-160/11 NSX 100-80-160/15 NSX 100-80-160/18.5 NSX 100-80-200/22 NSX 100-80-200/30 NSX 100-80-200/37

PRODUCT CODE PN/NSX 50-32-160/1.1 PN/NSX 50-32-160/1.5 PN/NSX 50-32-160/2.2 PN/NSX 50-32-200/3 PN/NSX 50-32-200/4 PN/NSX 50-32-200/5.5 PN/NSX 65-40-125/1.5 PN/NSX 65-40-125/2.2 PN/NSX 65-40-125/3 PN/NSX 65-40-160/4 PN/NSX 65-40-200/5.5 PN/NSX 65-40-200/7.5 PN/NSX 65-40-200/11 PN/NSX 65-50-125/3 PN/NSX 65-50-125/4 PN/NSX 65-50-160/5.5 PN/NSX 65-50-200/7.5 PN/NSX, 65-50-200/9.2 PN/NSX 65-50-200/11 PN/NSX 65-50-200/15 PN/NSX 65-50-200/18.5 PN/NSX 80-65-125/5.5 PN/NSX 80-65-125/7.5 PN/NSX 80-65-125/9.2 PN/NSX 80-65-160/11 PN/NSX 80-65-160/15 PN/NSX 80-65-200/18.5 PN/NSX 80-65-200/22 PN/NSX 80-65-200/30 PN/NSX 100-80-160/11 PN/NSX 100-80-160/15 PN/NSX 100-80-160/18.5 PN/NSX 100-80-200/22 PN/NSX 100-80-200/30 PN/NSX 100-80-200/37

ttpumps.com 98

INLET x OUTLET

MAXIMUM HEAD m

CAPACITY l/sec

inch

18.7 22.5 28 34.9 45.7 58.5 15.5 20 25.7 30 37.4 48 64 18 24.2 31.6 36.3 43.5 51.5 59.7 70.2 19.3 24.5 28.1 33.9 41.8 51 57.7 70.2 23.8 32.3 36.2 43.5 55.4 64.1

3.4 5 5 5.5 5.5 5.5 8.3 9.7 9.7 9.7 11.1 11.1 11.1 16.6 16.6 16.6 16.6 16.6 16.6 19.4 19.4 33.3 33.3 36.1 36.1 36.1 36.1 36.1 36.1 53.3 55.5 55.5 55.5 55.5 55.5

50 x 32 50 x 32 50 x 32 50 x 32 50 x 32 50 x 32 65 x 40 65 x 40 65 x 40 65 x 40 65 x 40 65 x 40 65 x 40 65 x 40 65 x 50 65 x 50 65 x 50 65 x 50 65 x 50 65 x 50 65 x 50 80 x 65 80 x 65 80 x 65 80 x 65 80 x 65 80 x 65 80 x 65 80 x 65 100 x 80 100 x 80 100 x 80 100 x 80 100 x 80 100 x 80

2 x 1 1/4 2 x 1 1/4 2 x 1 1/4 2 x 1 1/4 2 x 1 1/4 2 x 1 1/4 2½x1½ 2½x1½ 2½x1½ 2½x1½ 2½x1½ 2½x1½ 2½x1½ 2½x1½ 2½x2 2½x2 2½x2 2½x2 2½x2 2½x2 2½x2 3x2½ 3x2½ 3x2½ 3x2½ 3x2½ 3x2½ 3x2½ 3x2½ 4x3 4x3 4x3 4x3 4x3 4x3

+44 (0) 1630 647200

Same day dispatch.

MOTOR

WEIGHT kg

1.1 1.5 2.2 3 4 5.5 1.5 2.2 3 4 5.5 7.5 11 3 4 5.5 7.5 9.2 11 15 18.5 5.5 7.5 9.2 11 15 18.5 22 30 11 15 18.5 22 30 37

31 37 39 53 58 77 33 35 47 52 78 82 161 49 54 78 82 85 161 171 188 79 83 87 163 173 190 220 292 163 173 185 223 295 315

DELIVERY STATUS

Lead time may apply.

VX RANGE

The VX range of electric multi-stage pumps are designed for the high-pressure transferral of clear and non-abrasive liquids - with motors available up to 110kW, the VX range provides a pumping solution for a wide range of flow requirements. The diverse VX’s 304 stainless steel construction means these pumps can reliably handle corrosive liquids, making them suitable for use in industrial, agricultural, civil and commercial applications.

FEATURES

– Motor available up to 110kW – Maximum head of 305m – Maximum operating temperature of 120ºC – Maximum flow rate of 66 l/sec – Stainless steel construction for chemical resistance – Cartridge mechanical seal for easy seal maintenance without motor removal – Energy-efficient motor – Vertical installation

SCAN TO SHOP ONLINE

PUMP TYPE

MAXIMUM CAPACITY l/sec

DIN FLANGE

WEIGHT kg

HEAD m

MAXIMUM OPERATION PRESSURE

MOTOR kW

VX1

0.6

DN25

19 - 48

6 - 237

25 bar

0.37 - 2.2

VX3

1.2

DN25

20 - 55

9.5 - 235

25 bar

0.37 - 3

VX5

2.3

DN32

21 - 84

7.5 - 249

25 bar

0.55 - 5.5

VX10

3.8

DN40

30 - 168

9.5 - 250

25 bar

0.75 - 11

VX15

6.6

DN50

41 - 177

13.5 - 250

25 bar

2.2 - 15

VX20

8.1

DN50

41 - 205

14.5 - 244

24 bar

2.2 - 18.5

VX32

11.1

DN65

64 - 350

8 - 292

29 bar

2.2 - 30

VX45

15.2

DN80

83 - 438

16 - 305

30 bar

4 - 45

VX65

22.2

DN100

93 - 424

8 - 215

21 bar

4 - 45

VX90

30.5

DN100

105 - 407

6 - 168

16 bar

5.5 - 45

VX125

41.6

DN125

230 - 715

15 - 162.5

16 bar

11 - 75

VX150

DN125

230 - 700

8.5 - 157

15 bar

11 - 75

VX210

66.6

DN150

311 - 1180

15.5 - 157.5

15 bar

18.5 - 110

DELIVERY STATUS

COUNTER FLANGE KITS DIN FLANGE

PUMP TYPE

PRODUCT CODE

DN25

VX1 / VX3

PNS/CF-DN25

DN32

VX5

PNS/CF-DN32

DN40

VX10

PNS/CF-DN40

DN50

VX15 / VX20

PNS/CF-DN50

DN65

VX32

PNS/CF-DN65

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 99

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

MK RANGE

The MK range are multi-stage, close-coupled vertical electric pumps that are suitable for pressurisation, irrigation systems and other applications where high pressure is required.

PERFORMANCE DATA

400 360 320 280

FEATURES

– Cast iron and stainless steel construction – Liquid temperature: -15°C up to 90°C (120°C on request) – Bidirectional mechanical seal

HEAD / m

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

240 200 160 120 80

BENEFITS

– Designed for reliability and long life – Robust design

0.55

1.11

1.16

2.2

2.7

4.16

5.5

11.1

20.8

30.5

Q / l/sec

TYPE

CURVE

MOTOR RANGE kW

MAX PRESSURE bar

DIN FLANGE

MK32

0.75 – 5.5

23.5

DN32

MK40

1.5 – 9.2

23.5

DN40

MK50

3.0 – 15.0

26.3

DN50

MK65

5.5 – 30.0

39.4

DN65

MK100

5.5 – 55.0

DN100

DELIVERY STATUS

SCAN TO SHOP ONLINE

CHARACTERISTICS 1. Thrust bearing included in the pump: MK series is equipped with a bearing necessary for supporting the axial thrust generated by the pump. This improves pump life and allows to couple to the pump, the standard normalized motors without turning to normalized motor equipped with axial bearing. 2. Normalized mechanical seal: mechanical seals are according to UNI EN 12756 rules. This allows an easy availability in case of need. 3. Shafts supported and guided by bushings in wear proof material 4. Double wear ring: diffusers equipped with double wear ring in self-lubricating material 5. Wide range: 11 families for power up to 55kW available with different shapes, metallurgies and motors 6. Version with frequency converter (up to 15kW) 7. Pumps and motors made in Italy. 8. Pumps and motors to Directive 2009/125/CE (ErP).

ttpumps.com 100

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

IR RANGE

The IR range is ideal for recirculation, air conditioning, water supply and pressurisation systems. The design offers the highest performance in terms of output and efficiency. This pump is a close-coupled end-suction electric pump.

FEATURES

– Cast iron and stainless steel construction – Available in stainless steel, bronze and super duplex stainless steel – Bidirectional mechanical seal – Can be positioned horizontally or vertically – Selected models available with integral inverter

BENEFITS

– Designed for reliability and long life – Easy to use – Popular product – Robust design – Superior materials used

IRX

130 120 110 100 90 80 70 60 50 40 30 20 10 0 1.1

IRXD IR-M

PERFORMANCE DATA

50 40 G HEAD / m

HEAD / m

SCAN TO SHOP ONLINE

30 20 H

10 A 2.2

5.5

8.3

B 15

D 33

F 0

0.83

1.66

2.7

Q / l/sec

1450RPM 4 POLE

2900RPM 2 POLE

TYPE

I 11

J 39

L 97

123

Q /l/sec

CURVE

MOTOR RANGE kW

IR32

IR40

IR50

2.2 – 55

IR65

3.0 – 45

MAX PRESSURE bar

INLET

OUTLET

0.75 – 17

9.8

DN50

DN32

1.5 – 45

12.9

DN65

DN40

DN65

DN50

9.55

DN80

DN65

IR80

5.5 – 75

10.2

DN100

DN80

IR4P32

0.37 – 3

2.35

DN50

DN32

IR4P40

0.37 – 9.2

4.1

DN65

DN40

IR4P50

0.55 – 11

4.1

DN65

DN50

IR4P65

0.75 – 30

6.5

DN80

DN65

IR4P80

2.2 – 45

6.3

DN100

DN80

IR4P100

5.5 – 75

6.4

DN125

DN100

IR4P125

11.0 – 75

5.9

DN150

DN125

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 101

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

NCB/Z RANGE

The NCB/Z is a bare shaft end-suction centrifugal pump, also available with a long coupled electric motor and base plate. The motor unit and the rotating part of the pump can be taken away without removing the pump body from the system piping. This pump is suitable for recirculating plants, heating, air conditioning, water supply and pressurisation systems.

FEATURES

– Cast iron and stainless steel construction – Liquid temperature: -15°C up to 120°C – IE3 high efficiency motors – Also available in stainless steel, bronze and superduplex stainless steel

BENEFITS

NCB/ZM PUMP WITH MOTOR, COUPLING & BASE PLATE

– Designed for reliability and long life – Easy to use – Popular product – Robust design – Superior materials used

130 120 110 100 90 80 70 60 50 40 30 20 10 0 1.1

NCB BARESHAFT PUMP PERFORMANCE DATA

PERFORMANCE DATA

70 60 J 50 HEAD / m

HEAD / m

SCAN TO SHOP ONLINE

40 H 30 20

10 2.2

17 18

111

0.83 1.7

2.7

6.9

I 11

28 39

2900 RPM 2 POLE

Q / l/sec

1450 RPM 4 POLE

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

102

111

139

188

Q / l/sec

TYPE

CURVE

MOTOR RANGE kW

MAX PRESSURE bar

INLET

OUTLET

NCBZ32

0.75 – 22.0

9.8

DN50

DN32

NCBZ40

1.5 – 45.0

12.9

DN65

DN40

NCBZ50

2.2 – 55.0

12.5

DN65

DN50

NCBZ65

3.0 – 45.0

9.5

DN80

DN65

NCBZ80

5.5 – 90

10.2

DN100

DN80

NCBZ100

22.0 – 90.0

9.7

DN125

DN100

NCBZ4P32

0.37 – 3.0

2.38

DN50

DN32

NCBZ4P40

0.37 – 9.2

4.1

DN65

DN40

NCBZ4P50

0.55 – 11.0

4.1

DN65

DN50

NCBZ4P65

0.75 – 30.0

6.5

DN80

DN65

NCBZ4P80

2.2 – 45.0

6.3

DN100

DN80

NCBZ4P100

5.5 – 75.0

6.48

DN125

DN100

NCBZ4P125

11.0 – 75.0

5.9

DN150

DN125

NCBZ4P150

18.5 – 90.0

6.2

DN200

DN150

ttpumps.com

56 75

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

NCBK/Z RANGE

The NCBK/Z is a bare shaft end-suction centrifugal pump, also available with a long coupled electric motor and base plate. The motor unit and the rotating part of the pump can be taken away without removing the pump body from the system piping. This pump is suitable for recirculating plants, heating, air conditioning, water supply and pressurisation.

FEATURES

– Cast iron and stainless steel construction – Liquid temperature: -15°C up to 120°C – IE3 high efficiency motors – Also available in stainless steel, bronze and super duplex stainless steel – Discharge sizes from DN150 - DN300

BENEFITS

– Designed for reliability and long life – Easy to use – Popular product – Robust design – Superior materials used

NCBK/Z PUMP WITH MOTOR, COUPLING & BASE PLATE

NCBK BARESHAFT PUMP

SCAN TO SHOP ONLINE

PERFORMANCE DATA 100 90

HEAD / m

80 70

60 50

D C

40 30 20

10 0

111.1

222.2

E 333.3

444.4

555.5

666.6

CAPACITY / l/sec

TYPE

CURVE

MOTOR RANGE kW

MAX HEAD m

INLET

OUTLET

NCBK/Z 150 - 500

110 - 200

94.5

DN200

DN150

NCBK/Z 200 - 315

37 - 55

DN250

DN200

NCBK/Z 200 - 400

90 - 160

63.5

DN250

DN200

NCBK/Z 200 - 500

200 - 315

DN250

DN200

NCBK/Z 250 - 315

55 - 110

37.5

DN300

DN250

NCBK/Z 250 - 400

200 - 315

62.8

DN300

DN250

NCBK/Z 250 - 500

250 - 400

96.7

DN300

DN250

NCBK/Z 300 - 400

200 - 315

57.9

DN350

DN300

NCBK/Z 300 - 500

250 - 355

89.9

DN350

DN300

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 103

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

SKD/Z RANGE

This axial split case pump with double suction impeller is suitable for recircling plants, heating, air conditioning, heat recovery, fire fighting systems, irrigation and process plants. The double volute design has many benefits, including low vibration and no shaft flexion. The hydraulic design allows high efficiency and low NPSH with its cast iron construction and stainless steel shaft making the pump durable with a long life span.

FEATURES

SKD/Z PUMP WITH MOTOR, COUPLING & BASE PLATE

BENEFITS

– Designed for reliability and long life – Easy to maintain and repair – Energy efficient – Robust design SCAN TO SHOP ONLINE

SKD BARESHAFT PUMP

750 RPM

1000 RPM

PERFORMANCE DATA

HEAD / m

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

SKD 500-550B

277.7

555.5

833.3

1111.1

SKD 500-550A

111.1

222.2

333.3

444.4

CAPACITY / l/sec

TYPE

CURVE

666.6

777.7

888.8

1000

1111.1

CAPACITY / l/sec

MOTOR RANGE kW

RPM

MAX HEAD m

INLET

OUTLET

SKD 500-550B

110 - 250

750

22.2

DN600

DN500

SKD 500- 550A

200 - 450

1000

DN600

DN500

ttpumps.com 104

555.5

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

SKD/Z RANGE

1450 RPM PERFORMANCE DATA 2900 RPM

320

PERFORMANCE DATA

300 280

180

260 240

160

220

140

180

160 HEAD / m

HEAD / m

200 N

140 120 E J A C

20 0

300

SKD 125-170

60 40

80 40

SKD 125-335

100 60

100

120

100

200

300

400

500

600

700

800

CAPACITY / m /h 3

600

900

1200

1500

1800

2100

2400

CAPACITY / m /h 3

TYPE

CURVE

MOTOR RANGE kW

RPM

MAX HEAD m

INLET

OUTLET

SKD/Z 80 - 355

15 - 30

1450

45.1

DN150

DN80

SKD/Z 125 - 270

11 - 22

1450

DN200

DN125

SKD/Z 125 - 335

18.5 - 37

1450

DN200

DN125

SKD/Z 150 - 400

37 - 90

1450

DN200

DN150

SKD/Z 150 - 500

110 - 200

1450

105

DN200

DN150

SKD/Z 200 - 315

45 - 75

1450

DN300

DN200

SKD/Z 200 - 400

90 - 160

1450

DN250

DN200

SKD/Z 200 - 630

200 - 400

1450

135

DN250

DN200

SKD/Z 250 - 400

110 - 250

1450

DN350

DN250

SKD/Z 250 - 450

160 - 250

1450

DN300

DN250

SKD/Z 250 - 560

250 - 450

1450

120

DN300

DN250

SKD/Z 250 - 630

355 - 500

1450

145

DN300

DN250

SKD/Z 250 - 630/2

900 - 1200

1450

318

DN300

DN250

SKD/Z 250 - 750

630 - 710

1450

180

DN300

DN250

SKD/Z 250 - 750/2

800 - 1000

1450

218

DN300

DN250

SKD/Z 300 - 500

355 - 450

1450

DN400

DN300

TYPE

CURVE

MOTOR RANGE kW

RPM

MAX HEAD m

INLET

OUTLET

SKD 125 - 270

11 - 22

2900

DN200

DN125

SKD 125 - 335

18.5 - 37

2900

DN200

DN125

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 105

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps TM / TMB / TMV RANGE The TM, TMB and TMV are a comprehensive range of horizontal pumps that offer a variety of models – providing a pumping solution to applications with different power type, flow rate, solids handling and corrosion resistance demands. These multistage pumps are designed for applications that require high pressure and resistance to wear, covering industrial, agricultural, commercial and civil installations.

FEATURES

– Available as a bare shaft pump or coupled with a diesel or electric motor – TM models feature axial impellers, TMB/V models feature radial impellers – Pump stages between 2 – 13 – Stainless steel, duplex, super duplex, cast iron and bronze components available – Optional reinforcement including cast iron stage bodies, stainless steel shaft and PN63 nozzles

APPLICATIONS

– HVAC systems – Irrigation – Washing systems – Artificial snow – Lifting plants

SCAN TO SHOP ONLINE

TM DIESEL

PUMP TYPE

TM / TMB / TMV

MAXIMUM amp

MAXIMUM OPERATION PRESSURE bar

642

236

TMBX

ttpumps.com 106

MAXIMUM TEMPERATURE

MOTOR

120°C

710

DELIVERY STATUS

TMZX

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

L RANGE

B TWIN HEAD UNITS COMING SOON!

Centrifugal electric pumps with an in-line inlet and outlet for hot and cold water circulation. The L range is suitable for installation in civil and industrial plants for heating, cooling, hot water, sanitary purposes, pressurising and other civil and industrial applications.

FEATURES

– Cast iron and stainless steel construction – Liquid temperature: -15°C up to 140°C – Maximum operation pressure: 16 bar – Selected models available with integral inverter for variable speed operation

BENEFITS

– Designed for reliability and long life – Easy to use – Popular product – Robust design – Superior materials used SCAN TO SHOP ONLINE

110 100 90 80 70 60 50 40 30 20 10 A 0 0.13

L-4P PERFORMANCE DATA

60 50

C D

HEAD / m

L-2P PERFORMANCE DATA

30 20 A

0.55 1.1

1.4

2.2

5.5

8.3 12.5 16 18

L-2P RANGE (2900RPM) L-4P RANGE (1450RPM)

C 0.55

1.38

4.16

5.5

CAPACITY / l/sec

7.7

222

Q / l/sec

TYPE

CURVE

MAX PRESSURE bar

MAX Q l/sec

MOTOR RANGE kW

INLET

OUTLET

L-2P 25

1.1

3.1

0.18 – 0.37

DN25

G1 ½

L-2P 32

9.6

8.3

0.18 – 15.0

DN32

L-2P 40

10.2

12.5

0.55 – 18.5

DN40

L-2P 50

9.9

0.55 – 22.0

DN50

L-2P 65

9.3

29.2

0.75 – 37.0

DN65

L-2P 80

6.35

43.1

2.2 – 37.0

DN80

L-2P 100

6.05

58.3

2.2 – 45.0

DN100

L-4P 32

2.35

7.8

0.25 – 2.2

DN32

L-4P 40

2.55

8.1

0.37 – 2.2

DN40

L-4P 50

2.6

11.1

0.37 – 3.0

DN50

L-4P 65

2.5

0.55 – 7.5

DN65

L-4P 80

4.0

44.4

1.5 – 18.5

DN80

L-4P 100

3.9

72.2

3.0 – 30.0

DN100

L-4P 150

5.9

222.2

30 - 92

DN150

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 107

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

Potable / Cleanwater Pumps AUTOSMART RANGE

The Hidro Domestic AutoSmart range of booster sets are comprised of a stainless steel booster pump connected to a 24 litre pressure vessel. The pumps start/stop operation is regulated by a Smart 10 electronic pressure switch. They have been designed for cold water boosting, increasing water pressure where existing incoming pressure is not sufficient. The Hidro Domestic AutoSmart range is a simple plug and play, but robust solution, you can rely on.

FEATURES

– Plug & play design – Automatic start/stop – Dry run protection – Adjustable pressure setting – Up to 5 bar & flow of 2.66 l/sec – Booster pump constructed in stainless steel – Tank holds 24 litres with EPDM membrane (WRAS) – Non-return valve on discharge – Max. Operating temperature 40°C

BENEFITS

– British design and manufacture – Designed for long life – Easy to maintain and repair – Energy efficient – Great performance – High efficiency – Superior materials used

SCAN TO SHOP ONLINE

PERFORMANCE DATA 60 50 40 HEAD / m

POTABLE / CLEANWATER - 6

Booster Set

30 (C) M99

(D) M700 B

(B) M97 (A) M94

10 0 0

0.16

0.33

0.5

0.66

0.83

1.16

1.33

1.55

1.66

1.83

2.16

2.33

2.5

2.66

2.83

CAPACITY / l/sec

PUMP TYPE

PRODUCT CODE

CURVE

AUTOSMART- TT JET X M94 with painted steel tank 230V/1Ph

TTP/AUTOSMART-M94

AUTOSMART - TT JET X M97 with painted steel tank 230V/1Ph

OUTPUT

INLET x OUTLET

amp

inch

WEIGHT kg (PUMP ONLY)

3.6

0.37

25 x 25

1x1

8.5

TTP/AUTOSMART-M97

4.1

0.55

25 x 25

1x1

AUTOSMART - TT JET X M97 with painted steel tank 230V/1Ph

TTP/AUTOSMART-M99

5.2

0.75

25 x 25

1x1

AUTOSMART - TT M700 B with painted steel tank 230V/1Ph

TTP/AUTOSMARTM700

12.0

1.5

40 x 32

1½ x 1¼

27.5

DELIVERY STATUS

Please note: 400V/3Ph available on request.

ttpumps.com 108

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Potable / Cleanwater Pumps CAT 5 Booster Set

The Hidro Boost Cat 5 Booster Set is a complete package pumping system designed and built in the UK, featuring an insulated tank and Type AB air gap to protect against back flow. The set includes a Smart Pressure Control as standard, providing low level/dry run protection for reliable operation (for a free standing tank with 100 litre nominal capacity). With stainless steel pipes and fittings, a WRAS approved centrifugal pump and a variety of motor sizes available, the Hidro Boost Cat 5 provides a versatile off the shelf pumping solution.

FEATURES

– Cat 5 back flow-protection AB air gap – 100-litre working capacity insulated tank - larger available on request – SMART 10 Controller – WRAS approved pump & components – IP55 rated – Low-level protection – Dry run protection – Stainless steel suction valve and strainer – Stainless steel pipe and fittings

SCAN TO SHOP ONLINE

MOTOR kW

MODEL

ELECTRIC PUMP

Q = DELIVERY

220 - 240V

380 - 415V

L/min O

20.0

28.0

36.0

44.0

52.0

60.0

70.0

m³/h 0

1.2

1.7

2.2

2.6

3.1

3.6

4.2

0.50

TTP/03-35FM

2.90

34.8

31.2

29.3

27.0

24.3

21.2

17.9

13.4

0.50

TTP/04-45FM

3.34

45.5

40.3

37.5

34.2

30.3

26.2

21.8

15.9

0.75

TTP/05-60FM

4.56

58.4

52.5

49.4

45.5

40.9

35.5

30.3

22.8

0.95

TTP/06-70FM

5.29

70.2

63.0

59.2

54.4

48.9

42.8

36.2

27.2

0.40

TTP/03-35FT

1.35

34.9

31.3

29.3

26.9

24.2

21.1

17.8

13.4

0.50

TTP/04-45FT

1.55

45.8

40.6

37.8

34.5

30.7

26.7

22.3

16.3

0.75

TTP/05-60FT

1.71

60.2

55.1

52.3

48.7

44.2

39.2

33.7

26.2

1.1

TTP/06-70FT

2.17

72.7

66.8

63.6

59.3

54.1

48.1

41.5

32.5

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 109

POTABLE / CLEANWATER - 6

Booster Set

Potable / Cleanwater Pumps POTABLE / CLEANWATER - 6

Booster Set

B A comprehensive range of fixed and variable speed clean water booster sets, designed and manufactured to provide both the required flow and water pressure for your application. The Hidro Boost is designed for transferring and pressurising in hot and cold water systems, maintaining and regulating constant water pressure throughout your application. The set is controlled via either mechanical pressure switches for fixed speed applications, or the ‘Vasco’ variable speed control drive to maintain a constant pressure level during varying flow rate demand. The Hidro boost range can be manufactured in compliance with common specifications.

DA (DUTY ASSIST) / DAS (DUTY ASSIST STANDBY)

– Power: from 0.37 - 110kW – Manifold: 2” / 50mm - 8” / 200mm – Delivery: up to 133.3 l/sec – Pressure: up to 31 bar – Water temperature: up to 120°C

DAA (DUTY ASSIST ASSIST) / DAAS (DUTY ASSIST ASSIST STANDBY) – Power: from 0.37 - 110kW – Manifold: 2” / 50mm - 8” / 200mm – Delivery: up to 200 l/sec – Pressure: up to 31 bar – Water temperature: up to 120°C

HIDRO BOOST WITH PUMP MOUNTED VSD

OPTIONS

– Variable speed control with ‘Vasco’ or other VSD units – Fixed speed – 230V or 400V – Jockey pump facilities

FEATURES

– Manufactured using the latest pump technology from the ‘CNP’ range of clean water pumps – Assembled using stainless steel suction and delivery manifolds – WRAS compliant components – Fixed and variable speed options are available for efficient operation – Header tanks are available on request – Quality assured clean water booster sets

HIDRO BOOST WITH MOUNTED CONTROL PANEL

BENEFITS

– British design and manufacture – Designed for long life – Easy to maintain and repair – Energy efficient – Great performance – High efficiency – Superior materials used

2 YEAR WARRANTY ON FULL SET*

SCAN TO SHOP ONLINE

Please note: *Based on full maintenance contract and T-T commissioning.

BESPOKE HIDRO BOOST

BESPOKE / LARGER SETS AVAILABLE, PLEASE SPEAK TO OUR SALES TEAM ON +44 (0) 1630 647200

ttpumps.com 110

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Potable / Cleanwater Pumps B A range of powerful washdown sets suitable for general washing where reliability and durability are a must. A full kit, comprising of a pump mounted on a stainless steel base, complete with autostart/stop, hose, fittings and fully adjustable nozzle.

FEATURES

BENEFITS

– Designed and manufactured in the UK – Designed for long life – Easy to maintain and repair – Easy to use – Popular product

T-T WASHDOWN

PUMP TYPE

T-T WASHDOWN HIGH PRESSURE

SCAN TO WATCH T-T WASHDOWN IN ACTION

SCAN TO SHOP ONLINE

PRODUCT CODE

OUTPUT Amps

FLOW l/min

HORSE MAX MAX POWER PRESSURE PRESSURE Bar MPa

MAX PRESSURE PSI

RPM

VOLTAGES

T-T WASHDOWN 1 T-T WASHDOWN 2 T-T WASHDOWN 3

TT/WASHDOWN1 TT/WASHDOWN2 TT/WASHDOWN3

9.1 9.1 14.6

1.1 1.1 2.2

40 60 90

1.5 1.5 3.0

3.9 4.6 6.4

0.39 0.46 0.64

57 67 93

2900 2900 2900

230V/1Ph/50Hz 230V/1Ph/50Hz 230V/1Ph/50Hz

T-T WASHDOWN 4

TT/WASHDOWN4HP

6.7

3.0

5.7

170

17.0

2466

1450

400V/3Ph/50Hz

BEFORE

Same day dispatch.

DELIVERY STATUS

AFTER

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 111

POTABLE / CLEANWATER - 6

Washdown

RC500 / RC900

The RC500 / RC900 multi-stage submersible pump is ideal for the transfer and pressurisation of clean water. The pump has a stainless steel construction and impeller with Noryl diffuser. Available with manual or automatic operation with adjustable float switch.

PERFORMANCE DATA

70 60 50 HEAD / m

FEATURES

– Noryl diffuser – Stainless steel construction & impeller – Installation into wells up to 50m deep – Liquid temperature up to 40ºC – Mechanical seal within oil bath – 0.25 - 0.9kW – RC500 230V/1Ph - Manual Only – RC900 230V/1Ph - Automatic – RC900 400V/3Ph - Manual Only

40 30 20

10 0

0.37

0.5

1.33

1.66

CAPACITY / l/sec

BENEFITS

– Great performance – Lightweight – Energy efficient – Quality build – Robust design

AUTO RC900

PUMP TYPE

PRODUCT CODE

CURVE

MANUAL RC500 OPERATION MODE

OUTPUT

DISCHARGE

amp

WEIGHT kg

inch

RC500 230V/1Ph

PM/RC500/1

Manual

2.6

0.25

RC900 230V/1Ph

PM/RC900/1

Automatic

6.3

0.9

1¼

RC900 400V/3Ph

PM/RC900/3

Manual

2.5

0.9

1¼

RC FLOATING SUCTION KIT

PMS/FSKIT1.5M

1¼

2.9

DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: RC floating kit contains strainer, non-return valve, float, suction hose (1.5m) and fittings (only suitable for RC900).

T-T WELL

The T-T Well is a cost-effective well pump for the transfer of clear water. This range is ideal for domestic and agricultural use with a max. sand presence of 0.3%. The pump has a stainless steel body and motor casing, Noryl impeller and stainless steel shaft fitted with a twin silicon carbide mechanical seal.

FEATURES

– Installation into wells up to 50m deep – Stainless steel construction & impeller – Noryl diffuser – Liquid temperature up to 40ºC – Mechanical seal within oil bath – 0.5 - 1.2kW

CURVE

T-T WELL 100G 230V/1Ph T-T WELL 125G 230V/1Ph T-T WELL 150G 230V/1Ph T-T WELL 175G 230V/1Ph T-T WELL 200G 230V/1Ph

PW/WELL100G PW/WELL125G PW/WELL150G PW/WELL175G PW/WELL200G

A\ B\ C\ D\ E\

C B

40 A

– Lightweight – Popular product – Energy efficient – Quality build – Robust design – Superior materials – Great performance

PRODUCT CODE

E D

BENEFITS

PUMP TYPE

PERFORMANCE DATA

100

HEAD / m

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

20 0

0.16

0.37

0.5

0.66

0.83

1.16

1.33

CAPACITY / l/sec

OUTPUT

DISCHARGE

amp

inch

3.4 4.4 5.4 6.5 7.4

0.5 0.6 0.8 1.0 1.2

32 32 32 32 32

1 1/4 1 1/4 1 1/4 1 1/4 1 1/4

DIAMETER mm

CABLE LENGTH m

WEIGHT kg

130 130 130 130 130

15 15 15 15 15

17 19 21 24 24

DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: Complete with float switch.

ttpumps.com 112

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Potable / Cleanwater Pumps Borehole Pumps

NS 95 / 96 – 4” RANGE

The NS range is suitable for lifting, pressurisation and distribution in civil and industrial applications, autoclave and cistern inlets, and washing plants and irrigation systems. This pump draws from wells with a minimum diameter of 104mm, tanks or natural basins. The pump is available with radial or semi-axial impellers and is constructed of components that have a high wear resistance.

FEATURES

– Plastic impeller – Heavy duty design – Stainless steel construction – High efficiency motor – Low maintenance - easy to service – Maximum liquid temp: 35ºC – Maximum working pressure: 34 bar – Maximum liquid depth: 300m

BENEFITS

– Designed for reliability and long life – Great performance – High efficiency – Quality engineered – Superior materials used SCAN TO SHOP ONLINE

TYPE

NS95-K NS95-A NS95-X NS95-B NS95-C NS95-DA NS95-E NS95-F NS96-A NS96-X NS96-B NS96-C NS96-DA NS96-E NS96-F

Same day dispatch.

DISCHARGE inch

1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 2 2 2 1 1/4 1 1/4 1 1/4 2 2 2 2

32 32 32 32 32 50 50 50 32 32 32 50 50 50 50

Lead time may apply.

MOTOR RANGE kW

MAXIMUM HEAD m

CAPACITY l/sec

316 314 241 279 214 228 177 115 355 271 294 268 237 177 115

0.55 0.88 1.38 1.75 2.21 3.05 5.55 6.95 0.83 1.38 1.67 2.23 3.33 5.55 6.95

0.37 - 2.2 0.37 - 3 0.37 - 2.2 0.37 - 4 0.37 - 4 0.75 - 5.5 1.1 - 7.5 1.1 - 7.5 0.37 - 3 0.37 - 3 0.37 - 4 0.55 - 4 0.75 - 5.5 1.1 - 7.5 1.1 - 7.5

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 113

Potable / Cleanwater Pumps POTABLE / CLEANWATER - 6

Borehole Pumps

FS 98 – 4” RANGE

The FS range uses axial sliding floating impellers which avoid blockages even with the presence of sand. This range draws from wells with a minimum diameter of 104mm, tanks or natural basins.

FEATURES

– Plastic impeller – Heavy duty design – Stainless steel construction – High efficiency motor – Liquid temperature up to 35ºC – Maximum working pressure: 39 bar – Maximum liquid depth: 300m

BENEFITS

– Designed for reliability and long life – Great performance – High efficiency – Quality engineered – Superior materials used

TYPE

FS98-A FS98-B FS98-C FS98-D FS98-E

inch

DISCHARGE mm

MOTOR RANGE kW

1 1/4 1 1/4 1 1/4 2 2

32 32 32 50 50

0.37 - 3 0.37 - 4 0.55 - 5.5 0.55 - 5.5 0.75 - 7.5

MAXIMUM HEAD m

CAPACITY l/sec

372 385 390 342 296

0.78 0.97 1.67 2.22 3.33

DELIVERY STATUS

SCAN TO SHOP ONLINE

S 151 / S 152 – 6” RANGE The S151/2 range of borehole pumps are designed for longterm, reliable installation in harsh environments such as offshore and mining applications. The S151/2 range boasts durable construction materials and can draw from wells with a minimum diameter of 158mm, tanks and natural basins.

FEATURES

– Maximum submersible depth: 300m – Maximum solids handling: 2mm – Heavy-duty, stainless steel construction – High-efficiency motor – Low maintenance - easy to service – Semi-axial, cast iron impeller – Vertical installation – Available in 316 stainless steel and marine grade bronze

TYPE

S151-A S151-B S151-C S151-K S152-X

ttpumps.com 114

DISCHARGE inch

MOTOR RANGE kW

3 3 3 3 3

76 76 76 76 76

4 - 37 4 - 37 5.5 - 37 3 - 18.5 3 - 30

+44 (0) 1630 647200

MAXIMUM HEAD m

CAPACITY l/sec

326 281 224 456 390

16.6 20 25 5 10.8

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

Potable / Cleanwater Pumps NR 151 / NR 152 – 6” RANGE

The NR range are constructed out of materials that are particularly durable and have a high wear resistance. The pump is suitable for lifting, pressurising and distributing clean water in civil and industrial installations. This range draws from wells with a minimum diameter of 156mm, tanks or natural basins.

FEATURES

– Plastic impeller as standard, other materials available on request – Heavy duty design – Stainless steel construction – High efficiency motor – Liquid temperature up to 35ºC – Maximum working pressure 38 bar – Maximum liquid depth: 300m

BENEFITS

– Designed for reliability and long life – Great performance – High efficiency – Quality engineered – Superior materials used

SCAN TO SHOP ONLINE

TYPE

NR151-A NR151-B NR151-C NR151-D NR151-E NR151-F NR152-A NR152-B NR152-C NR152-D NR152-E

Same day dispatch.

DISCHARGE inch

MOTOR RANGE kW

2½ 2½ 2½ 2½ 3 2½ 3 3 3 3 3

65 65 65 65 76 65 76 76 76 76 76

1.5 - 11 1.5 - 15 2.2 - 18.5 2.2 - 22 4 - 37 2.2 - 22 2.2 - 18.5 2.2 - 26 3 - 37 5.5 - 37 5.5 - 37

Lead time may apply.

MAXIMUM HEAD m

CAPACITY l/sec

340 355 330 290 383 345 480 540 410 363 366

3.89 5.56 7.22 9.44 13.33 9.44 5 7.22 12.5 15.56 17.78

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 115

POTABLE / CLEANWATER - 6

Borehole Pumps

Potable / Cleanwater Pumps POTABLE / CLEANWATER - 6

Borehole Pumps

S 181 – 8” RANGE

The S181 range borehole pump is suitable for lifting, pressurisation and distribution in civil and industrial applications, autoclave and cistern inlets, and washing plants and irrigation systems. This pump draws from wells with a minimum diameter of 210mm and is constructed with components that have a high wear resistance for reliability in harsh operating conditions.

FEATURES

– Maximum submersible depth: 300m – Low maintenance - easy to service – High-efficiency motor – Stainless steel construction – Cast iron impeller

TYPE

S181-A S181-B S181-C S181-D

DISCHARGE inch

MOTOR RANGE kW

5 5 5 5

127 127 127 127

5.5-67 7.5-92 7.5-92 9.2-92

MAXIMUM HEAD m

CAPACITY l/sec

351 360 324 252

27.7 40.2 44.4 63.3

DELIVERY STATUS

SCAN TO SHOP ONLINE

NR 201 - 8” RANGE

The NR201 range are 8” borehole pumps that provide high head rates and flow capacity as well as being able to work under extreme pressure - ideal for lifting and supplying water in industrial systems, irrigation and underground water extraction.

FEATURES

– Maximum submersible depth: 300m – Maximum solids handling: 5mm – Epoxy-coated, carbon steel shell – High-efficiency motor – Low maintenance - easy to service – Brass radial impellers – Vertical installation – Available in 316 stainless steel

TYPE

NR201-X NR201-A NR201-B NR201-C

ttpumps.com 116

DISCHARGE inch

MOTOR RANGE kW

3 3 3 3

76 76 76 76

4 - 67 5.5 - 67 9.2 - 92 11 - 92

+44 (0) 1630 647200

MAXIMUM HEAD m

CAPACITY l/sec

850 686 546 435

10 12.5 25 33.3

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

Potable / Cleanwater Pumps NR 250 - 10” RANGE

The NR250 10” electric borehole pump is designed for optimal water pressurising, distribution and underground extraction across civil and industrial applications. The NR250 can draw clear water from wells with a minimum diameter of 274mm, tanks and natural basins.

FEATURES

– Maximum submersible depth: 300m – Maximum solids handling: 3mm – Liquid operating temperature: 0°C - 30°C – Maximum operating pressure: 95 bar – Epoxy-coated, carbon steel shell – High-efficiency motor – Low maintenance - easy to service – Brass radial impellers – Vertical or horizontal installation

TYPE

NR250-A NR250-B NR250-C

DISCHARGE inch

MOTOR RANGE kW

5 5 5

127 127 127

30 - 185 37 - 185 37 - 185

MAXIMUM HEAD m

CAPACITY l/sec

955 593 451

27.7 44.4 58.3

POTABLE / CLEANWATER - 6

Borehole Pumps

DELIVERY STATUS

SCAN TO SHOP ONLINE

S 252 / S 253 – 10” RANGE

The S252/3 range of 10” electric borehole pumps feature durably made anti-wear components for maximum operating reliability in tough conditions. The S252/3 can draw clear water from wells with a minimum diameter of 264mm, tanks and natural basins.

FEATURES

– Maximum submersible depth: 300m – Maximum solids handling: 3mm – Epoxy-coated, carbon steel shell – High-efficiency motor – Low maintenance - easy to service – Cast iron diffuser protected by an anti-wear rubber ring – Cast iron semi-axial impeller – Vertical or horizontal installation – Available in 316 stainless steel and marine grade bronze

TYPE

S252-A S252-B S253-A XS252-B

Same day dispatch.

inch

DISCHARGE mm

MOTOR RANGE kW

6 6 6 6

150 150 150 150

30 -170 26 - 170 22 - 170 22 - 170

Lead time may apply.

MAXIMUM HEAD m

CAPACITY l/sec

288 240 388 236

77.7 111.1 61.1 105.5

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 117

Potable / Cleanwater Pumps POTABLE / CLEANWATER - 6

Borehole Pumps

S302 – 12” RANGE

S302 12” electric borehole pumps are designed to draw from wells with a minimum diameter of 310mm, tanks and natural basins. The high head rates and durable construction materials used make these submersible pumps ideal for the boosting and distribution of clearwater, salt water and groundwater.

FEATURES

– Maximum submersible depth: 300m – Maximum solids handling: 3mm – High-efficiency motor – Low maintenance - easy to service – Cast iron semi-axial impeller – Vertical installation – Available in 316 stainless steel or marine-grade bronze

TYPE

S302-A S302-B XS302-A XS302-B

DISCHARGE inch

MOTOR RANGE kW

8 8 8 8

203 203 203 203

37 - 300 37 - 300 37 - 300 37 - 300

MAXIMUM HEAD m

CAPACITY l/sec

384 312 384 312

145.8 159.7 125 138.8

DELIVERY STATUS

SCAN TO SHOP ONLINE

S350 – 14” RANGE

S350 is a submersible electric pump featuring semi-axial impellers. The S350 range of boreholes is available for both horizontal and vertical installation, with a range of construction material options for both the pump body and individual components - making this high pressure, high flow electric pump suitable for a range of applications.

FEATURES

– Semi-axial impellers – Motors available between 45kW - 300 kW – Capable of delivering head rates between 46.5 - 196m – Cast-iron, bronze and Duplex steel construction materials offering corrosion resistance for different applications

TYPE

S350-A S350-A1 S350-A2

ttpumps.com 118

inch

DISCHARGE mm

MOTOR RANGE kW

10 10 10

254 254 254

45 - 185 110 - 150 220 - 300

+44 (0) 1630 647200

MAXIMUM HEAD m

CAPACITY l/sec

210 98 196

125 201 201

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

WELLMAN HOSE

T-T are the sole UK distributor for Mandals’ world class range of layflat hoses. Mandals’ Wellman series of hoses are designed as a flexible and permanent replacement for rigid steel, PVC and fibreglass piping for well extraction. Wellman hoses offer premium hydraulic efficiency when paired with a submersible pump and for rapid pump installation and retrieval.

FEATURES

– Compact for easy storage and transportation – The high-grade polyurethane construction material is resistant to fuels, chemicals, abrasion and microbial attacks – Lightweight and high strength – High pressure and flow rate water delivery – Hoses expand to between 15% - 20% of their original size when operating to reduce friction loss and maximise hydraulic performance – Wellman 300 WRAS approved

APPLICATIONS Wellman 120 – Domestic systems – Light industrial applications – Groundwater/well extraction – Irrigation and greenkeeping

WELLMAN 120

Wellman 300 – Groundwater/well extraction – Potable water handling – Food processing – Agriculture and irrigation – Mine de-watering – Solar power systems – Emergency response services SCAN TO SHOP ONLINE TYPE

WELLMAN 300

MAXIMUM CAPACITY l/sec

DIAMETER mm

LENGTH METRES MAX

MAX OPERATION PRESSURE

WEIGHT kg

32 MM WELLMAN 120, DIV. LGD. HU/WML032SM997

2.9

32 MM WELLMAN 120, DIV. LGD.

HU/WML051SM997

9.2

120

25 bar

0.31

120

24 bar

0.5

51 MM WELLMAN 300, 200 M

HU/WMS051BM200

300

31 bar

0.7

51 MM WELLMAN 300, DUAL STRAP, 200 MTR

HU/ WMS051BM200DS

300

31 bar

0.7

51 MM WELLMAN 300, DUAL STRAP, DIV. LGD

HU/ WMS051BM997DS

300

31 bar

0.7

76 MM WELLMAN300, 200 M

HU/WMS076BM200

300

31 bar

102 MM WELLMAN 300, 200 M

HU/WMS102BM200

102

300

31 bar

102 MM WELLMAN300, DUAL STRAP, 200 M

HU/ WMS102BM200DS

102

300

31 bar

127 MM WELLMAN300, 200 M

HU/WMS127BM200

127

280

29 bar

152 MM WELLMANN 300, 200 M

HU/WMS152BM200

105

152

280

29 bar

105

152 MM WELLMAN 300, DUAL STRAP, 200 MTR

HU/ WMS152BM200DS

105

152

280

29 bar

105

Same day dispatch.

PRODUCT CODE

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 119

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

Potable / Cleanwater Pumps 4HS RANGE

A range of 4” electric multi-stage submersible borehole pumps specifically designed to operate at high electrical frequencies, resulting in expansive duty coverage from each model.

PERFORMANCE DATA

180 160 140

Supplied as a package consisting of a pump, surface control module and pressure transducer, the unit requires minimal parameter set up on site before ‘self tuning’ to optimise its performance and duty point.

120 HEAD / m

POTABLE / CLEANWATER - 6

Borehole Pumps

100 80

Using frequency control enables the system to maintain pressure with respect to demand, therefore reducing energy costs and extending pump life.

FEATURES

40 20

– Stainless steel construction – Resin encapsulated stator – Built-in integrated inverter module – Variable speed performance - covering expansive duty requirements – Easy to commission

0.17

0.33

0.83

1.11

1.38

1.66

1.94

2.27

2.5

2.7

3.03

CAPACITY / l/sec

BENEFITS

– Designed for reliability and long life – Great performance – High efficiency – Quality engineered SCAN TO SHOP ONLINE

4HS PUMP PUMP TYPE 1.8KW 4HS MULTISTAGE PUMP 60MH 3.2KW 4HS MULTISTAGE PUMP 120MH 1.8KW 4HS MULTISTAGE PUMP 47MH 3.2KW 4HS MULTISTAGE PUMP 94MH 1.8KW 4HS MULTISTAGE PUMP 35MH 3.2KW 4HS MULTISTAGE PUMP 58MH

ttpumps.com 120

SUPPLIED AS A COMPLETE SET READY FOR INSTALLATION

PRODUCT CODE

CURVE

OUTPUT

PNA/4HS-03/05 PNA/4HS-03/10 PNA/4HS-05/04 PNA/4HS-05/08 PNA/4HS-08/03 PNA/4HS-08/05

A\ B\ C\ D\ E\ F\

1.8 3.2 1.8 3.2 1.8 3.2

+44 (0) 1630 647200

WEIGHT kg

VASCO DELIVERY STATUS

21.2 23.2 21 23 21 22

Same day dispatch.

Lead time may apply.

VASCO VARIABLE SPEED DRIVE

Vasco is a purpose built range of variable speed drives, designed to control and protect pumping systems based on changing the motor frequency and pump speed. Vasco units are extremely compact, can be connected to any pump on the market and will control the operation of the pump to maintain a constant desired pump performance (e.g. pressure, flow, temperature etc.) The easy to configure settings allow the Vasco to determine the most effective duty point for the pumps and system. Body construction is entirely aluminium, making the units solid, lightweight and easily cooled. Protected to IP55, the Vasco units can be installed in virtually any location including humid and dusty environments.

FEATURES

– IP55 construction – Start / stop function – Reduce the spikes on the motor coils caused by voltage reflection (dv/dt filters) – Avoid electromagnetic noise in the surrounding environment (sinusoidal filters) – Easy to navigate menus – Remote bluetooth interrogation for fault diagnosis – Overload motor protection – Motor dry-run protection – Displays motors hours run and running current – Operates multiple DOL motors through one Vasco – Communication between inverters allows them to operate together in ‘cascade’ mode

BENEFITS

– Energy efficient – Simple to install – Increased pump life – Good reliability – Improved pump and system efficiency – Motor mounting and wall mounting kits available – Popular product – Minimises running costs

SCAN TO SHOP ONLINE

TYPE

VOLTAGE INPUT

VASCO 209 1Ph

1 x 230

VASCO 214 1Ph

1 x 230

VASCO 218 1PH VASCO 406 3PH VASCO 409 3PH VASCO 414 3PH VASCO 418 3PH VASCO 425 3PH VASCO 430 3PH VASCO 438 3PH VASCO 448 3PH VASCO 465 3PH MOTOR MOUNT KIT 209/214/406/409 MOTOR MOUNT KIT 414/418/425/430 MOTOR MOUNT KIT 438/448/465 WALL MOUNT KIT 209/214 WALL MOUNT KIT 406/409 WALL MOUNT KIT 414/418/425 0-16BAR PRESS.SENSOR 4-20MA

1 X 230 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 N/A N/A N/A N/A N/A N/A N/A

Same day dispatch.

VOLTAGE OUTPUT 1 x 230 3 x 230 1 x 230 3 x 230 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 N/A N/A N/A N/A N/A N/A N/A

Lead time may apply.

RATING amps 9 7 9 11 18 6 9 14 18 25 30 38 48 65 N/A N/A N/A N/A N/A N/A N/A

TYPICAL POWER P2 (kW) 1.1 1.5 1.1 3.0 4 2.2 4 5.5 7.5 11 15 18.5 22 30 N/A N/A N/A N/A N/A N/A N/A

CODE

DELIVERY STATUS

PNA/V209 PNA/V214 PNA/V218 PNA/V406 PNA/V409 PNA/V414 PNA/V418 PNA/V425 PNA/V430 PNA/V438 PNA/V448 PNA/V465 PNA/MOTORKIT1 PNA/MOTORKIT2 PNA/MOTORKIT3 PNA/WALLKIT1 PNA/WALLKIT2 PNA/WALLKIT3 PNA/PRESS.SENSOR

ttpumps.com

+44 (0) 1630 647200 121

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps ACCESSORIES

PRESSURE SWITCH TYPE

CODE

BAR

PRITCPM5

PIS/PM5

1-5

PRITCPM12

PIS/PM12

3-12

PRITCPM5/3PH

PIS/PMT5

1-5

PRITCPM12/3PH

PIS/PMT12

3-12

DELIVERY STATUS

FLEXIBLE HOSES CODE

LENGTH mm

CONNECTION inch

PIS/FMFG0150

500

PIS/FMFG0160

600

PIS/FMFG0180

800

PIS/FMFG01N1

1000

DELIVERY STATUS

PRESSURE GAUGE TYPE

CODE

PRESSURE

Ø DIAMETER mm

R6 GAUGE

PIS/MANAR5206

0-6

R12 GAUGE

PIS/MANAR5212

0-12

B6 GAUGE

PIS/MANAP5206

0-6

B12 GAUGE

PIS/MANAP5212

0-12

DELIVERY STATUS

B6/B12

R6/R12

WATER CONNECTION (MULTI-WAY FITTING) TYPE

CODE

LENGTH mm

CONNECTION inch

3 WAY

PIS/RAC3V172

5 WAY

PIS/RAC5V182

DELIVERY STATUS

PRESSURE TRANSDUCER TYPE

CODE

BAR

4-20mA

PNA/PRESS.SENSOR

0-16

ttpumps.com 122

CONNECTION inch 1

DELIVERY STATUS

/4 MBSP

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

SMART 10 / SMART 16 / SMART 25

The easy to set up and reliable device, T-T Smart 10 is a pressure controller for domestic and industrial use. Designed with usability in mind, this device can be used for pump control, pressure regulation and booster systems.

FEATURES

– Smart 10 inlet - bronze – Smart 16 / 25 inlet - stainless steel – Dry running protection – Compact, lightweight design

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

BENEFITS

– Easy to use – Energy efficient – Lightweight TYPE

CODE

MAX PRESSURE bar

WEIGHT kg

SMART 10 PRESSURE CONTROLLER

TTP/SMART10

0.35

SMART 16 PRESSURE CONTROLLER

TTP/SMART16

0.4

SMART 25 PRESSURE CONTROLLER

TTP/SMART25

0.35

DELIVERY STATUS

SCAN TO SHOP ONLINE

PTRONIC ELECTRIC PRESSURE SWITCH

The Ptronic electric pump pressure switch gives you full insight and control of your pump’s operating pressure in real-time, with a digital display to make managing your system’s fluid pressure simple. Protect your pump from the damaging effects of dry running, water hammer and overheating with the Ptronic pump pressure switch.

FEATURES

– Dry running protection (with pre-set automatic restarts available) – Pump motor protection in the case of a current overload – Integrated check valve to prevent reverse flow and water hammer from damaging the pump system – Real-time pressure display for easy monitoring and adjustments – Digital display for simple setup of pump start and stop pressure values

TYPE

INLET X OUTLET mm

RATED MOTOR POWER kw

MAX WATER TEMPERATURE

MAX AMP

PUMP START PRESSURE bar

WEIGHT kg

PJS/83110380

25 x 25

0.37 - 2.2

50°C

0.5 - 7

0.3

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS SCAN TO SHOP ONLINE

+44 (0) 1630 647200 123

PRESSURE VESSELS

Pressure Vessels are designed to maintain a predefined liquid pressure, which is usually greater than normal air pressure. They are mainly used in water booster systems, hot water circuits up to 100ºC and for many other applications. Available with counter flanges lined with polypropylene, this new device avoids contact between water and the counter flange, granting complete protection from corrosion and acting as a Water Flow Deflector. A simple and innovative solution that reduces installation maintenance and grants durability and reliability.

FEATURES

10BAR

16BAR

VERTICAL

10BAR

– Interchangeable bladder – 10 - 16 bar maximum working pressure – 1.5 & 2 bar standard pre-loading pressure – Working temperature: 10ºC - 100ºC – Blue external finish colour – EPDM rubber membrane – Horizontal and vertical options available – WRAS approved product

HORIZONTAL

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

VESSEL TYPE

PRODUCT CODE

AV2/10BAR AV5/10BAR AV8/10BAR AV12/10BAR AV18/10BAR AV24/10BAR AV35/10BAR AV50/10BAR AV60/10BAR AV80/10BAR AV100/10BAR AV150/10BAR AV200/10BAR AV300/10BAR AV500/10BAR AV8/16BAR AV12/16BAR AV18/16BAR AV24/16BAR AV35/16BAR AV50/16BAR AV60/16BAR AV80/16BAR AV100/16BAR AV150/16BAR AV200/16BAR AV300/16BAR AV500/16BAR AO18/10BAR AO24/10BAR AO35/10BAR AO50/10BAR AO60/10BAR AO80/10BAR AO100/10BAR AO150/10BAR AO200/10BAR AO300/10BAR

PI/AV2/10BAR PI/AV5/10BAR PI/AV8/16BAR PI/AV12/10BAR PI/AV18/10BAR PI/AV24/10BAR PI/AV35/10BAR PI/AV50/10BAR PI/AV60/10BAR PI/AV80/10BAR PI/AV100/10BAR PI/AV150/10BAR PI/AV200/10BAR PI/AV300/10BAR PI/AV500/10BAR PI/AV8/16BAR PI/AV12/16BAR PI/AV18/16BAR PI/AV24/16BAR PI/AV35/16BAR PI/AV50/16BAR PI/AV60/16BAR PI/AV80/16BAR PI/AV100/16BAR PI/AV150/16BAR PI/AV200/16BAR PI/AV300/16BAR PI/AV500/16BAR PI/AO18/10BAR PI/AO24/10BAR PI/AO35/10BAR PI/AO50/10BAR PI/AO60/10BAR PI/AO80/10BAR PI/AO100/10BAR PI/AO150/10BAR PI/AO200/10BAR PI/AO300/10BAR

BENEFITS

– Built for reliability – Designed for long life – Easy to maintain and repair – Long term spares available – Popular product

PRESSURE VESSEL HEIGHT mm 189 304 316 295 428 489 450 656 761 790 774 927 1020 1243 1493 316 295 428 489 450 656 761 790 774 927 1020 1243 1493 305 300 376 380 385 430 520 628 628 680

DIAMETER mm 160 160 200 280 280 280 365 365 365 410 495 550 600 650 750 200 280 280 280 365 365 365 410 495 550 600 650 750 280 280 365 365 365 410 495 600 600 650

LENGTH mm 465 492 450 570 675 677 685 915 915 1082

CONNECTION inch 3 /4 3 /4 3 /4 3 /4 3 /4 1 1 1 1 1 1 1 1 1/4 1 1/4 1 1/4 3 /4 3 /4 3 /4 1 1 1 1 1 1 1 1 1/4 1 1/4 1 1/4 1 1 1 1 1 1 1 1 1/4 1 1/4 1 1/4

COUNTER FLANGES DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: Also available in stainless steel

ttpumps.com 124

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

ACCESSORIES

RED VESSELS

BLUE VESSELS

INTERCHANGEABLE BLADDERS TYPE

PRODUCT CODE

MATERIAL

Ø DIAMETER mm

AV2, AV5

PIS/ME012A

EPDM

AV8, AV12

PIS/ME024A

EPDM

AV18, AO18

PIS/ME050A

EPDM

AV24, AO24

PIS/ME080A

EPDM

AV35, AV50, AO35, AO50

PIS/ME100A

EPDM

AV60, AV80, AO60, AO80

PIS/ME150A

EPDM

AV100, AO100

PIS/ME200A

EPDM

200

AV150, AO150

PIS/ME300A

EPDM

200

AV200, AO200

PIS/ME500A

EPDM

200

AV300, AO300

PIS/MEN10A

EPDM

200

AV500, AO500

PIS/MEN20A

EPDM

220

AV750, AV1000

PIS/MEN30A

EPDM

250

AV1500, AO2000

PIS/MEN40A

EPDM

250

AV3000, AO4000

PIS/MEN50A

EPDM

250

R2, R5

PIS/ME012R

EPDM

R8, R12

PIS/ME024R

EPDM

R18

PIS/ME050R

EPDM

R24

PIS/ME080R

EPDM

R35, R50, RV35, RV50

PIS/ME150R

EPDM

RV60, RV80

PIS/ME300R

EPDM

RV100, RV120, RV150

PIS/ME500R

EPDM

200

RV200, RV250, RV300

PIS/ME600R

EPDM

200

RV500

PIS/MEN10R

EPDM

200

RV750, RV1000

PIS/MEN20R

EPDM

220

RV1500, RV2000

PIS/MEN30R

EPDM

250

RV3000, RV4000

PIS/MEN40R

EPDM

250

DELIVERY STATUS

SCAN TO SHOP ONLINE

COUNTER FLANGES PRODUCT CODE

MODEL DIAMETER mm

CONNECTION inch

FINISHED

PIS/CFF095TRF008Z

GALVANISED

PIS/CFF095TRF007Z

STAINLESS STEEL

PIS/CFX095TRX004B

STAINLESS STEEL

PIS/CFF145TRF008Z

145

STAINLESS STEEL

PIS/CFX145TRX008B

145

GALVANISED

PIS/CFF145TRF007Z

145

GALVANISED

PIS/CFX145TRX004B

145

STAINLESS STEEL

PIS/CFF260TRF001Z

260

1 1/4

GALVANISED

PIS/CFX260TRX001B

260

1 /4

STAINLESS STEEL

Same day dispatch.

Lead time may apply.

DELIVERY STATUS

ttpumps.com

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 125

POTABLE / CLEANWATER - 6

Potable / Cleanwater Pumps

Notes

ttpumps.com 126

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Industrial / Lubricant / Fuel Pumps

SECTION 07 INDUSTRIAL / LUBRICANT / FUEL PUMPS

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 127

EP BRONZE

The EP range of self-priming transfer pumps feature a bronze constructed pump body and liquid ring impeller for transferring liquids with bronze compatibility. This pump also features a bidirectional motor.

PERFORMANCE DATA

FEATURES

– Bronze construction – Suitable for use with sea water when 316 stainless steel added – 12 & 24 volt available for vehicle use – Self-priming – Reversible operation – Excellent priming action

HEAD / m

INDUSTRIAL PUMPS - 7

Industrial / Lubricant / Fuel Pumps

20 B 10

BENEFITS

– Built for reliability – Designed for long life – Fully repairable – Great site partner – Lightweight – Popular product – Robust design – Superior materials used

A 0

0.83

1.6

E 2.5

3.3

4.1

5.8

6.6

7.5

8.3

CAPACITY / l/sec

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

EP25 12 VOLT

PL/EP25/12

OUTPUT

DISCHARGE

MAXIMUM

WEIGHT kg

amp

inch BSP

HEAD m

CAPACITY l/sec

0.45

25 x 25

1x1

0.88

9.2

EP25 24 VOLT

PL/EP25/24

0.45

25 x 25

1x1

0.88

9.3

EP25 230V/1Ph

PL/EP25/1

4.2

0.45

25 x 25

1x1

9.8

EP25 110V/1Ph

PL/EP25/2

9.8

0.45

25 x 25

1x1

9.8

EP25 400V/3Ph

PL/EP25/3

0.56

25 x 25

1x1

9.8

EP30 230V/1Ph

PL/EP30/1

5.1

0.75

32 x 32

1 1/4 x 1 1/4

1.2

13.5

EP30 110V/1Ph

PL/EP30/2

0.75

32 x 32

1 1/4 x 1 1/4

1.2

13.5

EP30 400V/3Ph

PL/EP30/3

2.1

0.75

32 x 32

1 /4 x 1 /4

1.2

13.2

1½x1½

EP40 230V/1Ph

PL/EP40/1

5.3

0.75

40 x 40

16.2

EP40 110V/1Ph

PL/EP40/2

11.1

0.75

40 x 40

1½x1½

16.2

EP40 400V/3Ph

PL/EP40/3

1.75

0.75

40 x 40

1½x1½

15.7

EP50 400V/3Ph

PL/EP50/3

4.36

1.86

50 x 50

2x2

3.8

26.5

EP70 400V/3Ph

PL/EP70/3

11.8

5.5

70 x 70

2 3/4 x 2 3/4

8.3

TROLLEY FOR EP25 TO EP40

PLS/36202002

HEAVY-DUTY CARRY FRAME

PLS/FRAME25

ttpumps.com 128

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

EP STAINLESS STEEL

FEATURES

– Stainless steel construction – Self-priming – Reversible operation – Excellent priming action

PERFORMANCE DATA

35 30 25 HEAD / m

The EP is a single stage centrifugal pump for handling clear water without abrasive particles or chemically aggressive substances. With a stainless steel pump body, stainless steel impeller shaft fitted with ceramic-graphite-NBR mechanical seal. This range possesses a hydrodynamic closed impeller design, allowing it to achieve its pressure and flow with minimal loss of efficiency.

20 15 10 5

BENEFITS

– Built for reliability – Designed for long life – Fully repairable – Great site partner – Lightweight – Popular product – Robust design – Superior materials used

A 0

0.83

1.6

2.5

3.3

4.1

CAPACITY / l/sec

SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

EP JUNIOR 110V/1Ph

PL/JUNIOR/2

EP JUNIOR 230V/1Ph

PL/JUNIOR/1

OUTPUT

DISCHARGE

MAXIMUM

WEIGHT kg

amp

inch

HEAD m

CAPACITY l/sec

9.8

0.45

32 x 32

1 1/4 x 1 1/4

0.88

9.5

0.45

32 x 32

1 1/4 x 1 1/4

0.88

9.5

EP JUNIOR 400V/3Ph

PL/JUNIOR/3

0.56

32 x 32

1 /4 x 1 /4

0.88

9.6

EP SENIOR 110V/1Ph

PL/SENIOR/2

0.75

40 x 40

1½x1½

17.5

EP SENIOR 230V/1Ph

PL/SENIOR/1

5.3

0.75

40 x 40

1½x1½

17.5

40 x 40

1½x1½

EP SENIOR 400V/3Ph

PL/SENIOR/3

1.75

0.75

17.6

EP MASTER 110V/1Ph

PL/MASTER/2

1.86

50 x 50

2x2

3.8

27.5

EP MASTER 230V/1Ph

PL/MASTER/1

9.3

1.86

50 x 50

2x2

3.8

27.5

EP MASTER 400V/3Ph

PL/MASTER/3

4.36

1.86

50 x 50

2x2

8.3

26.5

TROLLEY FOR JUNIOR/ MASTER/SENIOR

PLS/36202002

Same day dispatch.

Lead time may apply.

DELIVERY STATUS

ttpumps.com

+44 (0) 1630 647200 129

INDUSTRIAL PUMPS - 7

Industrial / Lubricant / Fuel Pumps

IRON50 DIESEL TRANSFER PUMP Diesel transfer pumps that incorporate a self-adjusting rotary vain design. The cast iron pump body is fitted with a bypass valve and stainless steel filter in the suction.

PERFORMANCE DATA

3 2.5

FEATURES

– Cast iron construction – Self-priming – Reversible operation – Excellent priming action – 12 & 24 volt available for vehicle use – Cleanable steel filter

PRESSURE / bar

INDUSTRIAL PUMPS - 7

Industrial / Lubricant / Fuel Pumps

2 1.5 1 B

0.5

BENEFITS

– Robust design – Superior materials used – Built for reliability – Designed for long life

IRON50 230V

A 0

1.6

0.33

0.5

0.66

0.83

FLOW / l/sec

SCAN TO SHOP ONLINE

IRON50 12V & 24V

PRODUCT CODE

CURVE

IRON50 12VDC

PG/AG-35-12VDC

IRON50 24VDC

PG/AG-35-24VDC

PUMP TYPE

SUCTION LIFT m

amp

OUTPUT kW

DISCHARGE inch

HEAD m

MAXIMUM CAPACITY l/sec

CABLE m

WEIGHT kg

2.7

18 – 24

0.3

2.7

9 – 17

0.3

0.83

4.5

0.83

4.5

IRON50 12VDC KIT

PG/DBK-12VDC

2.7

18 – 24

0.3

0.83

IRON50 230V

PG/AG-46-220VAC

2.7

1.2 – 2

0.25

0.83

8.5

DELIVERY STATUS

Please note: See our EP range for larger flow. (Page 128)

ttpumps.com 130

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

AG90 DIESEL TRANSFER PUMP The AG90 range of diesel transfer pumps incorporate a selfadjusting rotary vane, and its cast-iron pump body is fitted with a bypass valve.

A PERFORMANCE DATA

2.5 2 PRESSURE / bar

WITH SWITCH KEY - Available with a built-in switch with key to start and stop the pump without touching the battery clamps. This key can be removed for safety and security reasons.

FEATURES

– Self-priming – Eccentric with self-adjusting blades – Motor 0.37kW (12 & 24VDC) self-ventilated, RPM 1.500 – Connection through F1” (BSP) threads or flanges – Stainless steel filter in the suction of 352 micron – Thermal protection – Continuous duty – 3m cable with clamps

1.5

INDUSTRIAL PUMPS - 7

Industrial / Lubricant / Fuel Pumps

1 0.5 A 0

0.33

0.66

1.3

1.6

FLOW / l/sec

BENEFITS

– Robust design – Superior materials used – Built for reliability and long life PUMP TYPE

PRODUCT CODE

CURVE

AG90 12VDC

PG/AG-90-12VDC

AG90 24VDC

PG/AG-90-24VDC

AG90 12VDC WITH SWITCH AG90 24VDC WITH SWITCH

OUTPUT amp

DISCHARGE

MAXIMUM

SUCTION DELIVERY CABLE WEIGHT DELIVERY LIFT m m kg STATUS m

inch

HEAD CAPACITY m l/sec

35 – 53A 0.37

1.5

1.3

2.7

15.5

24 – 32A 0.37

1.5

1.3

2.7

15.5

PG/AG-9012VDCSW

35 – 53A 0.37

1.5

1.3

2.7

15.5

PG/AG-9024VDCSW

24 – 32A 0.37

1.5

1.3

2.7

15.5

SCAN TO SHOP ONLINE

IRON75 DIESEL TRANSFER PUMP The IRON75 & IRON100 range of diesel transfer pumps incorporate a self-adjusting rotary vane, and its cast iron pump body is fitted with a bypass valve.

PERFORMANCE DATA

3 2.5

FEATURES

PRESSURE / bar

– Self-priming – Eccentric with self-adjusting blades – Bypass pressure 1.4-1, 6 bar / 2.5-3bar – Recirculation bypass – Thermal protection – Continuous duty – IP55 protection – Inlet / outlet 1” (BSP) – 3m electric cable – On / off luminous switch – Anti rust treatment

2 1.5 1 0.5 0

A 0

0.33

0.66

1.3

1.6

FLOW / l/sec

BENEFITS

– Robust design – Superior materials used – Built for reliability and long life PUMP TYPE

IRON75 230V

PRODUCT CODE

CURVE

PG/AG-88

Same day dispatch.

amp

OUTPUT kW

SUCTION LIFT m

DELIVERY m

WEIGHT kg

FLOW l/sec

1.9 – 4.5

0.5

2.7

8.5

1.75

Lead time may apply.

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 131

Industrial / Lubricant / Fuel Pumps INDUSTRIAL PUMPS - 7

HAND PUMPS

A BT-87 SELF SUCTION DRILL PUMP

RHP-25 CI CAST IRON ROTARY OIL PUMP

RHP-25 AL ALUMINIUM ROTARY PUMP

A double action pump suitable for diesel, oil, fuel, alcohol, printing solvents and petrol. It is supplied with a hole to hang the nozzle, the hose and the accessories to prevent dirt and dust entry into the nozzle.

A self-suction rotary pump for a continuous transfer of lubricants and fuels. It is adaptable to barrels from 50 to 200 litres and has a built in M2” adapter with height adjustment for fixing to the barrel.

– Flow according to the drill revolutions (maximum 60 l/min) – Self-suction up to 1.5m – Delivery up to 25m – High resistance dry operation – Eccentric, self-suction pump with self-adjusting blades – Inner part brass – Shaft and pin AISI 304 stainless steel – Pump body, blades and rotor injected in plastic

– Capacity 0.8 litre per stroke – Inlet 1” / Outlet: 3/4” – Hose 2.5m 3/4” – Petrol resistance – Drum plug: adjustable at 2” – Suction tube Ø33.5mm x 1m – Aluminium body – Stainless steel inlet – Hardened steel handle – Selflubricating sealing – Supplied with nozzle hanger

– Type rotary vanes – Capacity 20 litres / 70 round – Suction tube Ø32mm – Discharging tube Ø20mm

PG/BT-87

PG/BMP-1

PGY/RHP-25-CI

PGY/RHP-25-AL

BP-5 LEVER PUMP

TMG-040 BELLOW PUMP

TMG-080 BELLOW PUMP

TMG-150 BELLOW PUMP

APPLICATION

Transferring diesel, all types of lubricants and other non-corrosive fluids from barrels of 50 to 200 litres.

Suitable for the transfer of chemicals, aggressive liquids, solvents, petrol, diesel, water and wine.

A useful accessory to empty baths, aquariums, toilet bowls,washing machines, flooded basements and for caravanning. Suitable for diesel, water, herbicides and antifreeze. It is adapted to any type of hand-held or professional drill (2000/2500rpm) and it can be connected to hose Ø24mm.

TECHNICAL INFORMATION

– Aluminium pump body and discharge tube – Metallic suction telescopic tube of 87cm made of aluminium – Connection 1”, 1 ½ or 2” adaptable to metallic barrels of 50, 100 and 200 litres – Nitrile or viton joints – Transfer capacity 0.3 litres x piston-stroke (litres per lever stroke)

– Plastic construction – Tube pump of 0.4m for 50 litre barrel – Flow 6 l/min (Dependent on the piston-stroke) – Suitable for the refuelling of kerosene stoves

– Plastic construction – Tube pump of 0.8m for 200 litre barrel – Flow 20 l/min (Dependent on the piston-stroke)

– Plastic construction – 1.5m flexible pump – Flow 6 l/min (Dependent on the piston-stroke)

CODE

PG/BP-5

PG/TMG-040

PG/TMG-080

PG/TMG-150

BMP-1 PISTON PUMP

DELIVERY STATUS

ttpumps.com 132

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

AP / AL RANGE

AP / AL range are surface mounted pumps with a self priming capacity of up to 7.5metres, with a solids handling of up to 25mm. This is a very popular pump for many industrial and commercial applications.

PERFORMANCE DATA 20 18

The AP/AL range is constructed from durable materials, with a fully repairable design for a long and reliable operating life.

16 14

FEATURES

HEAD / m

– Rapid self priming up to 7.5metres – Excellent abrasion resistance – Excellent solids handing from 20mm to 25mm – Easily repairable wear components – Choice of models 1 & 3Ph, plus bare shaft AL for alternative prime movers – Liquid temperature: -15°C to +70°C – Maximum working pressure: 6 bar – Maximum ambient temperature: -40°C – Maximum altitude: 1000 m – Insulation class: F – Variable speed drive possible for all motors – Pump Body: cast iron EN-GJL-200 – Impeller: cast iron EN-GJL-200 – Shaft: stainless steel, AISI 420 (1.4028) – Rubber Parts: NBR

12 10 8 C

6 A

2 0 0

1.6

3.3

6.6

8.3

11.6

CAPACITY / l/sec

BENEFITS

– Good solids handling – Repairable – Economical Investment – Designed for long life – Good availability of pumps and spares SCAN TO SHOP ONLINE

PUMP TYPE

PRODUCT CODE

CURVE

AP/97-B 230V

PTS/AP97B-1

AP/97-B 400V AP/97-A 230V

OUTPUT

IP RATING

RPM

IP45

0.75

1.1

4.5

1.1

2.2

4.2

N/A

amp

6.2

0.75

PTS/AP97B-2

2.8

PTS/AP97A-1

8.1

AP/97-A 400V

PTS/AP97A-2

AP/98-A 230V

PTS/AP98A-2

AP/98-A 400V

PTS/AP98A-1

AL/98*

PTS/AP98-1

FRAME

DISCHARGE

MAXIMUM

FREE WEIGHT DELIVERY PASSAGE kg STATUS mm

inch

HEAD m

CAPACITY l/sec

2,900

7.5

IP45

2,900

7.5

23.5

IP45

2,900

16.5

8.3

IP45

2,900

16.5

8.3

24.5

IP55

2,900

18.7

11.1

2.2

IP55

2,900

18.7

11.1

2.2

N/A

18.7

11.1

Please note: *AL/98 is a bare shaft pump and requires a prime mover capable of 2.2kW at 2900RPM.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 133

INDUSTRIAL PUMPS - 7

Industrial / Lubricant / Fuel Pumps

J RANGE

The J range are surface mounted, self-priming, centrifugal pumps with an open impeller, large diameter for solids handling and replaceable wear plates. They have easily opened inspection covers and externally lubricated mechanical seals. Self-Priming Principle: The air (yellow arrows) is drawn into the pump due to the negative pressure created by the moving impeller and is emulsified with the liquid (blue arrows) contained in the pump casing. The air-liquid emulsion is forced into the priming chamber where the lighter air is separated and leaves through the discharge pipe; the heavier liquid drops back down into circulation. Once all of the air has been expelled from the suction pipe, the pump is primed and works like a normal centrifugal pump. The pump can also work with an air-liquid mixture.

PERFORMANCE DATA

150 100 80

The non-return valve has a dual function: it prevents the suction pipe from emptying when the pump is off; in the event of accidental emptying of the suction pipe, this holds a sufficient amount of liquid in the pump casing to prime the pump.

60 50 40 30 HEAD / m

INDUSTRIAL PUMPS - 7

Industrial / Lubricant / Fuel Pumps

J E

A D

SCAN TO SHOP ONLINE

O N

1.6

3.3

8.3

16.6

33.3

83.3

166

333

CAPACITY / l/sec

FEATURES

– Heavy duty casing in cast iron, bronze or stainless steel – Easily opened priming, drain and impeller inspection covers (Not available for J1-160 / 2-200 / 3-100 / 4-100 Models) – Ductile iron, aluminium bronze or stainless steel semi-open impeller for handling large diameter spherical solids – Easily replaced cast iron, abrasion resistant rubber faced cast iron, bronze or stainless steel wear place(s). (Not available for J 1-160 / 2-200 / 3-100 / 4-100 Models) – Externally lubricated mechanical seal. Can run dry on high vacuum even when pumping highly abrasive liquids – Silicon or tungsten carbide seats (graphite rotating seat for versions for petroleum products) – Double or cartridge seats available on request – Bearing housing with heavy duty bearings suitable for direct or v-belt drive – Standard diameter shaft extension bored and tapped to facilitate the assembly of couplings or pulleys – Double or cartridge seals available on request

134

10 8

The discharge pipe must be free to expel the air coming from the suction pipe.

ttpumps.com

+44 (0) 1630 647200

BENEFITS

– Rapid self-priming without foot valve. Once filled with water, the pump is automatically primed to a height of 7.5m – Semi-open impeller allowing the passage of wide solid bodies and easy inspection – High resistance to abrasive liquids: the wear plate is easily replaceable – Axial mechanical seal lubricated from the outside: no leaks or infiltration of air along the shaft – Easy to install: only the suction pipe needs to be immersed in the liquid. The pump can be located above and in a dry place, in the most suitable location for service and control – Long life: the parts subject to wear can be easily replaced, several times, restoring the original performance of the pump

Same day dispatch.

Lead time may apply.

J RANGE PUMP TYPE

B PRODUCT CODE

CURVE

JE 1-110 G10 MM20

PV/8381061039

JE 1-110 G10 NT20

DISCHARGE inch

FREE PASSAGE mm

VOLTAGE V

OUTPUT kW

SPEED RPM

WEIGHT kg

1½

230

1.1

2900

PV/8381063388

1½

400

1.1

2900

JE 1-180 G10 NT20

PV/8381063266

1½

400

2900

JE 2-100 G10 MM20

PV/8381061073

230

1.1

2900

JE 2-100 G10 NT20

PV/8381063383

400

1.1

2900

JE 2-120 G10 MM20

PV/8381061080

230

2.2

2900

JE 2-120 G20 NT20

PV/8381063389

230

2.2

2900

JE 2-120 G10 MT20

PV/4810059076

400

2.2

2900

JE 2-170 G10 NT20

PV/8381063545

400

2900

JE 2-180 G10 NT20

PV/8381063868

400

5.5

2900

JE 2-215 G10 NT20

PV/8381063268

400

2900

200

JE 3-100 G10 MM20

PV/8381061119

230

2.2

2900

JE 3-100 G10 NT20

PV/8381063479

400

2.2

2900

JE 3-140 G10 NT20

PV/8381063574

400

2900

JE 3-180 G10 NT20

PV/8381063267

400

7.5

2900

107

JE 3-210 G10 NT40

PV/8381063867

400

1450

108

JE 4-100 G10 NT20

PV/8381063865

100

400

2900

JE 4-160 G10 NT20

PV/8381063871

100

400

2900

190

JE 4-220 G11 FT40

PV/8381061023

100

400

5.5

1450

190

JE 4-250 G11 FT40

PV/8381061024

100

400

7.5

1450

186

JE 6-250 G11 FT40

PV/8381061033

150

400

1450

279

DELIVERY STATUS

Please note: Other models are available upon request, please speak to our sales department for more information.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 135

INDUSTRIAL PUMPS - 7

Industrial / Lubricant / Fuel Pumps

Notes

ttpumps.com 136

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Pump Accessories

SECTION 08 PUMP ACCESSORIES

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 137

PUMP ACCESSORIES - 8

Pump Accessories HOSE / FITTINGS

SIZE MEDIUM DUTY HOSE BANDS SUCTION-DELIVERY LAYFLAT HOSE (ZINC PLATED) HOSE LAYFLAT HOSE

HOSE BANDS FEMALE BRASS MALE BRASS (ZINC PLATED) HOSETAIL HOSETAIL SUCTION-DELIVERY (BSP THREAD) (BSP THREAD) HOSE

SUCTION STRAINER (STEEL PLATED)

MAXIMUM MAXIMUM CODE WORKING CODE WORKING PRESSURE PRESSURE bar bar

1/2”

VU/BFHT14

VU/BMHT14

3/4”

VU/BFHT20

VU/BMHT20

1”

HU/25LF

HU/HOSEBAND-1

HU/25PNR

HU/HOSEBAND-1.25

VU/BFHT25

VU/BMHT25

FHU/25STRAINER

1 1/4”

HU/32LF

HU/HOSEBAND1.25L

HU/32PNR

HU/HOSEBAND-1.25S

VU/BFHT32

VU/BMHT32

FHU/32STRAINER

1 1/2”

HU/40LF

HU/HOSEBAND-1.5

HU/40PNR

HU/HOSEBAND-1.5S

VU/BFHT40

VU/BMHT40

FHU/40STRAINER

2”

HU/50LF

3.5

HU/HOSEBAND-2

HU/50PNR

HU/HOSEBAND-2S

VU/BFHT50

VU/BMHT50

FHU/50STRAINER

2 1/2”

HU/65LF

HU/HOSEBAND-2.5

HU/65PNR

HU/HOSEBAND-3

VU/BFHT65

VU/BMHT65

FHU/65STRAINER

3”

HU/80LF

HU/HOSEBAND-3L

HU/80PNR

HU/HOSEBAND-3S

VU/BFHT80

VU/BMHT80

FHU/80STRAINER

4”

HU/100LF

HU/HOSEBAND-4

HU/100PNR

HU/HOSEBAND-4S

VU/BFHT100

VU/BMHT100

FHU/100STRAINER

6”

HU/150LF

HU/150PNR

FHU/150STRAINER

8”

HU/200LF

ttpumps.com 138

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

HOSE COUPLINGS

LOCK SIZE MALE FEMALE 0-RING COMPLETE CLOSURE SET MALE RING NP16 A B C D A/B/C/D

FLANGED MALE PN16 E

MALE FLANGED COUPLING FEMALE MALE BSP PN16 THREADED F G

FEMALE COUPLING MALE BSP THREADED H

2”

HU/MHC50-GALV

HU/LR50

HU/FHC50-GALV

HU/OR50

HU/HC50-COMP

HU/FMHC50

HU/FFHC50

HU/MHC50

HU/FHC50

3”

HU/MHC80-GALV

HU/LR80

HU/FHC80-GALV

HU/OR80

HU/HC80-COMP

HU/FMHC80

HU/FFHC80

HU/MHC80

HU/FHC80

4”

HU/MHC100-GALV

HU/LR100

HU/FHC100-GALV

HU/OR100

HU/HC100-COMP HU/FMHC100 HU/FFHC100

HU/MHC100

HU/FHC100

6”

HU/MHC150-GALV

HU/LR150

HU/FHC150-GALV

HU/OR150

HU/HC150-COMP HU/FMHC150 HU/FFHC150

HU/MHC150

HU/FHC150

8”

HU/MHC200-GALV

HU/LR200

HU/FHC200-GALV

HU/OR200

HU/HC200-COMP HU/FMHC200 HU/FFHC200

HU/MHC200

HU/FHC200

LIGHT DUTY PLASTIC COUPLING

SIZE

TYPE

DELIVERY STATUS

LIGHT DUTY ALUMINIUM HOSE COUPLING

SIZE

TYPE

1”

HU/QRHC/ABS-1

1”

HU/QRHC/ALU-1

1 1/4”

HU/QRHC/ABS-1.25

1 1/4”

HU/QRHC/ALU-1.25

1 1/2”

HU/QRHC/ABS-1.5

1 1/2”

HU/QRHC/ALU-1.5

2”

HU/QRHC/ABS-2

2”

HU/QRHC/ALU-2

3”

HU/QRHC/ABS-3

3”

HU/QRHC/ALU-3

4”

HU/QRHC/ABS-4

4”

HU/QRHC/ALU-4

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 139

PUMP ACCESSORIES - 8

Pump Accessories

PUMP ACCESSORIES - 8

Pump Accessories FLEXIBLE COUPLINGS

Flexible couplings are professional connectors that repair damages in pipelines by securely connecting different types of pipes together. Flexible couplings are preferred for sewage systems, household drainage systems, industrial systems and daily use. They are a sustainable option since rubber has a significantly long product life span, instead of renewing your wastewater/rainwater systems you can repair your pipes while reducing your carbon footprint. Technical Specification – Materials: Clamp - 316 Stainless steel Clamp width: 12.7mm Coupling body - EPDM 60 shA Coupling body thickness: 10mm – Specification: EN 681-1 – Tightening torque for stainless clamp: 5 Nm – Pressure resistance: 0.6 Bar

TYPE 1 - ADAPTOR / REDUCER COUPLING

TYPE EB - OFFSET ADAPTOR / REDUCER COUPLING

Standard Coupling – Connects same and different size and material of pipes – Durable for decades – High level ozone resistance – Above and below ground use – 0.6 bar pressure resistance Adaptor / Reducer Coupling – Durable for decades – High level ozone resistance – Above and below ground use – 0.6 bar pressure resistance

TYPE 2 - STRAIGHT COUPLING

MODEL

TYPE A

400363

TYPE 1

70-88

50-61

400364

TYPE 1

75-90

110-115

400332

TYPE 1

70-88

98-114

400365

TYPE 1

98-112

108-122

400366

TYPE 1

110-122

144-160

400334

TYPE 1

98-112

122-144

400367

TYPE 1

98-114

137-152

400335

TYPE 1

98-112

140-162

400368

TYPE 1

95-110

175-200

400330

TYPE 1

145-165

175-200

400331

TYPE 1

145-165

190-216

400370

TYPE 1

192-220

225-248

400371

TYPE 2

50-61

400372

TYPE 2

70-85

400267

TYPE 2

98-114

400333

TYPE 2

145-165

400373

TYPE 2

195-220

400329

TYPE 3

60-76

70-88

400326

TYPE EB

98-114

185-210

400374

TYPE EB

178-198

278-298

400375

TYPE EB

144-164

278-298

ttpumps.com 140

TYPE 3 - INTERNAL STEP REDUCER COUPLING

+44 (0) 1630 647200

BOTH SIDES PIPE DIAMETERS RANGE

DELIVERY STATUS

Same day dispatch.

Lead time may apply.

CAMLOCK FITTINGS

100mm CAMLOCK FITTINGS

80mm CAMLOCK FITTINGS

50mm CAMLOCK FITTINGS

TYPE A

TYPE B

C TYPE C

TYPE D

TYPE E

STOCK REFERENCE

DESCRIPTION

TYPE

HU/FHP50

50mm FEMALE THREADED CAMLOCK PLUG BSPP

TYPE A

HU/MLC50

50mm MALE CAMLOCK LEVER COUPLING BSPP

TYPE B

HU/HTC50

50mm CAMLOCK HOSETAIL LEVER COUPLING

TYPE C

HU/FLC50

50mm FEMALE CAMLOCK LEVER COUPLING BSPP

TYPE D

HU/HT50

50mm CAMLOCK HOSETAIL PLUG

TYPE E

HU/MHP50

50mm MALE THREADED CAMLOCK PLUG BSPP

TYPE F

HU/FTP75

80mm FEMALE CAMLOCK THREADED PLUG BSPP

TYPE A

HU/MLC75

80mm MALE CAMLOCK LEVER COUPLING BSPP

TYPE B

HU/HTC75

80mm CAMLOCK HOSETAIL LEVER COUPLING

TYPE C

HU/FLC75

80mm FEMALE CAMLOCK LEVER COUPLING BSPP

TYPE D

HU/HT75

80mm CAMLOCK HOSETAIL PLUG

TYPE E

HU/MHP75

80mm MALE THREADED CAMLOCK PLUG BSPP

TYPE F

HU/FTP100

100mm FEMALE CAMLOCK THREADED PLUG BSPP

TYPE A

HU/MLC100

100mm MALE CAMLOCK LEVER COUPLING BSPP

TYPE B

HU/HTC100

100mm CAMLOCK HOSETAIL LEVER COUPLING

TYPE C

HU/FLC100

100mm FEMALE CAMLOCK LEVER COUPLING BSPP

TYPE D

HU/HT100

100mm CAMLOCK HOSETAIL PLUG

TYPE E

HU/MHP100

100mm MALE THREADED CAMLOCK PLUG BSPP

TYPE F

Same day dispatch.

Lead time may apply.

ttpumps.com

TYPE F

DELIVERY STATUS

+44 (0) 1630 647200 141

PUMP ACCESSORIES - 8

Pump Accessories

PUMP ACCESSORIES - 8

Pump Accessories DISCHARGE BENDS

Universal flanged discharge bends come complete with male BSP threaded connection to allow for various discharge configurations. Supplied with fixing bolts and EPDM gasket.

FEATURES

– Male BSP – EPDM gasket – Fixing bolts included

PUMP WITH DISCHARGE BEND MODEL/CODE

PUMP TYPE

TT/A4/12414

DN50 PN10 – 16 DISCHARGE BEND

TT/A4/12415

DN80 PN10 – 16 DISCHARGE BEND

DISCHARGE BEND

DELIVERY STATUS

TT/A4/12416

DN100 PN10 – 16 DISCHARGE BEND

TT/BEND75

T-T 305, 505, 510 80MM DISCHARGE BEND - SQUARE FLANGE

TT/BEND100

T-T 1008, 1409 100MM DISCHARGE BEND - SQUARE FLANGE

FLUSH VALVE

Fitted on the pump body within a pumping station, the Flush Valve produces a strong, controlled jet every time the pump is restarted. This valve is automatic and adjustable, capable of removing sediment that can build-up and stop the system. This type of revolutionary valve applies the ‘Venturi’ principle. The valve closure can be timed by acting on a transfer regulator fitted between two chambers and the closing time can be adjusted between 10 and 400 seconds.

FEATURES

– Flanged suction inlet 1 ½” – Cast iron body finished in ecological epoxy vinyl – Hydraulic operation – Durable design – Fully repairable – Closure time setting: 10 - 400 seconds – Maximum flow rate (l/min): 750 - 17000 – Minimum pump weight: 70 kg

142

PUMP TYPE

CODE

WEIGHT kg

FLUSHVALVE

PZS/FLUSH

ttpumps.com

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

NIPPLES, SOCKETS AND BUSHES

HEX NIPPLES MODEL/CODE

DESCRIPTION

ZU/NIP-25-HEX

25mm HEX NIPPLE MSG

ZU/NIP-32-HEX

32mm HEX NIPPLE MSG

ZU/NIP-40-HEX

40mm HEX NIPPLE MSG

ZU/NIP-50-HEX

50mm HEX NIPPLE MSG

DELIVERY STATUS

REDUCING NIPPLES MODEL/CODE

DESCRIPTION

ZU/240-50X25MSG

50 x 25mm REDUCING NIPPLE MSG

ZU/240-50X40MSG

50 x 40mm REDUCING NIPPLE MSG

DELIVERY STATUS

SOCKETS MODEL/CODE

DESCRIPTION

ZU/270-20MSG

20mm SOCKET MSG

ZU/270-25MSG

25mm SOCKET MSG

ZU/270-32MSG

32mm SOCKET MSG

ZU/270-40MSG

40mm SOCKET MSG

ZU/270-50MSG

50mm SOCKET MSG

DELIVERY STATUS

REDUCING BUSHES

Same day dispatch.

MODEL/CODE

DESCRIPTION

DELIVERY STATUS

ZU/241-50X32MSG

50mm MALE X 32mm FEMALE RED. BUSH MSG

ZU/241-50X40MSG

50mm MALE X 40mm FEMALE RED. BUSH GALV

ZU/241-65X50MSG

65mm MALE X 50mm FEMALE RED. BUSH GALV

ZU/241-80X65MSG

80mm MALE X 65mm FEMALE RED. BUSH GALV

ZU/241-100X80MSG

100mm MALE X 80mm FEMALE RED. BUSH GALV

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 143

PUMP ACCESSORIES - 8

Pump Accessories

PUMP ACCESSORIES - 8

Pump Accessories PUMP HOOKS

WILLFIT For use when fitting submersible pumps to non T-T duckfoot designs. Manufactured in heavy-duty cast iron and made as an economical alternative to refitting existing pumping stations.

FEATURES

– Supplied with NBR rubber seal and stainless steel fasteners

PUMP HOOK 65mm - 250mm

PUMP HOOK 32mm - 50mm PRODUCT DESCRIPTION

CODE

WEIGHT kg

50mm ADAPTOR HOOK TO SUIT 3/4” GUIDERAIL NB

PZS/50-P/HOOKNEW

80mm ADAPTOR HOOK TO SUIT 1 ½” GUIDERAIL NB

PZS/80-WILLFIT

100mm ADAPTOR HOOK TO SUIT 1 ½” GUIDERAIL NB

PZS/100-WILLFIT

150mm ADAPTOR HOOK TO SUIT 2” GUIDERAIL NB

PZS/150-WILLFIT

200mm ADAPTOR HOOK TO SUIT 2” GUIDERAIL NB

PZS/200-WILLFIT

250mm ADAPTOR HOOK TO SUIT 2” GUIDERAIL NB

PZS/250-WILLFIT

DELIVERY STATUS

PUMP HOOKS

ZENIT For use with Zenit duckfoot design.

FEATURES

– Supplied with NBR rubber seal and stainless steel fasteners

PUMP HOOK 80mm

PUMP HOOK 32mm - 50mm PRODUCT DESCRIPTION

CODE

WEIGHT kg

50mm ADAPTOR HOOK

PZS/50-P/HOOKNEW

80mm ADAPTOR HOOK

PZS/80-PUMPHOOK

100mm ADAPTOR HOOK

PZS/100-PUMPHOOK

ttpumps.com 144

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

AUTO-COUPLING SETS

DUCKFOOT The Auto-Coupling is fixed to the bottom of the pump chamber and allows the pump to be raised and lowered without emptying the chamber, making repairs and maintenance of the pump much easier and more cost-effective. The mobile section, an integral part of the pump, descends on the guide-rails connected to the fixed part of the device at the bottom of the chamber, until it self-locates in the correct operating position.

FEATURES

– Easy to lift pump for cleaning / maintenance – Robust construction – Consists of pedestal, claw and upper guide rail support brackets – Stainless steel available upon request

DN50

DN100

DN80

TYPE

CODE

PUMP DISCHARGE SIZE

GUIDERAIL INTERNAL DIAMETER

WEIGHT kg

DN50 AUTO COUPLING KIT

TT/ACOUP50

2” / 50mm

3/4” NB

8.5

DN65 AUTO COUPLING KIT

TT/ACOUP65

2 ½” / 65mm

2” NB

DN80 AUTO COUPLING KIT

TT/ACOUP80

3” / 80mm

2” NB

DN100 AUTO COUPLING KIT

TT/ACOUP100

4” / 100mm

2” NB

DN150 AUTO COUPLING KIT

TT/ACOUP150

6” / 150mm

2” NB

116

DN 200 AUTO COUPLING KIT

PZS/200-A/COUP

8” / 200

2” NB

171

DN 250 AUTO COUPLING KIT

PZS/250-A/COUP

10” / 250mm

2” NB

203

DN 300 AUTO COUPLING KIT

PZS/300-A/COUP

12” / 300mm

3” NB

312

DELIVERY STATUS

Please note: Other size couplings are available on request.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 145

PUMP ACCESSORIES - 8

Pump Accessories

AUTO COUPLING ACCESSORIES

T-T’s Auto-Coupling accessories are available in a range of sizes to suit all Duckfoot Auto-Coupling sets, ideal for spares and repairs.

TT/ACOUP80

TT/ACOUP65

TT/ACOUP50

CLAW/HOOK

TT/ACOUP150 TT/ACOUP100

PUMP ACCESSORIES - 8

Pump Accessories

ACCESSORIES

PRODUCT CODE

CLAW/HOOK

TT/ACOUP50/002

CLAW/HOOK SEAL

TT/ACOUP50/004

GUIDERAIL BRACKET

TT/ACOUP50/003

CLAW/HOOK

TT/ACOUP65/002

CLAW/HOOK SEAL

TT/ACOUP65/003

GUIDERAIL BRACKET

TT/GRAILBKT

CLAW/HOOK

TT/ACOUP80/002

CLAW/HOOK SEAL

TT/ACOUP100/003

GUIDERAIL BRACKET

TT/GRAILBKT

CLAW/HOOK

TT/ACOUP100/002

CLAW/HOOK SEAL

TT/ACOUP100/004

GUIDERAIL BRACKET

TT/GRAILBKT

CLAW/HOOK

TT/ACOUP150/002

CLAW/HOOK SEAL

TT/ACOUP150/004

GUIDERAIL BRACKET

TT/GRAILBKT

ttpumps.com 146

CLAW/HOOK SEAL

+44 (0) 1630 647200

GUIDERAIL BRACKET

DELIVERY STATUS

Same day dispatch.

Lead time may apply.

PUMP STANDS

The stands are designed to allow the pump to operate correctly within a sump when an auto-coupling system cannot be used.

HORIZONTAL PUMP STAND

HORIZONTAL MOUTING OF PUMP

VERTICAL MOUTING OF PUMP

VERTICAL PUMP STAND

PUMP TYPE

BASE

E-FlOW & V-FLOW

PRODUCT CODE

WEIGHT kg

TT/E100-0012/A

6.4

T-T305, T-T505 & T-T510

TT/TT505-STAND

1.5

DGO Range

TT/9024.010

2.2

PTS 80

TT/TSV80

3.8

PTS 100

TT/TSV100

5.4

PTS 150

TT/TSV150

APG

TT/9024-006

1.8

GRG

TT/9024-006

1.8

DGG

TT/9024-006

1.8

DGG

TT/9024.007

15.6

DGG

TT/9024-114

DGG

TT/9024-0.31

28.5

DRG

TT/9024-006

1.8

DRG

TT/9024-007

15.6

DRG

TT/9024-010

1.9

DRG

TT/9024-015

DRG

TT/9024-032

53.2

DRG

TT/9024-033

47.6

PTS 80

TT/TSO80

7.4

PTS 100

TT/TSO100

10.9

PTS 150

TT/TSO150

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 147

PUMP ACCESSORIES - 8

Pump Accessories

PUMP ACCESSORIES - 8

Pump Accessories LIFTING CHAIN

Lifting chains are available in both galvanised steel and stainless steel with lifting rings at 1 metre intervals. All our chains are certified to 500kg, with a higher weight capacity version available on request.

MILD STEEL GALVANISED LIFTING CHAINS

STAINLESS STEEL LIFTING CHAINS

LIGHT DUTY SUSPENSION CHAIN (NO LIFTING RINGS)

MILD STEEL GALVANISED D SHACKLE

PUMP TYPE

PRODUCT CODE

SAFE WORKING LOAD kg

MILD STEEL GALVANISED LIFTING CHAIN

WU/CHAIN500

500

STAINLESS STEEL LIFTING CHAIN*

WU/CHAIN500S/S

500

LIGHT DUTY SUSPENSION CHAIN

WU/CHAIN-LD

500

MILD STEEL D SHACKLE

WU/D500MSG

500

STAINLESS STEEL D SHACKLE*

WU/D500ST/ST

500

LIGHT DUTY D SHACKLE

WU/DLINK-LD

500

STAINLESS STEEL D SHACKLE

DELIVERY STATUS

Please note: *Stainless steel lifting chain (WU/CHAIN500S/S) and the stainless steel D shackle (WU/D500ST/ST) are not applicable to category C.

ttpumps.com 148

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves

SECTION 09 WATERWORKS VALVES

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 149

Waterworks Valves WATERWORKS VALVES - 9

Gate Valves

B Resilient seat wedge gate valve used for pipeline isolation. This valve is suitable for potable water duties and buried service.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Standard: EN1074- 1&2: 2000 BS 5163 Pt 1&2: 2004 & EN1171:2002 (Cat.4) – Range: DN50 - DN300 – Flanges & drillings: BS EN 1092-2:1987 table 9 (PN16) – Face to face dimensions: BS EN 558-1:1986 table 3, basic series 3 – Maximum working pressure: 16 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) – Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Unique lightweight ductile iron design – Wedge guides and rolled stem thread for reduced operating friction – Wax filled fasteners for corrosion resistance – Stem seals replaceable under pressure – Body gasket locates within recess to prevent blow out – Clockwise closing spindle as standard in EN10088 1.4401 (SS316) – 100% full bore and body bosses – Low maintenance design suitable for buried service – WRAS approved

– Excellent sealing performance – Superior materials – Good reliability – Excellent corrosion resistance

OPTIONS – Handwheel or stem cap – Chainwheel – Position indicator with optional switches – Anti-clockwise closing spindle – Bypass assembly – Alternative flange drillings

SCAN TO SHOP ONLINE

VALVE TYPE

WEIGHT kg

CODE

DN50

TTF/RGV050

DN65

TTF/RGV065

DN80

TTF/RGV080

DN100

TTF/RGV100

DN125

TTF/RGV125

DN150

TTF/RGV150

DN200

TTF/RGV200

DN250

TTF/RGV250

DN300

117

TTF/RGV300

DELIVERY STATUS

DN: Nominal Diameter.

ttpumps.com 150

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves B Resilient seat wedge gate valve with ISO interface used for pipeline isolation, prepared for actuation. This valve is suitable for potable water duties and buried service.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Standard: EN1074- 1&2: 2000 BS 5163 Pt 1&2: 2004 & EN1171:2002 (Cat.4) – Range: DN50 - DN400 – Flanges & drilling’s: BS EN 1092-2:1987 table 9 (PN16) – Face to face dimensions: BS EN 558-1:1986 table 3, basic series 3 – Maximum working pressure: 16 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) – Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Unique lightweight ductile iron design – ISO 5210 mounting pad with precision machined keyed spindle – Wedge guides and rolled stem thread for reduced operating friction – Wax filled fasteners for corrosion resistance – Stem seals replaceable under pressure – Body gasket located within recess to prevent blow out – Clockwise closing spindle as standard in EN10088 1.4401 (SS316) – 100% full bore and body bosses – Low maintenance design suitable for buried service

– Excellent sealing performance – Superior materials – Cost effective actuation interface – Excellent corrosion resistance

SCAN TO SHOP ONLINE

OPTIONS – Electric actuator – Bevel or spur gearbox – Anti-clockwise closing spindle – Bypass assembly – Alternative flange drillings

– WRAS approved

VALVE TYPE

WEIGHT kg

CODE

DN50

TTF/RGV050ISO

DN80

TTF/RGV080ISO

DN100

TTF/RGV100ISO

DN125

TTF/RGV125ISO

DN150

TTF/RGV150ISO

DN200

TTF/RGV200ISO

DN250

TTF/RGV250ISO

DN300

117

TTF/RGV300ISO

DN350

185

TTF/RGV350ISO

DN400

225

TTF/RGV400ISO

DELIVERY STATUS

DN: Nominal Diameter.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 151

WATERWORKS VALVES - 9

Gate Valves

Waterworks Valves WATERWORKS VALVES - 9

Gate Valves

METAL SEAT GATE VALVE PN16

Metal seat wedge gate valve used for pipeline isolation. Suitable for potable water, wastewater and sewage duties and buried service.

TECHNICAL SPECIFICATION – Standard: BS 5163 Pt 1&2: 2004, EN1171:2002 & EN1074 Pt 1&2:2000 – Range: DN50 - DN300 – Flanges & drillings: BS EN 1092-2:1987 table 9 (PN16) – Face to face dimensions: BS EN 558-1:1986 table 3, basic series 3 – Maximum working pressure: 16 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) – Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

FEATURES

BENEFITS

– Unique lightweight ductile iron design – Precision machined copper alloy seat rings – Durable fusion bonded epoxy coated – Stem seals replaceable under pressure – 100% full bore – Clockwise closing stem as standard – Body bosses & drain plug as standard – Low maintenance design suitable for buried service – WRAS listed materials

– British design – Proven design – Great reliability – Robust design

OPTIONS – Handwheel or stem cap – Chainwheel – Position indicator with optional switches – Anti-clockwise closing spindle – Bypass assembly – Alternative flange drillings

SCAN TO SHOP ONLINE

PN16 FLANGE DRILLINGS VALVE TYPE

WEIGHT kg

CODE

DELIVERY STATUS

DN50

TTF/GATE50

DN65

TTF/GATE65

DN80

TTF/GATE80

DN100

TTF/GATE100

DN125

TTF/GATE125

DN150

TTF/GATE150

DN200

TTF/GATE200

DN250

131

TTF/GATE250

DN300

186

TTF/GATE300

DN: Nominal Diameter.

BS10 IMPERIAL FLANGE DRILLINGS VALVE TYPE

BS10 TABLE

WEIGHT kg

CODE

DN80

D/E

TTF/GATE80/SPEC

DN100

TTF/GATE100/SPEC

DN150

TTF/GATE150/SPEC

DN200

TTF/GATE200/SPEC

DN250

131

TTF/GATE250/SPEC

DN300

186

TTF/GATE300/SPEC

DELIVERY STATUS

DN: Nominal Diameter.

ttpumps.com 152

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves METAL SEAT GATE VALVE PN16 WITH ISO INTERFACE

Metal seat wedge gate valve with ISO interface used for pipeline isolation. This valve is suitable for water, wastewater and sewage applications.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Standard: BS 5163 Pt 1&2: 2004, EN1024 Pt 1&2:2000 – Range: DN80 - DN300 – Flanges & drillings: BS EN 1092-2:1987 table 9 (PN16) – Face to face dimensions: BS EN 558-1:1986 table 3, basic series 3 – Maximum working pressure: 16 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) – Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Unique lightweight ductile iron design – ISO 5210 mounting pad with precision machined keyed spindle – Wedge guides and rolled stem thread for reduced operating friction – Wax filled fasteners for corrosion resistance – Stem seals replaceable under pressure – Body gasket locates within recess to prevent blow out – Clockwise closing spindle as standard – 100% full bore and body bosses

– British design – Proven design – Great reliability – Cost effective actuation interface

OPTIONS – Electric actuator – Bevel or spur gearbox – Anti-clockwise closing spindle – Bypass assembly – Alternative flange drillings

SCAN TO SHOP ONLINE

PN16 FLANGE DRILLINGS VALVE TYPE

WEIGHT kg

CODE

DN80

TTF/GATE80+TTF/ISOF10

DN100

TTF/GATE100+TTF/ISOF10

DN125

TTF/GATE125+TTF/ISOF10

DN150

TTF/GATE150+TTF/ISOF10

DN200

TTF/GATE200+TTF/ISOF14/200

DN250

125

TTF/GATE250+TTF/ISOF14/250

DN300

177

TTF/GATE300+TTF/ISOF14/300

DELIVERY STATUS

DN: Nominal Diameter.

BS10 IMPERIAL FLANGE DRILLINGS VALVE TYPE

BS10 TABLE

WEIGHT kg

CODE

DN80

D/E

TTF/GATE80/SPEC+TTF/ISOF10

DN100

TTF/GATE100/SPEC+TTF/ISOF10

DN150

TTF/GATE150/SPEC+TTF/ISOF10

DN200

TTF/GATE200/SPEC+TTF/ISOF14/200

DN250

125

TTF/GATE250/SPEC+TTF/ISOF14/250

DN300

177

TTF/GATE300/SPEC+TTF/ISOF14/300

DELIVERY STATUS

DN: Nominal Diameter.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 153

WATERWORKS VALVES - 9

Gate Valves

Waterworks Valves WATERWORKS VALVES - 9

Gate Valves

METAL SEAT GATE VALVE PN16

Metal seat wedge gate valve with ISO interface used for pipeline isolation. Suitable for water, wastewater and sewage applications.

TECHNICAL SPECIFICATION – Standard: BS 5163 Pt 1&2: 2004, EN1074 Pt 1&2:2000 – Range: DN350 - DN1200 – Flanges & drillings: BS EN 1092- 2:1987 table 9 (PN16) – Face to face dimensions: BS EN 5581:1986 table 3, basic series 3 – Maximum working pressure: 16 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) VALVE TYPE DN350 DN400 DN450 DN500 DN600 DN700 DN800 DN900 DN1000 DN1200

– Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

FEATURES – Unique ductile iron design – Stem seals replaceable under pressure – 100% full bore – Clockwise closing stem as standard

WEIGHT kg 235 300 385 495 725 995 1340 1960 2950 4200

– Air release as standard – Low maintenance design suitable for buried service – Hand wheel or cap operated stem – Bevel or spur gearboxes available

BENEFITS – Innovative design – Global references – Excellent performance – Cost effective actuation interface

CODE

DELIVERY STATUS

TTF/GATE350 TTF/GATE400 TTF/GATE450 TTF/GATE500 TTF/GATE600 TTF/GATE700 TTF/GATE800 TTF/GATE900 TTF/GATE1000 TTF/GATE1200

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

METAL SEAT GATE VALVE WITH BYPASS PN16

Metal seat wedge gate valve with ISO interface used for pipeline isolation. This valve is suitable for water, wastewater and sewage applications.

– Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

FEATURES – Unique lightweight ductile iron design – Stem seals replaceable under pressure – ISO 5210 mounting flange – Air release as standard

WEIGHT kg 332 412 567 707 1041 1341 1845 2235 3490 5730

– Clockwise closing stem as standard – 100% full bore – Low maintenance design suitable for buried service – Hand wheel or cap operated stem – Bevel or spur gearboxes available

BENEFITS – Innovative design – Cost effective actuation interface – Full range of accessories

CODE

DELIVERY STATUS

TTF/GATE350BP TTF/GATE400BP TTF/GATE450BP TTF/GATE500BP TTF/GATE600BP TTF/GATE700BP TTF/GATE800BP TTF/GATE900BP TTF/GATE1000BP TTF/GATE1200BP

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

Please note: Additional information required / bespoke built item, contact us for more information

ttpumps.com 154

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves METAL SEAT GATE VALVE PN25

Metal seat wedge gate valve used for pipeline isolation. Suitable for potable water, wastewater and sewage duties and buried service.

TECHNICAL SPECIFICATION

FEATURES

– Standard: BS 5163 Pt 1&2: 2004, EN1171:2002 – Range: DN80 - DN300 – Flanges & drilling’s: BS EN 1092-2:1987 table 10 (PN25) – Face to face dimensions: BS EN 558-1:1986 table 3, basic series 3 – Maximum working pressure: 25 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (27.6 bar) Body - 1.5 x PN (36.0 bar)

– Unique lightweight ductile iron design – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed) – Stem seals replaceable under pressure – 100% full bore – Clockwise closing stem as standard – Integral feet to facilitate safe storage – WRAS listed materials

VALVE TYPE DN80 DN100 DN150 DN200 DN250 DN300

WEIGHT kg 27 35 64 101 144 204

BENEFITS

– Robust design – Great reliability

OPTIONS – Electric actuator – Bevel or spur gearbox – Anti-clockwise closing spindle – Handwheel or stem cap – Chainwheel – Bypass assembly – Alternative flange drillings – Position indicator with optional switches

WATERWORKS VALVES - 9

Gate Valves

DELIVERY STATUS

CODE TTF/GATE80/PN25 TTF/GATE100/PN25 TTF/GATE150/PN25 TTF/GATE200/PN25 TTF/GATE250/PN25 TTF/GATE300/PN25

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

METAL SEAT GATE VALVE WITH ISO INTERFACE PN25

Metal seat wedge gate valve used for pipeline isolation. Suitable for potable water, wastewater and sewage duties and buried service.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Standard: BS 5163 Pt 1&2: 2004, EN1171:2002 – Range: DN80 - DN300 – Flanges & drillings: BS EN 1092-2:1987 table 9 (PN25) – Face to face dimensions: BS EN 558-1:1986 table 3, basic series 3 – Maximum working pressure: 25 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (27.6 bar) Body - 1.5 x PN (36.0 bar)

– Unique lightweight ductile iron design – Coating: Blue fusion bonded epoxy ( >300µ and WRAS listed) – Stem seals replaceable under pressure – 100% full bore – Clockwise closing stem as standard – Integral feet to facilitate safe storage – Robust low maintenance design suitable for buried service – WRAS listed materials

– Cost effective actuation interface – Great reliability

VALVE TYPE DN80 DN100 DN150 DN200 DN250 DN300

WEIGHT kg 25 33 62 99 142 202

CODE TTF/GATE80/PN25+TTF/ISOF10 TTF/GATE100/PN25+TTF/ISOF10 TTF/GATE150/PN25+TTF/ISOF10 TTF/GATE200/PN25+TTF/ISOF14/200 TTF/GATE250/PN25+TTF/ISOF14/250 TTF/GATE300/PN25+TTF/ISOF14/300

DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 155

Waterworks Valves WATERWORKS VALVES - 9

Gate Valves

F4 RESILIENT SEAT WEDGE GATE VALVE PN16

Resilient seat wedge gate valve used for pipeline isolation. Suitable for potable water duties and buried service.

TECHNICAL SPECIFICATION – Standard: EN1074- 1&2: 2000, EN1171: 2000 (Cat.4) – Range: DN50 - DN300 – Flanges & drillings: BS EN 10922:1987 table 9 (PN16) – Face to face dimensions: BS EN 558 basic series 14 – Maximum working pressure: 16 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) VALVE TYPE DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300

– Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy ( >300µ and WRAS listed)

– Clockwise closing stem as standard – 100% full bore – Low maintenance design suitable for buried service

FEATURES

BENEFITS

– Unique lightweight ductile iron design – Rolled spindle thread for reduced operating friction – Wax filled fasteners for corrosion resistance – WRAS listed materials WEIGHT kg 13 14 20 24 33 40 64 85 110

– Excellent sealing performance – Easy to use – Good reliability – Excellent corrosion resistance

CODE

DELIVERY STATUS

TTF/RGV50F4 TTF/RGV65F4 TTF/RGV80F4 TTF/RGV100F4 TTF/RGV125F4 TTF/RGV150F4 TTF/RGV200F4 TTF/RGV250F4 TTF/RGV300F4

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

F4 METAL SEAT WEDGE GATE VALVE PN16

Metal seat wedge gate valve used for pipeline isolation. Suitable for potable water duties and buried service.

– Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy ( >300µ and WRAS listed)

FEATURES – Unique lightweight ductile iron design – Rolled spindle thread for reduced operating friction – Wax filled fasteners for corrosion resistance – WRAS listed materials WEIGHT kg 10 15 19 24 37 43 70 101 181

– Clockwise closing stem as standard – 100% full bore – Low maintenance design suitable for buried service

BENEFITS – Proven design – Great reliability – Robust design – Supporting accessories available CODE

DELIVERY STATUS

TTF/GATE50F4 TTF/GATE65F4 TTF/GATE80F4 TTF/GATE100F4 TTF/GATE125F4 TTF/GATE150F4 TTF/GATE200F4 TTF/GATE250F4 TTF/GATE300F4

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

ttpumps.com 156

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves WAFER BUTTERFLY VALVE

Wafer pattern butterfly valve ideal for pipeline isolation and modulation. Suitable for clean water applications up to 90°C.

TECHNICAL SPECIFICATION

FEATURES

– Body: Cast iron EN-GJL-400 – Disc: Stainless steel AISI 316 – Liner: EPDM – Stem: Stainless steel AISI 420 – Bearing: PTFE – Coating: Blue fusion bonded epoxy ( >300µ and WRAS listed)

– EN593 – Replaceable liner – Various disc materials – Various liner materials – Install between PN6/10/16 flanges – Face to face according to EN558 series 20

VALVE TYPE

– WRAS approved – Larger sizes on request – Notched lever, handwheel gearbox or actuated operation

WATERWORKS VALVES - 9

Isolation Valves

BENEFITS – Lightweight design – Easy to install – Reliable performance

DN50 DN65 DN80

WEIGHT kg 3 3 3

CODE TTF/BVW50 TTF/BVW65 TTF/BVW80

DN100

TTF/BVW100

DN125

TTF/BVW125

DN150

TTF/BVW150

DN200

TTF/BVW200

DN250

TTF/BVW250

DN300

TTF/BVW300

DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

LUGGED / TAPPED BUTTERFLY VALVE

Lugged and tapped pattern butterfly valve for isolation and modulation. Suitable for clean water applications up to 90°C.

TECHNICAL SPECIFICATION

FEATURES

– Body: Cast iron EN-GJL-400 – EN593 – Disc: Stainless steel AISI 316 – Replaceable liner – Liner: EPDM – Various disc materials – Stem: Stainless steel AISI 420 – Various liner materials – Bearing: PTFE – Install between 10/16 flanges – Coating: Blue fusion bonded – Face to face according to EN558 epoxy ( >300µ and WRAS listed) series 20 – WRAS approved VALVE TYPE DN50 DN65

WEIGHT kg 4 4

– Larger sizes on request – Notched lever, handwheel gearbox or actuated operation

BENEFITS – Lightweight design – Easy to install – Reliable performance CODE

DELIVERY STATUS

TTF/BVLT50 TTF/BVLT65

DN80

TTF/BVLT80

DN100

TTF/BVLT100

DN125

TTF/BVLT125

DN150 DN200

11 22

TTF/BVLT150 TTF/BVLT200

DN250

TTF/BVLT250

DN300

TTF/BVLT300

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 157

Waterworks Valves ECCENTRIC PLUG VALVE

This bi-directional eccentric plug valve can be used for wide-ranging flow control and isolation applications. Fields of use include clean and dirty water, sludge and slurries, sewage and air up to 70°C. Robust design with flow efficient round port offering lower head loss and improved solids handling.

FEATURES

BENEFITS

– Range: DN50 - DN300, larger on request – Rated to 16 bar – Flange and drillings: BS EN 1092-2: 1987 Table 9 (PN16) – Integral ISO5211 input

– Welded SS316L seat – Fusion bonded epoxy coated ductile iron body – Plug encapsulated in rubber (EPDM WRAS listed or Nitrile) – Adjustable stem seal packing – Self-lubricating bronze bearing brushes

– Innovative design – Excellent performance – Designed for reliable long life – Quality engineered

NBR

TECHNICAL SPECIFICATION

EPDM

WATERWORKS VALVES - 9

Isolation Valves

VALVE TYPE

WEIGHT kg

CODE

DN50

TTF/EP50N

DN65

TTF/EP65N

DN80

TTF/EP80N

DN100

TTF/EP100N

DN150

TTF/EP150N

DN200

TTF/EP200N

DN250

120

TTF/EP250N

DN300 DN80

125 25

TTF/EP300N TTF/EP80E

DN100

TTF/EP100E

DN150

TTF/EP150E

DN200

TTF/EP200E

DN250

120

TTF/EP250E

DN300

125

TTF/EP300E

DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

BI-DIRECTIONAL KNIFE GATE VALVE

Bi-directional, full-bore knife gate valve, with a non-rising spindle and serviceable inline.

FEATURES

– Bi-directional sealing, seals irrespectively of flow direction – Full-bore to allow high flow rates with low pressure drop – Wafer semi-lugged one-piece ductile iron body – Stainless steel chamfered edged polished gate to effectively cut through media VALVE TYPE

– Stainless steel non-rising stem with rolled thread form to reduce friction – No internal cavities avoids sediment accumulation – Adjustable gland follower allowing inservice maintenance – U-shaped NBR seal in one-piece – O-ring on raised-face for flange joint integrity

WEIGHT kg

– Handwheel operated (cap and ISO5210 interface on request) – Flanged to BS EN 1092- 2:1987 TABLE 9 (PN16)

BENEFITS

– Easy to install – Built for reliability

CODE

DN80 KNIFE GATE VALVE

TTF/KGVBI80

DN100 KNIFE GATE VALVE

TTF/KGVBI100

DN125 KNIFE GATE VALVE

TTF/KGVBI125

DN150 KNIFE GATE VALVE

TTF/KGVBI150

DN200 KNIFE GATE VALVE

TTF/KGVBI200

DN250 KNIFE GATE VALVE

TTF/KGVBI250

DN300 KNIFE GATE VALVE

TTF/KGVBI300

DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

ttpumps.com 158

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves UNI-DIRECTIONAL KNIFE GATE VALVE

HANDWHEEL Uni-directional, full-bore knife gate valve, with a rising spindle and serviceable inline.

FEATURES – Uni-Directional sealing, seals in the direction of flow – Full-bore to allow high flow rates with low pressure drop – Wafer semi-legged one-pieced ductile iron body – Stainless steel (SS316/1.4401) chamfered edged polished gate to effectively cut through media – Stainless steel rising stem with rolled thread form to reduce friction

– No internal cavities avoids sediment accumulation – Adjustable gland follower allowing in-service maintenance – Chemically resistant FKM Seat – Corrosion resistant construction – Position indicator as standard – Handwheel – Accessories: limit switches, mechanical lockout and extension spindle

BENEFITS – Lightweight design – Easy to install – Built for reliability – Maintainable in service

VALVE TYPE

WEIGHT kg

CODE

DN50 KNIFE GATE VALVE

TTF/KGV050HW

DN65 KNIFE GATE VALVE

TTF/KGV065HW

DN80 KNIFE GATE VALVE

TTF/KGV080HW

DN100 KNIFE GATE VALVE

TTF/KGV100HW

DN150 KNIFE GATE VALVE

TTF/KGV150HW

WATERWORKS VALVES - 9

Isolation Valves

DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

UNI-DIRECTIONAL KNIFE GATE VALVE

HANDWHEEL Uni-directional, full-bore knife gate valve, with a rising spindle and serviceable inline.

FEATURES – Uni-Directional sealing, seals in the direction of flow – Full-bore to allow high flow rates with low pressure drop – Wafer semi-legged one-pieced stainless steel body – Stainless steel (SS316/1.4401) chamfered edged polished gate to effectively cut through media – Stainless steel rising stem with rolled thread form to reduce friction

BENEFITS – Lightweight design – Easy to install – Built for reliability – Corrosion resistant

VALVE TYPE

WEIGHT kg

CODE

DN50 KNIFE GATE VALVE

TTF/KGV050HW316

DN65 KNIFE GATE VALVE

TTF/KGV065HW316

DN80 KNIFE GATE VALVE

TTF/KGV080HW316

DN100 KNIFE GATE VALVE

TTF/KGV100HW316

DN150 KNIFE GATE VALVE

TTF/KGV150HW316

DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 159

Waterworks Valves WATERWORKS VALVES - 9

Isolation Valves

UNI-DIRECTIONAL KNIFE GATE VALVE

DOUBLE ACTING PNEUMATIC CYLINDER Uni-directional, full-bore knife gate valve, with a rising spindle and serviceable inline.

FEATURES – Uni-Directional sealing, seals in the direction of flow – Full-bore to allow high flow rates with low pressure drop – Wafer semi-lugged one-piece ductile iron body – Stainless steel (SS316/1.4401) chamfered edged polished gate to effectively cut through media – Protection guards as standard

– No internal cavities to avoid sediment accumulation – Adjustable gland follower allowing in-service maintenance – Chemically resistant FKM seat – Corrosion resistant construction – Position indicator as standard – Double acting pneumatic cylinder

BENEFITS – Lightweight design – Easy to install – Built for reliability – Maintainable in service

VALVE TYPE

WEIGHT kg

CODE

DN50 KNIFE GATE VALVE

TTF/KGV050DAC

DN65 KNIFE GATE VALVE

TTF/KGV065DAC

DN80 KNIFE GATE VALVE

TTF/KGV080DAC

DN100 KNIFE GATE VALVE

TTF/KGV100DAC

DN150 KNIFE GATE VALVE

TTF/KGV150DAC

DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

UNI-DIRECTIONAL KNIFE GATE VALVE

DOUBLE ACTING PNEUMATIC CYLINDER Uni-directional, full-bore knife gate valve, with a rising spindle and serviceable inline.

FEATURES – Uni-Directional sealing, seals in the direction of flow – Full-bore to allow high flow rates with low pressure drop – Wafer semi-lugged one-piece stainless steel body – Stainless steel (SS316/1.4401) chamfered edged polished gate to effectively cut through media – Protection guards as standard

VALVE TYPE

BENEFITS – Lightweight design – Easy to install – Built for reliability – Excellent corrosion resistance

WEIGHT kg

CODE

DN50 KNIFE GATE VALVE

TTF/KGV050DAC316

DN65 KNIFE GATE VALVE

TTF/KGV065DAC316

DN80 KNIFE GATE VALVE

TTF/KGV080DAC316

DN100 KNIFE GATE VALVE

TTF/KGV100DAC316

DN150 KNIFE GATE VALVE

TTF/KGV150DAC316

DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

ttpumps.com 160

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves METAL SEAT SWING CHECK VALVE PN16

Metal seat swing check valve used to prevent reverse flow. Suitable for potable water, wastewater and sewage applications.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Standard: BS EN 1074 pt 3: 2000, BS EN12234: 2001 & BS5153: 1974 – Range: DN50 - DN300 – Flanges & drillings: BS EN 1092- 2:1987 table 9 (PN16) – Face to face dimensions: BS EN 558-1:1986 table 10, basic series 10 – Maximum working pressure: 16 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) – Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Unique lightweight ductile iron design – Suitable for horizontal & vertical installation – Positive hexagon drive between shaft & hanger – Optional external lever arm & weight assembly – Bypass bosses and ½“ BSP air release as standard – Robust low maintenance design – Safety guards available – Approvals: WRAS and NSF REG4

– Innovative design – Robust design – Built for reliability – Corrosion resistant

SCAN TO SHOP ONLINE

NON RETURN VALVE VALVE TYPE

WEIGHT kg 12 20 26 50 96 155 215

DN50 DN80 DN100 DN150 DN200 DN250 DN300

CODE

DELIVERY STATUS

TTF/NRV50 TTF/NRV80 TTF/NRV100 TTF/NRV150 TTF/NRV200 TTF/NRV250 TTF/NRV300

DN: Nominal Diameter.

NON RETURN VALVE WITH LEVER WEIGHT VALVE TYPE DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300

WEIGHT kg 15 20 22 28 41 52 98 163 223

CODE

DELIVERY STATUS

TTF/NRV50LW TTF/NRV65LW TTF/NRV80LW TTF/NRV100LW TTF/NRV125LW TTF/NRV150LW TTF/NRV200LW TTF/NRV250LW TTF/NRV300LW

DN: Nominal Diameter.

SAFETY GUARD VALVE TYPE DN50 to DN100 DN125 to DN200 DN250 to DN300

WEIGHT kg 6 8 15

CODE

DELIVERY STATUS

TTF/GUARD80/100 TTF/GUARD150/200 TTF/GUARD250/300

DN: Nominal Diameter.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 161

WATERWORKS VALVES - 9

Check Valves

Waterworks Valves WATERWORKS VALVES - 9

Check Valves

METAL SEAT SWING CHECK VALVE DRILLED BS10 D/E

Metal seat swing check valve used to prevent reverse flow. Suitable for potable water, wastewater and sewage applications.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Standard: BS EN1074 pt 3: 2000, BS EN122341: 2001 & BS 5153:1974 – Range: DN80 - DN300 – Flanges & drillings: 10 table D/E – Face to face dimensions: BS EN 558-1:1986 table 10, basic series 10 – Maximum working pressure: 16 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) – Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Unique lightweight ductile iron design – Suitable for horizontal & vertical installation – Positive hexagon drive between shaft & hanger – External lever arm & weight assembly – Bypass bosses and ½“ BSP air release as standard – Robust low maintenance design – Safety guards available – Approvals: WRAS and NSF REG4

– Designed in the UK – Highly adaptable design – Easy to install – Built for reliability – Corrosion resistant

SCAN TO SHOP ONLINE

NON RETURN VALVE IMPERIAL DRILLINGS VALVE TYPE

WEIGHT kg

BS10 TABLE

CODE

DN80

D/E

TTF/NRV80/SPEC

DN100

TTF/NRV100/SPEC

DN150

TTF/NRV150/SPEC

DN200

TTF/NRV200/SPEC

DN250

163

TTF/NRV250/SPEC

DN300

223

TTF/NRV300/SPEC

DELIVERY STATUS

DN: Nominal Diameter.

NON RETURN VALVE GUARD VALVE TYPE

WEIGHT kg

CODE

DN80 - DN100

TTF/GUARD80/100

DN150 - DN200

TTF/GUARD150/200

DN250 - DN300

TTF/GUARD250/300

DELIVERY STATUS

DN: Nominal Diameter.

ttpumps.com 162

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves METAL SEAT SWING CHECK VALVE PN16

Metal seat swing check valve used to prevent reverse flow. Suitable for potable water, wastewater and sewage applications.

FEATURES

TECHNICAL SPECIFICATION

– Unique lightweight ductile iron design – Durable fusion bonded epoxy coated – Suitable for horizontal & vertical installation – Positive drive between shaft & hanger – Guarded external lever arm & weight assembly as standard – ½“ BSP air release as standard

– Standard: BS EN1074 pt 3: 2000, BS EN12234: 2001 & BS 5153: 1974 – Range: DN350 - DN1200 – Flanges & drillings: BS EN 1092-2:1987 table 9 (PN16) – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) – Temperature range: -10°C to 70°C, insulate at 0°C and below

VALVE TYPE

WEIGHT kg

CODE

DN350 DN400 DN450 DN500 DN600 DN700* DN800* DN900* DN1000* DN1200*

320 440 580 700 930 1500 2050 2600 3200 4200

TTF/NRV350LW TTF/NRV400LW TTF/NRV450LW TTF/NRV500LW TTF/NRV600LW TTF/NRV700LW TTF/NRV800LW TTF/NRV900LW TTF/NRV1000LW TTF/NRV1200LW

– Maximum working pressure: 16 bar – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

WATERWORKS VALVES - 9

Check Valves

BENEFITS – Innovative design – Robust design – Built for reliability – Corrosion resistant DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

Please note: *Not WRAS approved but WRAS listed materials

RECOIL CHECK VALVE

This single door non-slam recoil swing check valve is suited to systems in which rapid flow reversal exists. Suitable for potable and waste water applications.

FEATURES

TECHNICAL SPECIFICATION

– Angled seat for rapid closure – Robust compact ductile iron design – Inspection cover – By-pass, flow sensing switch and multi door options on request – Gunmetal seats – Stainless steel shaft – Larger sizes available on request – WRAS listed materials

– Standard: BS EN12234 – Range: DN50 - DN600 – Flanges & drillings: BS EN 1092-2:1987 table 9 (PN16) – Maximum working pressure: 16 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar)

VALVE TYPE

WEIGHT kg

CODE

DN50 DN80 DN100 DN150 DN200 DN250 DN300 DN350 DN400 DN450 DN500 DN600

20 40 50 115 135 230 320 420 590 800 1020 1270

TTF/RCV50 TTF/RCV80 TTF/RCV100 TTF/RCV150 TTF/RCV200 TTF/RCV250 TTF/RCV300 TTF/RCV350 TTF/RCV400 TTF/RCV450 TTF/RCV500 TTF/RCV600

– Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

BENEFITS

– Excellent performance – Robust design – Built for reliability DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

Please note: Additional information required / bespoke built item, contact us for more information

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 163

Waterworks Valves WATERWORKS VALVES - 9

Check Valves

B The Ballbrake is a self-acting ball check valve rated to 10 bar, suitable for water and wastewater applications to 60°C. Available in two variants; either with a sinking ball or a floating ball on request. The full-bore body and smooth internal profile ensures low pressure loss and reduces the risk of material deposits.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Certified to EN12050-4 – Pressure rating: 10 bar – DN25 to DN65: BSP female threaded connections – DN80 to DN200: Flanged BS EN 1092-2 table 8 (PN10)

– Self-cleaning – Epoxy coated iron, full-bore body – Nitrile encapsulated ball

– Designed in the UK – Independently certified performance – Robust compact design – Built for reliability

VALVE TYPE

WEIGHT kg

CODE

DN25 SINKING

TTF/BCV25S

DN32 SINKING

TTF/BCV32S

DN40 SINKING

TTF/BCV40S

DN50 SINKING

TTF/BCV50S

DN65 SINKING

TTF/BCV65S

DN80 SINKING

TTF/BCV80S

DN100 SINKING

TTF/BCV100S

DN150 SINKING

TTF/BCV150S

DN200 SINKING

109

TTF/BCV200S

DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

Please note: Other sizes available on request.

PENSTOCK

Bi-directional Penstock fabricated in AISI304 stainless steel, flush invert, non-rising stem and suitable for 6 MwC.

FEATURES

BENEFITS

– Bi-directional with resilient sealing to all sides – Fabricated in stainless steel to EN10088 1.4201 (304) or 1.4401 (316) with complementing fasteners – Non-rising rolled stainless steel spindle, rising spindle on request – Self-cleaning high-density polyethylene gate guides for reduced friction – Self-adjusting EPDM seals for optimal sealing performance – Seating pressure: 6MwC on/off seat

– Designed and manufactured in the UK – Lightweight design – Excellent performance – Corrosion resistant

VALVE TYPE

WEIGHT kg

APERTURE

CODE

100 x 100

7.5

SQUARE

TTF/PSTK304100

150 x 150

SQUARE

TTF/PSTK304150

225 x 225

SQUARE

TTF/PSTK304225

300 x 300

SQUARE

TTF/PSTK304300

Ø150

ROUND

TTF/PSTK304150R

DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: Other sizes available on request.

ttpumps.com 164

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves TWIN PLATE CHECK VALVE

Double plate check valve used to prevent reverse flow rated to 16 bar. Suitable for clean water applications up to 100°C.

MATERIALS

FEATURES

BENEFITS

– Body: Cast iron EN-GJL-250 – Plates: Stainless steel AISI 304 – Seal: EPDM – Spring: Stainless steel AISI 316 – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Minimum head loss – Stainless steel plates / spring – Compact robust design – Install between PN6/10/16 flanges – On request: Larger sizes, Viton® seat, stainless steel body, rated 25 bar or – WRAS approved

– Light weight design – Easy to install – Good reliability – Corrosion resistant

VALVE TYPE

WEIGHT kg 1 2 3 4 6 8 14 22 34

DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300

CODE

WATERWORKS VALVES - 9

Check Valves

DELIVERY STATUS

TTF/WCV50 TTF/WCV65 TTF/WCV80 TTF/WCV100 TTF/WCV125 TTF/WCV150 TTF/WCV200 TTF/WCV250 TTF/WCV300

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

DOUBLE HINGE FLAP VALVE

Metal seat double hinge flap valve with circular aperture to prevent reverse flow in outfall applications. Typically utilised in river, surface / storm water and treatment works outfalls.

TECHNICAL SPECIFICATION

FEATURES

– Range: DN80 - DN600 – Drillings: BS EN 1092-2:1987 table 9 (PN16). *BS10 table D – Maximum working pressure: 6.0 metres static on-seat head – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Unique lightweight ductile iron design – Double hinge for optimal sealing – Durable fusion bonded epoxy coated – Anti-tamper stainless steel hinge pins – Bushed hinge links – Corrosion resistant construction

VALVE TYPE DN80 DN100 DN150 DN200 DN225* DN250 DN300 DN350/375* DN400 DN450 DN500 DN600

WEIGHT kg 5 6 11 16 20 23 32 34 49 56 68 93

– Lifting eye as standard – Drilled to suit flange & wall mounting – WRAS listed materials

BENEFITS – Designed in the UK – Lightweight – Robust construction

CODE TTF/DHFV080 TTF/DHFV100 TTF/DHFV150 TTF/DHFV200 TTF/DHFV225 TTF/DHFV250 TTF/DHFV300 TTF/DHFV350 TTF/DHFV400 TTF/DHFV450 TTF/DHFV500 TTF/DHFV600

DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 165

Waterworks Valves WATERWORKS VALVES - 9

Check Valves

B The Floaway® anti-flood valve is a simple yet effective backflow prevention valve for use within both domestic and commercial sewage and wastewater drainage network applications. The Floaway® is an inline self-acting device with a manual lockable door. The design of the valve incorporates smooth walls with rounded corners to prevent solids from accumulating and to avoid septic odour. There is also a Floaway® anti-flood valve with double flap now available, featuring a double self-acting flap (one lockable) reinforced with stainless steel.

TECHNICAL SPECIFICATION – European standard EN13564-1:2002 – Conforms to building regulation part h1 section 2.8 - 2.12

FEATURES – Manual lockable door – Lightweight and robust PVC body – Stainless steel internal flap – Large inspection cover – Easy installation

BENEFITS – Lightweight design – Corrosion resistant – Trouble free – Easy to install

SCAN TO SHOP ONLINE

VALVE TYPE

WEIGHT kg

CODE

ET110

110

1.9

TTF/ABS110NRV

ET160

160

1.9

TTF/ABS160NRV

ET110 DOUBLE

110

TTF/ABS110NRVDD

ttpumps.com 166

OUTLET mm

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

Waterworks Valves COMPACT WASTEWATER AIR VALVE

A compact double orifice air valve with three functions: – Efficient release of gas to prevent pressure build-up – Ingress of gas to prevent vacuum in the pipe system – Controlled bleed of gas to maintain system stability Suitable for wastewater and sewage applications.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Inlet: 2” BSP – Maximum working pressure: 16 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) – Temperature range: -10°C to 60°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Directly acting stainless steel float – Excellent outflow performance – Sloped float chamber – Corrosion resistant construction – Tapped cowl for piped outflow – Drainage valve as standard – Robust low maintenance design – Also available in stainless steel

– Innovative design – Compact and lightweight design – Excellent performance – Corrosion resistant

OPTIONS – Isolating gate valve (recommended) – Anti shock system to prevent water hammer – Flanged inlet – Rapid fill protection

PERFORMANCE DATA

1.5 1.4 1.3

AIR DISCHARGE DURING PIPE FILLING

1.2

bar

1.1 1 1

100

200

300

400

500

0.9 0.8 A

0.7

AIR INTAKE DURING PIPE DRAINING

0.6 0.5

100

200

300

400

500

m3/h

VALVE TYPE

CURVE

WEIGHT kg

CODE

2” BSP PN16

10.5

TTF/AV25

DELIVERY STATUS

SCAN TO SHOP ONLINE

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 167

WATERWORKS VALVES - 9

Air Valves

Waterworks Valves WATERWORKS VALVES - 9

Air Valves

WASTEWATER AIR VALVE

A double orifice air valve with four functions: – Efficient release of gas to prevent pressure build-up – Ingress of gas to prevent vacuum in the pipe system – Controlled bleed of gas to maintain system stability – Rapid fill technology to avoid slam Suitable for wastewater & sewage applications.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Range: DN50 - DN200 – Flanges & drillings: BS EN1092-2 1987 table 9 (PN16) – Maximum working pressure: 16 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) – Temperature range: -10°C to 60°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Unique lightweight ductile iron design – Directly acting float mechanism – Corrosion resistant construction – Drainage valve as standard – Robust low maintenance design – Large sloped float chamber – Also available in stainless steel – Tapped cowl available for piped outflow

– Innovative design – Robust design – Excellent performance – Corrosion resistant

OPTIONS – Isolating gate valve (recommended)

VALVE TYPE

WEIGHT kg

CODE

DN50

TTF/AV50RFP

DN80/100

TTF/AV80RFP

DN150

TTF/AV150RFP

DN200

TTF/AV200RFP

DELIVERY STATUS

DN: Nominal Diameter.

SCAN TO SHOP ONLINE

ttpumps.com 168

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves CLEAN WATER AIR VALVE ONE FUNCTION

Single small orifice air valve for efficient air release. Automatically releases air pockets accumulated at critical points of pressurised pipelines, such as high points and changes in slope, while avoiding unwanted head loss and reduction in flow through the system. Suitable for potable and filtered water applications.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Standard: BSP EN 1074-4 – Inlet: 1” BSP (female threaded) – Maximum working pressure: 16 bar (25/40 bar on request) – Minimum working pressure: 0.1 bar – Temperature range: -10°C to 60°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Stainless steel float – Lightweight ductile iron construction – Stainless steel fasteners – Seat over compression protection – WRAS listed materials

– Compact design – Reliable operation – Excellent performance – Corrosion resistant

OPTIONS – Isolating valve (recommended) – Flanged inlet – 25 bar and 40 bar variants available – Reinforced stainless steel float PERFORMANCE DATA

40 35 AIR RELEASE DURING WORKING CONDITIONS

30 B – Ø1.1mm

bar

25 20 15

A – Ø1.7mm

10 5 0

Q / l/sec

VALVE TYPE

CURVE

WEIGHT kg

CODE

1” BSP PN16

2.8

TTF/AV1F25

1” BSP PN40

2.8

DELIVERY STATUS

SCAN TO SHOP ONLINE

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 169

WATERWORKS VALVES - 9

Air Valves

Waterworks Valves WATERWORKS VALVES - 9

Air Valves

ANTI-SURGE CLEAN WATER AIR VALVE

Lightweight single chamber double orifice air valve with four functions: – Efficient release of gas to prevent pressure build-up – Ingress of gas to prevent vacuum in the pipe system – Controlled bleed of gas to maintain stability – Rapid fill technology to avoid slam Suitable for potable and filtered water applications.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Standard: BS EN 1074-4 – Inlet: 1” BSP to DN300 – Maximum working pressure: 16 bar (25 & 40 bar on request) – Minimum working pressure: 0.2 bar – Hydrostatic pressure tests: Seat - 1.1 x PN (17.6 bar) Body - 1.5 x PN (24.0 bar) – Temperature range: -10°C to 60°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Directly acting float mechanism – Lightweight compact single chamber design – Patented small orifice configuration – Excellent flow capacity – Drain valve – Corrosion resistant construction – WRAS approved

– Innovative design – Robust design – Excellent performance – Corrosion resistant

VALVE TYPE

OPTIONS – Tapped cowl for submerged duty – Discharge (exit only) kit – Air entrance (ingress only) kit – Anti shock system to prevent water hammer – Isolation valve

1” BSP

WEIGHT kg 3

CODE TTF/AV3F25

2” BSP

DN50

TTF/AV3F50

DN80

TTF/AV3F80

DN100

TTF/AV3F100

DN150

TTF/AV3F150

DELIVERY STATUS

DN: Nominal Diameter.

SCAN TO SHOP ONLINE

Please note: Additional information required / bespoke built item, contact us for more information

ttpumps.com 170

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves ANTI SLAM CLEAN WATER AIR VALVE

Saferise® is a double orifice air valve with an integral engineered surge anticipation and alleviation mechanism. It is designed to overcome potentially damaging effects of hydraulic surges associated with water boosting systems in high-rise buildings, vacuum prevention on pump failure and column separation. Saferise® allows the efficient intake of bulk air during the draining cycle while accurately controlling the discharge speed during the charging cycle.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Standard: BSP EN 1074-4:2000 – Inlet: 1” BSP to DN200 – Flanges & drillings: BS EN 10922:1987 table 9 (PN16) – Alternatives: BS EN 1092-2:1987 table 10 (PN25) BS EN 10922:1987 table 11 (PN40) – Maximum working pressure: 16 bar (25/40 bar on request) – Minimum working pressure: 0.3 bar – Hydrostatic pressure tests: Seat - 1.1 x PN Body - 1.5 x PN – Temperature range: -10°C to 60°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Patented proven engineered design – Metallic integral surge alleviation mechanism – Directly-acting precision-machined solid floats – Robust lightweight ductile iron body – Corrosion resistant construction – Excellent flow capacity – WRAS approved

– Innovative design – Reliable design – Excellent performance – Quality engineered

OPTIONS – Higher pressure version (PN25, PN40 & PN64) – Insect mesh – Associated components (isolation valve and filter)

PERFORMANCE DATA

1.0

AIR ENTRANCE DURING PIPE DRAINING

0.9

bar

0.8 0.7 0.6 A B 0.5

C 1000

D 2000

E 3000

4000

5000

6000

m3/h

VALVE TYPE

CURVE

WEIGHT kg

CODE

1” BSP

TTF/AV3F25AS

DN50

TTF/AV3F50AS

DN80

TTF/AV3F80AS

DN100

TTF/AV3F100AS

DN150

TTF/AV3F150AS

DN200

TTF/AV3F200AS

DELIVERY STATUS

DN: Nominal Diameter.

SCAN TO SHOP ONLINE

Please note: Additional information required / bespoke built item, contact us for more information

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 171

WATERWORKS VALVES - 9

Air Valves

Waterworks Valves PLASTIC COMBINATION AIR VALVE

Combination, three function, automatic air valve for the efficient management of air in potable, irrigation and treated water applications. – Efficient release of gas to prevent pressure build-up – Ingress of gas to prevent vacuum as media leaves system – Controlled bleed of gas to maintain system stability

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Standard: BS EN 1074-4 – Inlet: 1” BSP to 2” BSP – Maximum working pressure: 16 bar – Minimum working pressure: 0.2 bar – Temperature range: 60°C maximum, insulate at 0°C and below

– Lightweight single chamber design with internal float guides – Aerodynamic full-bore body prevents premature closure at higher air velocity – Dynamic sealing prevents leakage under low pressure conditions – Variants include; exit only, entrance only and anti-shock mechanism – BSP male thread inlet connection – Compact, corrosion resistant and low maintenance – DM174 approval for potable water use

– Innovative design – Lightweight design – Excellent performance – Easy to use

AIR RELEASE DURING WORKING CONDITIONS

1.4

1.3 1.2

1.1

bar

B AIR DISCHARGE DURING PIPE FILLING 0

100

200

300

400

500

AIR ENTRANCE DURING PIPE DRAINING

0.9

0.8

0.7

2 0

PERFORMANCE DATA

1.5

PERFORMANCE DATA

p (bar)

WATERWORKS VALVES - 9

Air Valves

0.6

100

150

0.5

100

Q (Nm3/h)

VALVE TYPE

CURVE

A 200

300

400

500

m3/h

WEIGHT kg

CODE

1”

0.3

TTF/AV3F25P

2”

0.75

TTF/AV3F50P

DELIVERY STATUS

SCAN TO SHOP ONLINE

ttpumps.com 172

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves FAST ACTING RELIEF VALVE

This fast acting, surge prevention, pressure relief valve has been designed to avoid the damaging effects of water hammer in pipeline networks. It is designed to prevent pressure from rising above a pre-set value, through its capacity to discharge an excessive volume of water through its flanged outlet.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Standard: EN 1074/5 – Inlet: ½” BSP to 1” BSP – Inlet: DN50/65 to DN150 – Flanges & drillings: BS EN 10922:1987 table 9 (PN16) – Various spring ranges available – Alternatives: BS EN 1092-2:1987 table 10 (PN25) – Maximum working pressure: 25 bar – Hydrostatic pressure tests: Seat - 1.1 x PN Body - 1.5 x PN – Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Robust and compact design suitable for clean, treated and raw water and to reduce blow-back – Negligible inertia of the internal moving parts ensuring the absence of friction and long lasting performance – Perfect water tightness and excellent cavitation resistance and harsh working conditions due to floating obturator technology and the use of various gaskets and corrosion resistant stainless steel grades – Fast and accurate response without any hysteresis effect thanks to high frequency annealed springs – Wide selection of spring ranges available – Flanged outlet which allows to direct the water outflow through a discharge pipe

– Innovative design – Excellent performance – Corrosion resistant – Robust design

SCAN TO SHOP ONLINE

PRESSURE RELIEF WITH THREADED CONNECTION

PRESSURE RELIEF WITH FLANGED OUTLET DELIVERY STATUS

VALVE TYPE

CODE

SETTING PRESSURE bar

WEIGHT kg

DN ½”

TTF/FAR1408

1-8

2.3

DN ½”

TTF/FAR1416

2-16

2.3

DN ½”

TTF/FAR1424

4-24

2.3

DN1”

TTF/FAR2508

1-8

2.3

DN1”

TTF/FAR2516

2-16

2.3

DN1”

TTF/FAR2524

4-24

2.3

DN50/65

TTF/FAR0501608

1-8

DN50/65

TTF/FAR0501616

8-16

DN80

TTF/FAR0801608

1-8

DN80

TTF/FAR0801616

8-16

DN100

TTF/FAR1001608

1-8

DN100

TTF/FAR1001616

8-16

DN150

TTF/FAR1501608

1-8

111

DN150

TTF/FAR1501616

8-16

111

DN: Nominal Diameter.

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 173

WATERWORKS VALVES - 9

Control Valves

Waterworks Valves WATERWORKS VALVES - 9

Control Valves

PRESSURE REDUCING VALVE

An accurate and reliable directly-acting pressure reducing valve used to maintain a pre-set downstream pressure regardless of flow rate and upstream pressure fluctuations. Suitable for domestic, commercial and industrial applications involving potable water, oil or air.

MATERIALS – Range: DN50 - DN150 – Adjustable downstream pressure: 1 ½ - 6 bar, 5 - 12 bar or 12 - 24 bar – Maximum upstream pressure: 40 bar – Minimum dynamic differential pressure: 1 bar – Flanged: EN1092 table (PN16) – Face to face: EN5N558 series 1 – Maximum temperature: 70°C – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

BENEFITS

– Hydrostatic pressure tests: Seat - 1.1 x PN Body - 1.5 x PN

– Innovative design – Easy to adjust and maintain – Excellent performance – Corrosion resistant

FEATURES – Patented self cleaning piston – Proven engineered balanced design – Robust ductile construction – Stainless steel internal components – Tapped upstream and downstream bosses – WRAS approved

VALVE TYPE

WEIGHT kg 12 19 24 34 56 74

DN50 SPRING 1 ½ – 6 BAR DN65 SPRING 1 ½ – 6 BAR DN80 SPRING 1 ½ – 6 BAR DN100 SPRING 1 ½ – 6 BAR DN125 SPRING 1 ½ – 6 BAR DN150 SPRING 1 ½ – 6 BAR

OPTIONS – Inline strainer – Isolation valve – Pressure gauge

CODE

DELIVERY STATUS

TTF/PRV50/6 TTF/PRV65/6 TTF/PRV80/6 TTF/PRV100/6 TTF/PRV125/6 TTF/PRV150/6

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

EQUILIBRIUM BALL FLOAT VALVE

Equilibrium ball float valve with multiple discharge ports used to automatically regulate and control the filling of tanks and reservoirs to a predetermined level. Suitable for clean and potable water duties.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Range: DN50 - DN300 – Flanges & drillings: BS EN 1092-2:1987 table 9 (PN16) – Maximum working pressure: 16 bar – Temperature range: -10°C to 70°C, insulate at 0°C and below – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Unique lightweight ductile iron design – Balanced seat for optimal efficiency – Versatile T-ported flanged body – Stainless steel internals and float for corrosion resistance – Long float arm for accurate and reliable operation – Float arm can be off-set by 45° as to avoid obstacles – WRAS approved

– Innovative design – Excellent performance – Corrosion resistant – Robust design

VALVE TYPE DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300

WEIGHT kg 21 36 33 41 49 79 118 138 250

OPTIONS – Alternative internal materials – Anti-freezing device – Alternative flange drillings

CODE TTF/FV50 TTF/FV65 TTF/FV80 TTF/FV100 TTF/FV125 TTF/FV150 TTF/FV200 TTF/FV250 TTF/FV300

DELIVERY STATUS

SCAN TO SHOP ONLINE

DN: Nominal Diameter.

ttpumps.com 174

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves BRASS GATE VALVE

Metal seat wedge gate valve used for pipeline isolation. Suitable for nonaggressive, non-corrosive and non-abrasive media up to 100°C.

MATERIALS

FEATURES

BENEFITS

– Body: Brass CW617N / CC754S – Bonnet: Brass CW617N – Wedge: Brass CW617N – Hexagonal nut: Brass CW614N – Stem: Brass CW614N – Bonnet washer: Fibre – Stem seal: EPDM

– Threaded female BSP parallel – Solid wedge design – Non-rising stem – 100% full bore – Screwed bonnet – Handwheel operated

– Lightweight design – Easy to install – Easy to operate

VALVE TYPE

WEIGHT kg

CODE

½” BSP PN16

0.20

VI/156/14

/4” BSP PN16

0.28

VI/156/20

1” BSP PN16

0.42

VI/156/25

1 ¼” BSP PN16

0.60

VI/156/32

1 ½” BSP PN16

0.76

VI/156/40

2” BSP PN16

1.23

VI/156/50

2 ½” BSP PN16

1.97

VI/156/65

3” BSP PN16

2.56

VI/156/80

4” BSP PN16

4.62

VI/156/100

WATERWORKS VALVES - 9

Brass Valves

DELIVERY STATUS

SCAN TO SHOP ONLINE

BRASS BALL VALVE

Two piece ball valve with PTFE seat used for pipeline isolation. Suitable for many industrial and domestic applications up to 150°C.

MATERIALS

FEATURES

BENEFITS

– Body: Nickel plated brass CW17N – Ball: Chrome plated brass CW617N – Stem: Chrome plated brass CW614N – Seal: PTFE – Washers: NBR

– Threaded female BSP parallel – Anti-blow out stem design – Chrome plated brass ball – ‘Bubble-tight’ seal – 100% full bore – Durable PTFE seat – Lever operated

– Excellent performance – Corrosion resistant – Easy to install – Easy to operate

VALVE TYPE

WEIGHT kg

CODE

½” BSP PN40

0.178

VI/90-14

/4” BSP PN40

0.296

VI/90-20

1” BSP PN40

0.423

VI/90-25

1 ¼” BSP PN30

0.664

VI/90-32

1 ½” BSP PN30

0.983

VI/90-40

2” BSP PN25

1.58

VI/90-50

2 ½” BSP PN18

3.5

VI/90-65

3” BSP PN16

5.45

VI/90-80

4” BSP PN14

8.775

VI/90-100

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 175

Waterworks Valves WATERWORKS VALVES - 9

Brass Valves

BRASS SPRING CHECK VALVE

Two piece spring return check valve used to prevent reverse flow. Suitable for many industrial and domestic applications up to 100°C.

MATERIALS

FEATURES

BENEFITS

– Body: Copper alloy CW617N – Seat: NBR – Seal assembly: Nylon 6 – Spring: Stainless steel AISI 302

– Threaded BSP parallel – Spring assisted – Resilient seat – Optional stainless steel strainer – Suitable for both horizontal and vertical installation

– Lightweight – Reliable performance – Corrosion resistant – Easy to install

VALVE TYPE

WEIGHT kg

½” BSP PN12

0.137

VI/103-14

/4” BSP PN12

0.21

VI/103-20

CODE

1” BSP PN12

0.28

VI/103-25

1 ¼” BSP PN10

0.407

VI/103-32

1 ½” BSP PN10

0.608

VI/103-40

2” BSP PN10

0.845

VI/103-50

2 ½” BSP PN8

1.404

VI/103-65

3” BSP PN8

2.1

VI/103-80

4” BSP PN8

2.5

VI/103-100

DELIVERY STATUS

SCAN TO SHOP ONLINE

BRASS SPRING CHECK VALVE C/W STRAINER

Two piece spring check valve used to prevent reverse flow. Strainer fitted to minimise debris entering the pipe system. Suitable for many industrial and domestic applications up to 100°C.

MATERIALS

FEATURES

BENEFITS

– Body: Copper alloy CW617N – Seat: NBR – Seal assembly: Nylon 6 – Spring: Stainless steel AISI 302 – Strainer: Stainless steel AISI 302

– Threaded BSP parallel – Spring assisted – Resilient seat – Stainless steel strainer – Suitable for both horizontal and vertical installation

– Lightweight – Reliable performance – Corrosion resistant – Easy to install

VALVE TYPE

WEIGHT kg

½” BSP PN12

0.096

VI/108-14

/4” BSP PN12

0.141

VI/108-20

1” BSP PN12

0.205

VI/108-25

1 ¼” BSP PN10

0.301

VI/108-32

1 ½” BSP PN10

0.444

VI/1083-40

2” BSP PN10

0.625

VI/108-50

2 ½” BSP PN8

1.1

VI/108-65

3” BSP PN8

1.65

VI/108-80

4” BSP PN8

2.465

VI/108-100

ttpumps.com 176

CODE

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

SCAN TO SHOP ONLINE

Lead time may apply.

Waterworks Valves BRASS SWING CHECK VALVE

Swing check valve used to prevent reverse flow. Suitable for many industrial and domestic applications up to 100°C.

MATERIALS

FEATURES

BENEFITS

– Body: Brass CW617N – Inspection cover: Brass CW617N – Disc: Brass CW617N – Washers: Fibre

– Screwed female BSP parallel – Metal seat – Screwed inspection cover – Free hanging disc – Suitable for both horizontal and vertical installation

– Lightweight – Reliable performance – Corrosion resistant – Easy to install

SCAN TO SHOP ONLINE

VALVE TYPE

WEIGHT kg

CODE

½” BSP PN12

0.171

VI/130-14

/4” BSP PN12

0.272

VI/130-20

1” BSP PN12

0.416

VI/130-25

1 ¼” BSP PN10

0.632

VI/130-32

1 ½” BSP PN10

0.804

VI/130-40

2” BSP PN10

1.124

VI/130-50

2 ½” BSP PN8

2.02

VI/130-65

3” BSP PN8

2.87

VI/130-80

4” BSP PN8

5.3

VI/130-100

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 177

WATERWORKS VALVES - 9

Brass Valves

Waterworks Valves WATERWORKS VALVES - 9

Valve Accessories

BEVEL GEARBOX (SMALL)

Reliable reduction bevel gearbox designed for long-life operation. Prepared to suit non-rising multi-turn valves such as gate, globe or penstock valves.

TECHNICAL SPECIFICATION – Torque range 360 to 700Nm (265 to 545 lbf) – Output configuration: IS05210 – Ingress protection: IP65 – Maximum temperature: 120 – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

FEATURES

BENEFITS

– Proven engineered design – Gears supported by tapered roller bearings – Removable pinion shaft – Grease filled for long-life – Range of gearing ratios – Robust ductile iron housing – Operation: handwheel or tapered cap

– Designed for reliability and long life – Corrosion resistant construction – Robust design – Compact and lightweight

OPTIONS – BS5163 tapered stem cap – Handwheel (lockable on request) – Chainwheel

GEARBOX TYPE

RATIO

WEIGHT kg

CODE

GBF10

2:1

6.5

TTF/GBF10

GBF14

3:1

TTF/GBF14

DELIVERY STATUS SCAN TO SHOP ONLINE

BEVEL GEARBOX (MEDIUM)

Reliable reduction bevel gearbox designed for long-life operation that can be manually operated or motor driven. Prepared to suit non-rising multi-turn valves such as gate, globe or penstock valves.

TECHNICAL SPECIFICATION

FEATURES

BENEFITS

– Maximum output torque: 3200Nm – Input & output configuration: ISO5210 – Ingress protection: IP67 – Maximum temperature: 120°C – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– Proven engineered design – Gears supported by tapered roller bearings – Removable pinion shaft – Grease filled for long life – Range of gearing ratios – Robust ductile iron housing – Input prepared for actuation

– Designed for reliability and long life – Corrosion resistant construction – Easy to actuate – Robust design – Acceptance of rising spindle and stem protection tube – BS5163 tapered stem cap – Handwheel (lockable on request) – Electrical actuation – IP68 on request – Secondary reversing spur gearbox

GEARBOX TYPE

RATIO

GBF16

4:1

TTF/GBF16

GBF25

4:1

103

TTF/GBF25

ttpumps.com 178

OPTIONS

WEIGHT kg

+44 (0) 1630 647200

CODE

Same day dispatch.

DELIVERY STATUS SCAN TO SHOP ONLINE

Lead time may apply.

Waterworks Valves SPUR GEARBOX

Reliable reduction spur gearbox designed for long-life operation that can be either operated manually or motor driven. Prepared to suit non-rising multi-turn valves such as gate, globe or penstock valves.

TECHNICAL SPECIFICATION

FEATURES

OPTIONS

– Maximum output torque: 7200Mm – Input & output configuration: ISO5210 – Ingress protection: IP67 – Spring: Stainless steel AISI 302 – Maximum temperature: 120°C – Coating: Blue fusion bonded epoxy (>300µ and WRAS listed)

– BS5163 tapered stem cap – Handwheel (lockable on request) – Electrical actuation – IP68 on request – Secondary reversing spur gearbox

GEARBOX TYPE

CODE

RATIO

WEIGHT kg

SGB1 F14/F10

TTF/SGB1

4:1

SGB2 F16/F10

TTF/SGB2

8:1

SGB2 F16/F14

TTF/GBSF16

4:1

SGB3 F25/F10

TTF/SGB3

16:1

SGB3 F25/F14

TTF/SGB3

8:1

SGB3 F25/F14

TTF/GBSF25

4:1

SGB4 F30/F14

TTF/SGB4

16:1

122

SGB4 F30/F14

TTF/SGB4

8:1

120

SGB1 F40/F14

TTF/SGB5

16:1

265

SGB1 F40/F16

TTF/SGB5

8:1

260

WATERWORKS VALVES - 9

Valve Accessories

DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: Additional information required / bespoke built item, contact us for more information

REVERSING SPUR GEARBOX

Reliable reversing reduction spur gearbox designed for long-life operation that can be either operated manually or motor driven. Engineered to reverse the output direction regardless of the input direction. Prepared to suit non-rising multi-turn valves such as gate, globe or penstock valves.

TECHNICAL SPECIFICATION

FEATURES

OPTIONS

– Maximum output torque: 1900Nm – Input & output configuration: ISO5210 – Ingress protection: IP67 – Maximum temperature: 120°C

– BS5163 tapered stem cap – Handwheel (lockable on request) – Electrical actuation – IP68 on request

GEARBOX TYPE

CODE

RGB F14/F14

TTF/GBRSF14

2:1

RGB F16/F14

TTF/GBRSF16

4:1

RGB F25/F14

TTF/GBRSF25

4:1

Same day dispatch.

Lead time may apply.

RATIO

WEIGHT kg

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 179

Waterworks Valves WATERWORKS VALVES - 9

Valve Accessories

VALVE OPERATING EQUIPMENT

SIZE mm

EXTENSION SPINDLE DN50 - DN300

EXTENSION SPINDLE DN350 - DN600

T-KEY DN50 - DN300

T-KEY DN350 - DN600

TTF/EXT1000 4kg

TTF/EXT1000-L 7kg

TTF/TEE-KEYX1M

TTF/TEE-KEYX1M-L

TTF/EXT2000 6.5kg

TTF/EXT2000-L 9.5kg

ON REQUEST

TTF/EXT3000 9kg

TTF/EXT3000-L 12kg

TTF/EXT4000 12kg

TTF/EXT4000-L 15kg

TTF/EXT5000 14.5kg

TTF/EXT5000-L 17.5kg

TTF/EXT6000 17kg

TTF/EXT6000-L 20kg

EXTRA FOR HANDWHEEL

10kg

(UP TO) 10kg

UNIVERSAL JOINTS (PAIR)

TTF/UNIJOINT26 & AQ/GAITER35 1kg

TTF/UNIJOINT26 & TTF/GAITER35 1kg

300 - 1000mm (ONE PIECE)

1001 - 2000mm (ONE PIECE)

2001 - 3000mm (ONE PIECE) 3001 - 4000mm (TWO PIECE)

4001 - 5000mm (TWO PIECE)

5001 - 6000mm (TWO PIECE)

Please note: Larger sizes available on request.

ttpumps.com 180

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves VALVE OPERATING EQUIPMENT

SIZE mm

ADJUSTABLE OUTREACH SUPPORT BRACKET

80 - 300mm

80 - 700mm

VERTICAL OUTREACH BRACKET

FLOOR MOUNTED PEDESTAL

SURFACE BOX

TTF/OR80-300 2.5kg

TTF/OR80-700 3kg

800mm C/W F10 PAD

TTF/HEADSTOCK 12kg

800mm C/W F14 PAD

TTF/HEADSTOCKF14 12kg

150 - 150mm

500mm

1000mm

ZU/150X150X104

TTF/0RV500 -

TTF/0RV1000

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 181

WATERWORKS VALVES - 9

Valve Accessories

Waterworks Valves WATERWORKS VALVES - 9

Valve Accessories

DUCTILE IRON PIPES AND FITTINGS

We supply a range of ductile iron pipes and fittings for both potable and wastewater from DN80 to DN2000. Below is a summary of popular double-flanged wastewater fittings to EN598 and flanged to EN1092 Table 9 (PN16). Please enquire with our sales department for larger sizes and custom solutions. SIZE mm

FABRICATE PIPE

DN80

DN100

90° SHORT RADIUS BEND

90° LONG RADIUS BEND

DUCKFOOT BEND

EQUAL TEE

RADIAL TEE

ZU/90LRBX80

ZU/90LRX80

ZU/90SRDFBX80

ZU/TX80

ZU/RTX80

ZU/90SRBX100

ZU/90LRBX100

ZU/90SRDFBX100

ZU/TX100

ZU/RTX100

ZU/90SRBX150

ZU/90LRBX150

ZU/90SRDFBX150

ZU/TX150

ZU/RTX150

DN150

DN200

DN250

DN300

DN80/100

DN100/150

Please note: Larger sizes available on request.

ttpumps.com 182

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Waterworks Valves DUCTILE IRON PIPES AND FITTINGS

SIZE mm

CONCENTRIC TAPER

ECCENTRIC (FLAT) TAPER

DN80

DN100

DN150

DN200

DN250

DN300

STRAIGHT COUPLING

FLANGE ADAPTOR

JOINT SET (GMS)

ZU/VJC80

ZU/VJFA-80XNP16

TT/80JSMSG

ZU/VJC118

ZU/VJFA-118XNP16

TT/100JSMSG

ZU/VJC150

ZU/VJFA-150XNP16

TT/150JSMSG

ZU/DFT100X80

ZU/F100080DFFTC -

TT/200JSMSG

TT/250JSMSG

TT/300JSMSG

DN80/100

ZU/DFT150X100

ZU/F150100DFFTC

DN100/150

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 183

WATERWORKS VALVES - 9

Valve Accessories

Notes

ttpumps.com 184

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Control Systems

SECTION 10 CONTROL SYSTEMS

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 185

CONTROL SYSTEMS - 10

Control Systems FLOAT SWITCH - ECONOMY

ECONOMY FLO103 DIFFERENTIAL FLOAT SWITCH The FLO103 is our economy option float switch, ideal for general purpose use. Constructed from a polypropylene housing moulded to a 3 core synthetic rubber cable, containing an internal micro switch and rolling ball operator.

FEATURES

– Durable polypropylene construction – Tested and certified to withstand over 3 bar pressures – Change over switch suitable for both filling and emptying use or alarm applications

BENEFITS

– Simple cost effective level control – Suitable for both filling and emptying applications – Easy to maintain – Built for reliability – Robust build – Rubber cable resistant to hydrocarbons

PUMP TYPE

CODE

PACKAGING DIMENSIONS h x w x d mm

WEIGHT kg

ECONOMY FLO103 FLOAT SWITCH 10m CABLE

TTC/FLO103-10M

300 x 300 x 100

1.50 ± 5%

ECONOMY FLO103 FLOAT SWITCH 20m CABLE

TTC/FLO103-20M

300 x 300 x 100

2.80 ± 5%

ECONOMY FLO103 FLOAT SWITCH 30m CABLE

TTC/FLO103-30M

300 x 300 x 200

3.80 ± 5%

ECONOMY FLO103 FLOAT SWITCH 40m CABLE

TTC/FLO103-40M

300 x 300 x 200

4.90 ± 5%

ECONOMY FLO103 FLOAT SWITCH 50m CABLE

TTC/FLO103-50M

300 x 300 x 200

5.25 ± 5%

DELIVERY STATUS

SCAN TO SHOP ONLINE

READY LEVEL

Ready Level is a reliable method of fixing level control floats in a pump chamber or sump to avoid tampering or alteration of levels once set on commissioning. The Ready Level is purchased as a set of parts, comprising of stainless steel chain, D shackles, heavy-duty powder coated weight, galvanised upper bracket D hook and stainless steel karabiner - or with additional float switches as a complete prefabricated assembly (if level settings are supplied to us at order stage).

UPPER D BRACKET AND KARABINER

Available in 2m, 3m, 5m and 8m options.

BENEFITS

– British design and manufacture – Superior performance – Offers stability in turbulent wet wells

READY LEVEL WEIGHT

TYPE

PRODUCT CODE

DIMENSIONS m

WEIGHT kg

READY LEVEL x2

TTC/READYLEVEL2M

2.2

READY LEVEL x3

TTC/READYLEVEL3M

2.4

READY LEVEL x5

TTC/READYLEVEL5M

2.6

READY LEVEL x8

TTC/READYLEVEL8M

DELIVERY STATUS

SCAN TO SHOP ONLINE

Please note: Float switches not included.

ttpumps.com 186

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

FLOAT SWITCHES

Float Switches are economic and efficient liquid level sensors, simple to install and designed for trouble-free operation over a long life.

FLO101

– FLO101 - ATEX / IECEX approved for 0 zone related areas – FLO102 - General purpose use – FLO106 - For use in diesel oil – FLO107 - WRAS approved materials for clean / potable water application

FLO102

CONTROL SYSTEMS - 10

Control Systems

FEATURES

– Change over switch for filling and emptying applications or alarm

FLO106

BENEFITS

– British design and manufacture – Easy to maintain – Good reliability – Easy to install

FLO107

PACKING DIMENSIONS h x w x d mm

TYPE

WEIGHT kg

CODE

DELIVERY STATUS

FLO101 FLOAT SWITCH 10m CABLE ATEX / IECEX

300 x 300 x 100

1.25 ± 5%

TTC/FLO101-10M

FLO101 FLOAT SWITCH 20m CABLE ATEX / IECEX

300 x 300 x 100

2.05 ± 5%

TTC/FLO101-20M

FLO101 FLOAT SWITCH 30m CABLE ATEX / IECEX

300 x 300 x 200

3.05 ± 5%

TTC/FLO101-30M

FLO101 FLOAT SWITCH 40m CABLE ATEX / IECEX

300 x 300 x 200

4.5 ± 5%

TTC/FLO101-40M

GENERAL FLO102 FLOAT SWITCH 10m CABLE

300 x 300 x 100

1.25 ± 5%

TTC/FLO102-10M

GENERAL FLO102 FLOAT SWITCH 20m CABLE

300 x 300 x 100

2.00 ± 5%

TTC/FLO102-20M

GENERAL FLO102 FLOAT SWITCH 30m CABLE

300 x 300 x 200

3.00 ± 5%

TTC/FLO102-30M

GENERAL FLO102 FLOAT SWITCH 40m CABLE

300 x 300 x 200

3.65 ± 5%

TTC/FLO102-40M

FUEL FLO106 FLOAT SWITCH 10m CABLE

300 x 300 x 100

1.10 ± 5%

TTC/FLO106-10M

FUEL FLO106 FLOAT SWITCH 20m CABLE

300 x 300 x 100

1.65 ± 5%

TTC/FLO106-20M

FUEL FLO106 FLOAT SWITCH 30m CABLE

300 x 300 x 200

2.60 ± 5%

TTC/FLO106-30M

FUEL FLO106 FLOAT SWITCH 40m CABLE

300 x 300 x 200

3.05 ± 5%

TTC/FLO106-40M

POTABLE FLO107 FLOAT SWITCH 10m CABLE WRAS

300 x 300 x 100

1.45 ± 5%

TTC/FLO107-10M

POTABLE FLO107 FLOAT SWITCH 20m CABLE WRAS

300 x 300 x 100

2.25 ± 5%

TTC/FLO107-20M

POTABLE FLO107 FLOAT SWITCH 30m CABLE WRAS

300 x 300 x 200

3.20 ± 5%

TTC/FLO107-30M

POTABLE FLO107 FLOAT SWITCH 40m CABLE WRAS

300 x 300 x 200

4.10 ± 5%

TTC/FLO107-40M

SCAN TO SHOP ONLINE

COUNTERWEIGHTS

Offering an optional stabilising weight that can be fixed at any point on the cable, a counterweight controls the differential switching point of the float. Dependent on your application and the specific requirements of operation, we can supply the appropriate counterweight.

FLOAT TYPE

COUNTERWEIGHT COMPATIBILITY FLOCW-1 CHART

FLO 102 FLO 103 FLO 106

COUNTER COUNTER WEIGHT 1 WEIGHT 2 TYPE

COUNTERWEIGHT FLOCW-2 FLOCW-3

FLOCW-4

FLOCW-5

FLO 107

Same day dispatch.

X X

Lead time may apply.

DIMENSIONS WEIGHT h x w x d mm kg

COUNTER COUNTER WEIGHT 4 WEIGHT 5 CODE

COUNTERWEIGHT 1

60 x 50 x 50

0.25

TTC/FLOCW-1

COUNTERWEIGHT 2

80 x 50 x 50

0.25

TTC/FLOCW-2

COUNTERWEIGHT 3

82 x 68 x 20

0.25

TTC/FLOCW-3

COUNTERWEIGHT 4

72 x 45 x 45

0.35

TTC/FLOCW-4

COUNTERWEIGHT 5

60 x 50 x 50

0.25

TTC/FLOCW-5

X X X X

COUNTER WEIGHT 3

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 187

CONTROL SYSTEMS - 10

Control Systems WATERGUARD / WATERGUARD PRO

The WaterGuard range offers cost effective 1Ph pump control with a wealth of user friendly features particularly suited to removing nuisance water and keeping vulnerable areas dry. The WaterGuard incorporates mains healthy indication and the ability to be used for filling or emptying applications whilst controlling a 1Ph 230V motor directly up to 9.3 Amp FLC. Ideal for basements where water should not be present. Level detection can be via our WaterVole, PumpVole, Float switch or conductivity probes.

FEATURES

– PCB design – Run on timer for use with residue pumps – Adjustable sensitivity on conductivity circuit – Compact weatherproof enclosure, IP66 rating – Can control single phase motors up to 9.3 Amp FLC – High-level audible alarm with mute configurable for continuous or intermittent use (WaterGuard Pro) – LED indication for mains healthy and pump running / relay active – Dual voltage input 230V / 110V 1Ph – Watervole supplied with 10m cable as standard, longer lengths available on request – Volt free contacts available for remote monitoring – High level on WaterGuard Pro / WaterVole Pro – “Test” button facility TYPE

CODE

VOLTAGE

WATERGUARD / WATERGUARD PRO PUDDLEPAL

WATERGUARD

TTC/WGUARD

230V / 110V 1Ph

DIMENSIONS h x w x d mm 130 x 145 x 60

WEIGHT kg 0.6

WATERGUARD PRO

TTC/WGUARDPRO

230V / 110V 1Ph

130 x 145 x 60

0.6

24V BEACON

MAX/X80-02

WATERVOLE

DELIVERY STATUS SCAN TO SHOP ONLINE

Please note: See our Float switch range. (Pages 186 - 187)

WATERVOLE & PUMPVOLE

The WaterVole and PumpVole range offer compact level sensors, ideal for small confined sumps and tight spaces where floats are not suitable. Each unit comprises stainless steel fixed conductivity detection probes housed in a fully sealed resin-filled enclosure fitted with a 10m rubber cable. The WaterVole range of sensors achieves differential in water heights by the chosen mounting orientation of the level sensor, either horizontally or upright in position. The WaterVole is capable of start/stop levels and the WaterVole Pro is capable of providing start/stop/high level, when used with suitable controllers such as the WaterGuard & WaterGuard Pro and Libra Micro Controller Range. The PumpVole is intended for use mounted on a submersible pump body, providing adjustable height level control by the integral Stainless Steel bracket, again operating in conjunction with either our WaterGuard or Libra Micro Controller range.

FEATURES

– Compact design – Easy installation – Rubber cable resistant to Hydro carbons – Stainless Steel level probes and base plate TYPE

188

PUMPVOLE LEVEL CONTROLLER

Please note: The WaterVole range and PumpVole can only be purchased with the WaterGuard/WaterGuard Pro and Libra Micro Controller range

WATERVOLE

TTC/WVOLEST

DIMENSIONS h x w x d mm 50 x 70 x 110

WATERVOLE PRO PUMPVOLE

TTC/WVOLESTPR TT/PUMPVOLE

50 x 70 x 110 80 x 40 x 20

ttpumps.com

CODE

WATERVOLE LEVEL CONTROLLER

+44 (0) 1630 647200

WEIGHT kg 1.2 1.2 1.0

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

Control Systems ALERT / ALERT PRO

Particularly suitable for use as a high or low level warning alarm, the Alert and Alert Pro monitor the status of a volt free contact such as a float, pressure switch, intruder contact etc, and provide visual and audible warning indication.

FEATURES

ALERT / ALERT PRO

– Compact weatherproof enclosure, IP66 rating – Push-button test facility – Audible alarm with mute facility – Mains power-on indicator – Battery backup options – Volt free repeater contact on Alert Pro units – 12Vdc beacon supply

ALARM SIGNAL SOUND

LIGHT

HIGH LEVEL

SUPPLY

BENEFITS

– Local visual & audible alarm – Compact design for small spaces – Easy to install – Remote alarm notification on ‘pro’ version – Power healthy indication

LEVEL CONTROL

TYPE

VOLTAGE

DIMENSIONS h x w x d mm

WEIGHT kg

CODE

DELIVERY STATUS

ALERT (MAINS POWERED)

230V

100 x 100 x 60

0.32

TTC/ALERT-MAINS

ALERT (MAINS WITH BATTERY BACK UP)

230V

100 x 100 x 60

1.00

TTC/ALERTBATTERY

ALERT PRO (MAINS POWERED)

230V

100 x 100 x 60

0.32

TTC/ALERTPROMAIN

ALERT PRO (MAINS WITH BATTERY BACK UP)

230V

100 x 100 x 60

1.00

TTC/ALERTPRO-BATT

BEACON (LED TYPE FOR ALERT)

12VDC

0.3

TTC/ALERTBEACON

SCAN TO SHOP ONLINE

C The RainCycle® Controller range of panels offers a simple control solution within water harvesting applications. Designed for use with a 230V / 1Ph pump, these units provide storage tank level monitoring as standard with the use of floats to detect and indicate water available, top up required and no water conditions. For systems where harvested water requires topping up with mains water, we have a range of solutions including our additional Top-Up Box consisting of a small and compact enclosure. The RainCycle® Level version is an ideal solution where applications require a more accurate level indication.

FEATURES

– PCB design – Compact weatherproof enclosure, IP66 rating – Status indication for power on, pump running, water available / mains water top-up valve, water low & no water – Functional test buttons for pump & alarm – Additional LED level display via level transducer – 24VDC solenoid supply TYPE

CODE

STANDARD*

TTC/RCS

TOP-UP*

TTC/RCT

LEVEL*

TTC/RCL

BENEFITS

– British design and manufacture – Designed for reliability and long life – Great performance

OPTIONAL EXTRAS REQUIRED (X) FLOATS x 2 TOP-UP BOX LEVEL TRANSDUCER FLOATS x 2 TOP-UP BOX LEVEL TRANSDUCER FLOATS x 2 TOP-UP BOX LEVEL TRANSDUCER FLOATS x 2 TOP-UP BOX LEVEL TRANSDUCER

X X X X X X X X

*Please note, optional extras are not included in the price. Visit our website for pricing.

VOLTAGE

DIMENSIONS h x w x d mm

230V/1Ph

180 x 145 x 75

230V/1Ph

180 x 145 x 75

230V/1Ph

180 x 145 x 75

230V/1Ph

180 x 145 x 75

TOP-UP & LEVEL*

TTC/RCTL

TOP-UP BOX

TTC/TOPUPBOX

N/A

24VDC

240 x 190 x 90

LEVEL TRANSDUCER

N/A

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 189

CONTROL SYSTEMS - 10

Control Systems MICRO CONTROL PANEL

The Libra Micro offers the features and functions of our renowned hard-wired control panels but with a compact, PCB based design. The Libra Micro can be used in conjunction with various liquid level detection devices, such as our FLO range of float switches, WaterVole level sensors and conductivity probes.

FEATURES

– Motor control up to 9.3A full load current – Mains on indicator with mains fail fault output via the volt-free fault relay – Pump operating indicator(s) – Indication of next duty pump (on the dual version) – Pump(s) individually fused – Suitable for FLO range float switch, WaterVole or conductivity probe level control – Volt-free contact for remote monitoring of high-level/power failure alarm – Sensitivity adjustment for WaterVole or conductivity probe use – Compact weatherproof enclosure, IP66 rating – Audible alarm with mute button – 12V.DC output for a remote beacon – ‘Test’ button facility for both pump and high-level alarm – Volt-free contact for remote monitoring for pump(s) fault

BENEFITS

– British design and manufacture – Built for reliability – Small and compact TYPE

CODE

WEIGHT kg

DIMENSIONS h x w x d mm

DOL / ASD

MAX FLC (A)

SINGLE / DUAL

VOLTAGE

Single 230V 1phase DOL TTC/LIBMIC-S

0.8

130 x 145 x 60

DOL

9.3

Single

230

Dual 230V 1phase DOL

TTC/LIBMIC-D

0.8

130 x 145 x 60

DOL

9.3

Dual

230

RED BEACON

MAX/X80-02

0.2

MIDI CONTROL PANEL

COMING SOON!

DELIVERY STATUS SCAN TO SHOP ONLINE

Libra Midi offers the features and functions of our renowned hard-wired control panel but with a combination of PCB & compact control gear. Libra Midi can be used in conjunction with 1-phase and 3-phase motors rated up to 12A full load current and controlled using various liquid level detection methods, such as our FLO range of float switches, WaterVole level sensors, pressure switches and conductivity probes.

FEATURES

– Overload protection – Motor operational hours on the front display – Manual or automatic control via selector buttons – Manual or remote reset possible – Various operational LEDs for status – Detects present phase on 3Ph version – Alternating duty, the PCB switches between which motor should start, based on the motor health and hours on – Sensor types available for automatic motor control are below: • Floats • Conductivity probes • T-T WaterVole • Pressure transducer / Ultrasonic transducer – Various operational modes are available

BENEFITS

– British design – Multi-purpose, compact PCB design – IP66 enclosure – 230V and 400V version available – End-user can choose which level sensor best suits their system – Cost effective & reliable

SCAN TO SHOP ONLINE

ttpumps.com 190

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

BESPOKE CONTROL PANELS

DID YOU KNOW? WE MANUFACTURE CUSTOMISED CONTROL PANELS T-T Controls are specialists in designing, manufacturing and installing control systems for a wide selection of applications, varying in size and complexity. We pride ourselves on our reputation for high standards, quality and client satisfaction. We prioritise every organisation’s unique requirements for control panel design and automation. Whether you need controls for a manufacturing facility or a power distribution system, a simple starter panel or a full complex industrial process with variable speed drives – our experienced team will collaborate with you to develop a bespoke solution.

WHAT WE OFFER: – In-house sales and design team equipped with the latest technology – Skilled and qualified personnel and installation teams – Rigorous inspection and testing to ISO9001, meeting current standards – Complementary range of ancillary products such as telemetry

FROM CONCEPT TO DESIGN, WE MANAGE THE FULL PROJECT. WHAT HAVE WE SUPPLIED? Custom Control Panels for Humanitarian Project in Congo T-T Controls customised two control panels to operate pumps within the Democratic Republic of the Congo in Africa, providing water to two nearby villages. Both panels were single 3Ph Direct On Line starters and included a variety of protective devices specifically for environmental risk factors, such as lightning and surge protection, to ensure the efficient and uninterrupted running of the pumps. In order to overcome the geographical restrictions, the system provided was designed to work via solar power PV rays with battery storage.

Bespoke Controls for International Food Manufacturing Company Bespoke control panel construction was the ideal solution for an international food manufacturing company in the U.S. who needed the panels for their newly commissioned factory. Due to food hygiene requirements the panels were constructed in stainless steel and to IP65-rated water resistant specifications, allowing for easy cleaning and maintenance. The control units were also customised to comply with local safety regulations, specifically the Underwriters Laboratory American standard.

SCAN TO ENQUIRE NOW

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 191

CONTROL SYSTEMS - 10

Control Systems

CONTROL SYSTEMS - 10

Control Systems MAXI - STANDARD DOL / ASD CONTROL

Our most popular and versatile range of Standard DOL / ASD control panels. The Libra range offers an extensive choice of single and dual motor control options suitable for 1Ph 230V and 3Ph 400V power supplies. Available in direct on line (DOL), or star-delta (ASD) starting for larger motors and with various optional extras enabling customisation to suit your requirements, including telemetry monitoring. All control panels are manufactured at T-T’s premises by a team of skilled wire-personnel, with each panel passing rigorous inspection and testing prior to despatch.

VOLTAGE 230V/1Ph 400V/3Ph 400V/3Ph 400V/3Ph 400V/3Ph 230V/1Ph 400V/3Ph 400V/3Ph 400V/3Ph 400V/3Ph 400V/3Ph 400V/3Ph 230V/1Ph

SINGLE / DUAL SINGLE SINGLE SINGLE SINGLE SINGLE DUAL DUAL DUAL DUAL DUAL DUAL DUAL DUAL

DOL /ASD DOL DOL DOL ASD ASD DOL DOL DOL DOL ASD ASD DOL DOL

DIMENSIONS h x w x d mm 400 x 400 x 250 O/A 400 x 400 x 250 O/A 500 x 400 x 250 O/A 500 x 400 x 250 O/A 500 x 400 x 250 O/A 500 x 400 x 250 O/A 500 x 400 x 250 O/A 500 x 400 x 250 O/A 700 x 500 x 300 O/A 700 x 500 x 300 O/A 700 x 500 x 300 O/A 600 x 400 x 250 O/A 600 x 400 x 250 O/A

MAX / FLC (A) 12 12 32 18 32 12 12 18 32 18 32 22 18

WEIGHT kg 11.4 11.2 12 13 13 19 18.5 18.5 19 21 21 23 22

CODE

DELIVERY STATUS

TTC/LIBMAX1MD12 TTC/LIBMAX1TD12 TTC/LIBMAX1TD32 TTC/LIBMAX1TA18 TTC/LIBMAX1TA32 TTC/LIBMAX2TA32 TTC/LIBMAX2TD12 TTC/LIBMAX2TD18 TTC/LIBMAX2TD32 TTC/LIBMAX2TA18 TTC/LIBMAX2MD12 TTC/LIBMAX2TD12T* TTC/LIBMAX2MD12T*

Please note: FLC rating for each product is maximum. SEER MONITORING

*Complete with Seer cloud-based telemetry / data logging.

Available pre-built in certain panels, speak to our sales team for more information.

OPTIONAL EXTRAS FOR YOUR LIBRA PANEL

- Our Libra panels are fully customisable to your requirements by adding any of the below additional options to your panel. - Option choice: Same day despatch is available on panels with no options or options 1 or 2 fitted. - Panels with customised options selected will be offered on a next day basis. CODE

OPTIONAL EXTRAS OPTION 1 – COMMON ALARM BEACON (SUPPLIED LOOSE OR FITTED) OPTION 2 – COMMON AUDIBLE ALARM MUTE OPTION 3 – MCB 1PH MOTOR PROTECTION (PER PUMP) OPTION 3 – MCB 3PH MOTOR PROTECTION (PER PUMP) OPTION 4 – AMMETER AND HOURS RUN METER (PER PUMP) OPTION 5 – FUSED TELEMETRY SUPPLY (1PH)

DELIVERY STATUS

TTC/MAX/OPT1-ALL TTC/MAX/OPT2-ALL TTC/MAX/OPT3-1PH TTC/MAX/OPT3-3PH TTC/MAX/OPT4-ALL TTC/MAX/OPT5-ALL

NOTES FOR PANEL SELECTION - The Amps rating stated on each panel is maximum, we ask for the full load current in Amps upon receipt of order to ensure we select the correct overloads for your panel - Panels are suitable for indoor use only - Orders must be placed by 1pm for same day despatch - Motor starter capacitors may require additional control gear which will be an extra cost

ttpumps.com 192

+44 (0) 1630 647200

Same day dispatch.

SCAN TO SHOP ONLINE

Lead time may apply.

MAXI - STANDARD DOL / ASD CONTROL

BENEFITS

APPLICATIONS

– British design and manufacture – Extensive choice – Market-leading readily available components used – Supplied with clear & concise schematics – Unrivalled technical and after sales support – Each panel comprehensively tested under load conditions – Full test report data available (upon request) FEATURES DOOR-INTERLOCKED ISOLATOR LOW VOLTAGE CONTROL CIRCUIT (24V) MOTOR PROTECTION FUSE CARTRIDGES CONTRACTOR AND THERMAL OVERLOAD RELAY HAND-OFF/RESET AUTO SELECTOR SWITCHES (SPRING RETURN IN HAND TO PREVENT DRY RUNNING) RUN AND TRIP LED INDICATORS SELF REGULATING CONTROLLED ANTI-CONDENSATION HEATER DISTRIBUTION TERMINALS SUITABLE FOR SINGLE ACTING AND DIFFERENTIAL LEVEL CONTROL/PRESSURE SWITCHES DUTY STANDBY OR DUTY ASSIST OPERATION SELECTABLE ON DUAL VERSION SEPARATELY FUSED ALARM CIRCUIT (WARNING ALARMS REMAIN OPERATIONAL SHOULD THE CONTROL FUSE PROTECTION BLOW) FULLY COMPATIBLE WITH OUR SEER TELEMETRY AND MONITORING PRODUCTS REMOTE PUMP RESET VIA OUR SEER RANGE OF TELEMETRY HIGH LEVEL ALARM INDICATOR VOLT FREE MONITORING CONTACTS FOR PUMP TRIP AND HIGH LEVEL ALARM ALTERNATIVE DUTY CYCLE FOR EVEN WEAR ON MOTORS COMMON WARNING BEACON FOR PUMP TRIP OR HIGH LEVEL (SUPPLIED LOOSE OR FITTED) COMMON AUDIBLE WARNING ALARM, MUTE PUSH BUTTON AND TERMINALS FOR REMOTE ALARM MOTOR PROTECTION CIRCUIT BREAKERS (PER PUMP) AMMETER AND HOURS RUN METER (PER PUMP) FUSED TELEMETRY SUPPLY (1PH)

– Pumping systems – Conveyors – Basements – Flood defence – Heating and Ventilation – Motor control – Process machinery

STANDARD NO COST X X X X X X X X X X

OPTIONS 1

X X X X X X X X X X X

CLOUD BASED MONITORING*

Combine our best selling control panel with our state-of-the-art cloud based Seer monitoring units for a complete package.

SEER PORTAL CONTROL SUMP PUMP

SUPPLY

Same day dispatch.

In order to achieve the configuration outlined in this diagram, either A4/ES/2110 or A4/ES/2111 panels must be selected with the additional optional upgrade to Seer monitoring.

LEVEL CONTROL

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 193

CONTROL SYSTEMS - 10

Control Systems

CONTROL SYSTEMS - 10

Control Systems B The Seer Monitoring range is T-T’s comprehensive monitoring solution - an advanced data logger that uses cloud-based technology to monitor your system in real-time. The Seer range consists of four unique units that offer various connection types, notification options and types of data they can receive.

CLOUD TECHNOLOGY

Offering the facility to interrogate and remotely reset through remote pump monitoring, Seer uses the Argos cloud Network via Machine-to-Machine data collection offering superior connectivity whilst ensuring security. Information is received from plants and systems in real-time with a data refresh rate of up to every 10 seconds. Variables are then stored and visually represented via a virtual interactive display via the Seer portal, giving a ‘snapshot’ of the whole system remotely. Alerts via email are configurable for all conditions monitored, with severity levels customisable from a warning, minor, major to critical, which can also be distributed to selectable recipients with options for working, non-working, weekend rota coverage based on daily or weekend calendars. Data is continually available and can be easily retrievable and viewed, allowing comparison over time to predict failures and monitor optional performance trends.

BENEFITS

– Peace of mind 24/7 pump monitoring – Early intervention to prevent detrimental failures – Pictural view of equipment & clear easy to read status information – Remote reset functionality with engineer on-site safety feature (compatible control panels only) – Pro-active maintenance and remote diagnosis of faults – Historical data analysis & performance trends – Easy to navigate the home screen – Capable of producing reports – Diverse range of models available to suit every application

FEATURES

– Live data reporting – Visual representation of equipment/plant – Data logging facility for analysis – Fully customizable alarm notifications day/night – Customisable alarm severity – Site location displayed via Google maps – Remote reset with compatible control panel

Please note: *Not all features available on all units, this is dependent upon existing control system variables and Seer model chosen. Fully customised versions available. For monitoring more complex systems please speak to our sales department for more information. Service Engineers are deployed when live service agreement is in place with credit account facilities.

ttpumps.com 194

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

B SEER ADVANCED SIGNALS* – Power supply – High level – Pump failure pump no.1 pump no.2 – Mains voltage monitoring – Pump current – Pump operating – Pump underload – Wet well level – Remote control – Trip reset – Remote control active

Please note: *Example only, exact signals devised from control system features available

TYPE

PRODUCT CODE

WEIGHT kg

ANALOGUE INPUT

DIGITAL INPUT

DIMENSIONS w x h x d mm

RELAY OUTPUT

VOLTAGE

SEER NANO

TTC/SEERNANO

0.05

None

70 x 70 x 30

None

2x AAA Batteries/3V

SEER MICRO

TTC/SEERMICRO

0.5

110 x 135 x 80

24 VAC

SEER MICRO +

TTC/SEERMICRO+

1.5

180 x 180 x 90

230 VAC

SEER JUNIOR

TTC/SEERJUNIOR

3.5

280 x 280 x 180

230 VAC

SEER ADVANCED

TTC/SEERADVANCED

5.1

280 x 280 x 180

400 VAC

DELIVERY STATUS

SUBSCRIPTION – Seer Nano: No subscription costs – Seer Micro, Micro +, Junior & Advanced: Cloud data hosting and sim (machine to machine) included in pricing for first 12 months – Annual renewal costs (based on 250,000 log points) required to maintain ARGOS cloud subscription after the first 12 months

DATA SIM MACHINE 2 MACHINE DATA SIM UK

TTC/M2MUK

EU & REST OF THE WORLD

TTC/M2MEU+W

UAE

TTC/M2MUAE

Please note: – Machine to machine data SIM required for Seer unit operation – SIMs available for UK, EU & Rest of the World and UAE – See SIM options in table above, which are fixed 2 year contracts

MONITORING SERVICES – We also offer the above product via our monitoring service, giving complete analysis of a system’s operational performance and service requirements 24 hours a day, 365 days a year. Alerts are handled and data is analysed with any notifications raised and resources deployed accordingly. – Full detailed reporting features available. – Our rental option encompasses all charges per annum for Seer unit, data sim and cloud data hosting. Contact our sales department for more information. SCAN TO SHOP ONLINE

Same day dispatch.

SCAN TO WATCH VIDEO

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 195

CONTROL SYSTEMS - 10

Control Systems

CONTROL SYSTEMS - 10

Control Systems VASCO VARIABLE SPEED DRIVE

Vasco is a purpose built range of variable speed drives designed to control and protect pumping systems based on changing the motor frequency and pump speed. Vasco units are extremely compact, can be connected to any pump on the market and will control the operation of the pump to consistently maintain desired pump performance (e.g. pressure, flow, temperature etc.) The easy to configure settings allow the Vasco to determine the most effective duty point for pumps and system. Body construction is entirely aluminium, making the units solid, lightweight and easily cooled. Protected to IP55, the Vasco units can be installed in virtually any location including humid and dusty environments.

FEATURES

– IP55 construction – Start / stop function – Easy to navigate menus – Remote Bluetooth interrogation for fault diagnosis – Overload motor protection – Motor dry-run protection – Motors hours run and running current – Operates multiple DOL motors through one Vasco – Communication between inverters allows them to operate together in ‘cascade’ mode

BENEFITS

SCAN TO SHOP ONLINE

TYPE

VOLTAGE INPUT

VASCO 209 1Ph

1 x 230

VASCO 214 1Ph

1 x 230

1 X 230 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 N/A N/A N/A N/A N/A N/A N/A

ttpumps.com 196

VOLTAGE OUTPUT 1 x 230 3 x 230 1 x 230 3 x 230 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 3 x 400 N/A N/A N/A N/A N/A N/A N/A

RATING amps 9 7 9 11 18 6 9 14 18 25 30 38 48 65 N/A N/A N/A N/A N/A N/A N/A

+44 (0) 1630 647200

TYPICAL POWER P2 (kW) 1.1 1.5 1.1 3.0 4 2.2 4 5.5 7.5 11 15 18.5 22 30 N/A N/A N/A N/A N/A N/A N/A

CODE

DELIVERY STATUS

Same day dispatch.

Lead time may apply.

KIOSKS & ENCLOSURES

Accommodation for your control panel can be provided from an extensive range of kiosks and other enclosures in a variety of materials, including steel with protective coatings, stainless steel, polycarbonate and GRP for outdoor and indoor applications and harsh environments. Space is provided as required for electricity metres and special items such as telemetry units, generator connections and distribution equipment.

FEATURES

– Robust construction – Outdoor or indoor use – Bespoke design and manufacture available – Weatherproof (IP55) – Plywood blackboards for equipment mounting – Can be supplied with heating and lighting requirements – Generator cat flap can be requested optionally

BENEFITS

CONTROL SYSTEMS - 10

Control Systems

– Designed for reliability – Built for long life – Solid build – Popular product

TYPE

DIMENSIONS h x w x d mm

ARRANGEMENT

CODE

GRP

1250 x 750 x 400

SINGLE DOOR

TTC/1250X750GRP

GRP

1250 x 1330 x400

DOUBLE DOOR

TTC/1250X1250GRP

GRP

1750 x 2000 x 500

DOUBLE DOOR

TTC/1750X2000GRP

MILD STEEL

1250 x 750 x 400

SINGLE DOOR

TTC/1250X750MS

MILD STEEL

1250 x 1250 x 400

DOUBLE DOOR

TTC/1250X1250MS

MILD STEEL

1500 x 2000 x 500

DOUBLE DOOR

TTC/1500X2000MS

MILD STEEL

2000 x 2000 x 500

DOUBLE DOOR

TTC/2000X2000MS

DELIVERY STATUS

SCAN TO SHOP ONLINE

INSULATING WALL-MOUNTING ENCLOSURE

Monobloc wall-mounting enclosure made from polyester reinforced with fibreglass, moulded by hot compression for IP66 protection. The enclosures are impact resistance to IK10 for the plain doors and IK08 for the glazed doors of the polyester versions. The enclosures have UL certification 4x and 13 for the polyester wallmounting enclosures and comply with RoHS and REACH Directives.

FEATURES

– High resistance to corrosion in harsh environments, maintaining its mechanical properties and insulation – Door easily reversible by turning it over – Captive Polyamide hinge pin, easily removable – Locking device outside the sealed area, guaranteeing the tightness of IP66 over time – Door opening angle at 180° – Supplied with internal backplate for equipment mounting, and wall fixing brackets

BENEFITS

– Designed for reliability – Built for long life – Solid build – Excellent weather resistant properties

TYPE

DIMENSIONS h x w x d mm

CODE

GLAZED

747 x 536 x 300

TTC / WMTG1GLAZED

GLAZED

847 x 636 x 300

TTC / WMTG2GLAZED

GLAZED

1056 x 852 x 350

TTC/ WMTG3GLAZED

PLAIN

747 x 536 x 300

TTC /WMTG1PLAIN

PLAIN

847 x 636 x 300

TTC/ WMTG2PLAIN

PLAIN

1056 x 852 x 350

TTC /WMTG3PLAIN

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 197

Notes

ttpumps.com 198

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Pumping Stations

SECTION 11 PUMPING STATIONS

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 199

Pumping Stations T-T UTILITY BOX

The T-T Utility Box is a high-quality polypropylene tank intended for collecting water exclusively from domestic drains, including washing machines, showers and sinks. Neatly constructed and with a small footprint, the T-T Utility Box is versatile and easy to install.

12 10 HEAD / m

FEATURES

– Plug and play installation – Internal integral level control – No cable gland on the container – Separate connection for washing machine – Ventilation by integrated active carbon filter – Polypropylene container with 10l usable volume – Audible alarm in case of critical high water level – Pump is fixed to the container lid for ease of maintenance – Fitted with one shower inlet (only 80mm off the floor) – Operating temperature 40°C (short period: up to 90°C) – Pressure outlet 1 ¼” with integrated check valve – Free contact for an external alarm of washing machine stop button PUMP TYPE

PRODUCT CODE

CURVE

T-T UTILITY BOX 1 T-T UTILITY BOX 2 T-T UTILITY BOX 3

TT/UTILITYBOX-1 TT/UTILITYBOX-2 TT/UTILITYBOX-3

A\ B\ C\

PERFORMANCE DATA

8 6 4 2 0

A 0

1.38

2.77

4.16

CAPACITY / l/sec

OUTPUT amp

1.3 3.7 3.7

0.13 0.43 0.43

FREE PASSAGE mm

CABLE LENGTH m 1.5 1.5 1.5

10 10 10

WEIGHT kg

DELIVERY STATUS

15 16 17

SCAN TO SHOP ONLINE

LOOPAK

Loopak is a macerator pump designed to automatically grind and discharge: sewage, toilet paper and greasy water (up to 100°C), originating from either a bathroom or a kitchen. There are three models of the Loopak: THE DOMESTIC - Fitted with a 600 watt motor, suitable for all domestic applications. THE PROFESSIONAL - Equipped with a 1000 watt motor and is designed for the more demanding applications found in offices, hotels, restaurants, pubs and clubs.

30 100

160

210

240

265

290

320

THE PROFESSIONAL PLUS - Fitted with a 600W motor, equipped with a heavy-duty cutting system and designed for the most demanding conditions.

0.83

1.6

4.1

5.8

LOOPAK PROFESSIONAL PLUS

10 8 6 4 2

PROFESSIONAL PLUS MACERATOR PRODUCT CODE

LOOPAK DOMESTIC LOOPAK PROFESSIONAL LOOPAK PROFESSIONAL PLUS

TT/V-S008 TT/V-S007 TT/V-009

200

3.3

PERFORMANCE DATA

PUMP TYPE

ttpumps.com

2.5

CAPACITY / l/sec

FEATURES

– Macerator pump – Extremely versatile – Can be fitted to any European standard w.c.bowl with horizontal discharge – Utilises small 32mm or 40mm discharge pipe – Very easy maintenance; no mess – Motor unit can be serviced or replaced without disturbing toilet and waste connections (only on domestic and professional)

LOOPAK DOMESTIC & PROFESSIONAL

8 HEAD / m

PERFORMANCE DATA

HEAD / m

PUMPING STATIONS - 11

Utility Pumping Stations

+44 (0) 1630 647200

0.55

1.11

1.66

2.22

CAPACITY / l/sec

OUTPUT amp

3 4 2.5

0.6 1.0 0.6

WEIGHT kg 11 12 11

Same day dispatch.

DELIVERY STATUS SCAN TO SHOP ONLINE

Lead time may apply.

Pumping Stations BLUE BOX

The Blue Box range of high-quality polyethylene tanks are extremely versatile and easy to install. They are suitable for collecting clear, rain and wastewater from washing machines, sinks and WCs in systems installed at a lower level than the sewer, such as garages or basements. The entire range uses Blue Pro series pumps. The 60, 90, 150 and 250 models, suitable for domestic and small residential installations, are equipped to house one electric pump. The Blue Box 500 model, intended for civil plants, can be equipped with two electric pumps for complete reliability.

FEATURES

– 60, 90, 150 And 250 models fitted to take one pump; up to two pumps can be installed in 400 model – Direct installation possible for all models; coupler can be used for 250 and 400 models MODEL

CAPACITY l

NUMBER OF PUMPS

– Pedestrian loaded cover – Gasket between tank and cover – Simplified intake, discharge and breather pipe installation with watertight gasket – Three inlet gaskets provided - 50, 65 and 110mm – Integral lifting handles – Emergency drainage fitting located low down in the unit – Patented watertight cable gland allowing easy pump removal – Side fins provide an excellent grip for in-floor installation – Drainage or sewage applications (dependant on pump selection) – Includes standard pipework, 60, 90 and 150 has fixed pipework. Alternative pipework options available for 250 and 500 options using Auto couplings

DISCHARGE mm

WEIGHT kg

PUMPING STATIONS - 11

Utility Pumping Stations

DELIVERY STATUS

TBA DEPENDING ON PUMPS AND PIPEWORK BLUE BOX 60

BLUE BOX 90

BLUE BOX 150

150

BLUE BOX 250

250

BLUE BOX 500

500

SCAN TO SHOP ONLINE

BLUE BOX 500S

The Blue Box 500S is a high-quality polyethylene tank, versatile and easy to install. It is suitable for collecting clear, rain and wastewater from storm drains, washing machines, sinks and WCs in systems installed at a lower level than the sewer. Its large capacity of 400 litres makes it ideal for use in residential and industrial installations. A large number of technical features allow streamlined installation procedures and excellent service with low maintenance. Blue Box 500S can be equipped with up to 2 pumps for systems requiring high flow rates or alternating duty cycles to avoid over-frequent start-ups. Pumps can be installed either inside or outside the tank to suit systems of all kinds.

FEATURES

– High capacity – Can be installed in pairs – Use with high-efficiency Uniqa series pumps – Rugged walkover cover – Emergency drainage fitting located low down in the unit in the event of prolonged blackouts – Slots for floor mounting – Integrated handles – Watertight seals between pipes and Blue Box MODEL

PRODUCT CODE

OUTPUT kW

OUTLET mm

Bluebox E 500S M/ZUG V 065 A

4-9

Bluebox E 500S D/ZUG V 065 A

4-9

Bluebox E 500S T/ZUG V 065 A

4-9

Bluebox E 500S T/ZUG V 080 A

4 - 11

Bluebox E 500S T

7.5 - 18.5

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

SCAN TO SHOP ONLINE

+44 (0) 1630 647200 201

Pumping Stations VORTEX

The Trojan Vortex range of compact pumping stations provides a complete unit supplied with vortex pumps, valves and a control panel, with easy installation and maintenance.

FEATURES

– Polyethylene chamber – Complete unit fitted with high efficiency single / dual vortex pumps – IP68 – fully submersible – 1.1kW, 1.5kW OR 3.0kW options – Mechanical seal within oil bath – DN100 Outlet, 80mm discharge available on request – DN50 or DN100 inlet (55 VS) – DN100 OR DN150 Inlet (150 VD) – Pneumatic level control with LCD display, fault and alarm options available – Max media temperature 55ºC – Integrated non-return valve, 3kW non-return valve external – 180mm minimum inlet height – Supplied with 3.5m cable to motor and 3.5m pneumatic tube connecting Trojan to control unit (IP65 rated)

PERFORMANCE DATA

16 14 12 HEAD / m

PUMPING STATIONS - 11

Above Ground Pumping Station

10 8

6 4

SCAN TO SHOP ONLINE

2 0

A 0

2.7

5.5

8.3

11.1

B 13.8

CAPACITY / l/sec

PUMP TYPE

CURVE

OUTPUT

MAXIMUM

amp

HEAD m

FLOW l/sec

RPM

TANK CAPACITY l

FREE PASSAGE mm

WEIGHT kg

TROJAN 55 VS 1.1 230V

7.6

1.1

8.1

11.3

1400

TROJAN 55 VS 1.1 400V

2.9

1.1

8.1

11.3

1400

TROJAN 55 VS 1.5 400V

3.3

1.5

9.9

13.6

1400

TROJAN 55 VS 3.0 400V

6.2

3.0

9.7

2800

TROJAN 150 VD 1.1 230V

7.6

1.1

8.1

11.3

1400

150

TROJAN 150 VD 1.1 400V

2.9

1.1

8.1

11.3

1400

150

TROJAN 150 VD 1.5 400V

3.3

1.5

9.9

13.6

1400

150

TROJAN 150 VD 3.0 400V

6.2

3.0

9.7

2800

150

130

MANUAL HAND PUMP

N/A

0.65L PER ACTION

N/A

ttpumps.com 202

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

Pumping Stations GRINDER

The Trojan Grinder range of compact pumping stations provide a complete unit supplied with grinder pumps, valves and control panel, with easy installation and maintenance.

FEATURES

– Polyethylene chamber – 55l or 150l capacity – IP68 - fully submersible – Complete unit fitted with high efficiency single / dual grinder pumps – Mechanical seal within oil bath – DN50 or DN100 inlet (55 GS) – DN100 or DN150 inlet (150 GD) – Pneumatic level control with LCD display, fault and alarm options available (IP68 rated) – Maximum media temperature 55ºC – 250mm minimum inlet height – Supplied with 3.5m cable to motor and 3.5m pneumatic tube connecting Trojan to control unit (IP65 rated)

PERFORMANCE DATA

HEAD / m

SCAN TO SHOP ONLINE

25 B

15 10 5 0

0.55

1.11

1.66

2.22

2.77

3.33

3.88

4.44

CAPACITY / l/sec

PUMP TYPE

CURVE

OUTPUT

MAXIMUM

amp

HEAD m

FLOW l/sec

RPM

TANK CAPACITY l

FREE PASSAGE mm

WEIGHT kg

TROJAN 55 GS 1.7/1 230V

10.5

1.7

4.7

2800

8.5

TROJAN 55 GS 1.7/1 400V

3.7

1.7

4.7

2800

8.5

TROJAN 55 GS 1.7/2 400V

3.7

1.7

4.7

2800

8.5

TROJAN 55 GS 3.2/3 400V

6.5

3.2

4.7

2800

8.5

TROJAN 55 GS 3.2/4 400V

6.5

3.2

4.7

2800

150

8.5

TROJAN 150 GD 1.7/1 400V

3.7

1.7

4.7

2800

150

8.5

130

TROJAN 150 GD 1.7/2 400V

3.7

1.7

4.7

2800

150

8.5

130

TROJAN 150 GD 3.2/3 400V

6.5

3.2

4.7

2800

150

8.5

140

TROJAN 150 GD 3.2/4 400V

6.5

3.2

4.7

2800

150

8.5

140

MANUAL HAND PUMP

N/A

0.65L PER ACTION

N/A

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 203

PUMPING STATIONS - 11

Above Ground Pumping Stations

Pumping Stations LARGE VORTEX

The Trojan Large Vortex range of compact pumping stations provides a complete unit supplied with vortex pumps, valves and control panel, with easy installation and maintenance.

FEATURES – Polyethylene chamber – 350L or 480L capacity – IP57 – temporarily submersible – Complete unit fitted with high efficiency single / dual vortex pumps – Mechanical seal within oil bath – DN 150mm inlet and DN100 outlet – Pneumatic level control with LCD display, fault and alarm options available (IP65 rated) – Maximum media temperature 55ºC – Integrated non-return valve – 180mm minimum inlet height – Supplied with 3.5m cable to motor and 3.5m pneumatic tube connecting Trojan to control unit (IP65 rated)

SCAN TO SHOP ONLINE

PERFORMANCE DATA

12 10 8 HEAD / m

PUMPING STATIONS - 11

Above Ground Pumping Station

6 4 A

2 0

2.7

5.5

8.3

11.1

13.8

16.6

19.4

CAPACITY / l/sec

PUMP TYPE

CURVE

OUTPUT

MAXIMUM

amp

HEAD m

FLOW l/sec

RPM

TANK CAPACITY l

FREE PASSAGE mm

WEIGHT kg

TROJAN 350 VS 3.0 400V

6.9

3.0

16.8

1400

350

115

TROJAN 480 VD 3.0 400V

6.9

3.0

16.8

1400

480

205

MANUAL HAND PUMP

N/A

0.65L PER ACTION

N/A

ttpumps.com 204

+44 (0) 1630 647200

Same day dispatch.

DELIVERY STATUS

Lead time may apply.

Pumping Stations CHANNEL

The Trojan Channel range of compact pumping stations provide a complete unit supplied with grinder pumps, valves and control panel, with easy installation and maintenance.

FEATURES – Polyethylene chamber – 480L or 1000L capacity – IP57 – Temporarily submersible – Complete unit fitted with single / dual channel pumps – Up to 100mm Max solids handling – DN150 inlet and DN100 outlet – Pneumatic level control with LCD display, fault and alarm options available (IP65 rated) – Supplied with 3.5m cable to motor and 3.5m pneumatic tube connecting Trojan to control unit

PERFORMANCE DATA

25 20

HEAD / m

SCAN TO SHOP ONLINE

15 10 5 A 0

6.9

13.8

20.8

27.7

34.7

C 41.6

D 48.6

CAPACITY / l/sec

PUMP TYPE

CURVE

OUTPUT amp

MAXIMUM

HEAD m

FLOW l/sec

RPM

TANK CAPACITY l

FREE PASSAGE mm

WEIGHT kg

TROJAN 55 CS 1.7/1 230V

6.9

3.0

33.3

1400

480

8.5

210

TROJAN 55 CS 1.7/1 400V

11.2

4.0

38.8

1400

480

8.5

220

TROJAN 55 CS 1.7/2 400V

12.1

5.5

44.4

1400

480

8.5

225

TROJAN 55 CS 3.2/3 400V

16.9

7.5

45.8

1400

480

8.5

240

TROJAN 55 CS 3.2/4 400V

6.9

3.0

33.3

1400

1000

8.5

370

TROJAN 150 CD 1.7/1 400V

11.2

4.0

38.8

1400

1000

8.5

385

TROJAN 150 CD 1.7/2 400V

12.1

5.5

44.4

1400

1000

8.5

400

TROJAN 150 CD 3.2/3 400V

16.9

7.5

43.8

1400

1000

8.5

425

MANUAL HAND PUMP

N/A

0.65L PER ACTION

N/A

Same day dispatch.

Lead time may apply.

ttpumps.com

DELIVERY STATUS

+44 (0) 1630 647200 205

PUMPING STATIONS - 11

Above Ground Pumping Stations

Pumping Stations PLUTO MICRO The Pluto Micro Pumping Station is designed primarily for smaller foul and surface water applications, basement conversions, cavity wall drainage etc. The T-T Pluto range retains the same robust features as the Planet® range, but in a compact design.

B Drainage Water and Final Effluent Pumps

The fully automatic, single pump system is designed and built for reliability and long life, encompassing a high performance pump range that can be selected to meet your specific application.

10 8 HEAD / m

All our pump stations are designed and manufactured in the UK.

PERFORMANCE DATA

FEATURES

6 4 2 0

1.66

3.33

6.66

8.33

Drainage Water and Final Effluent Pumps

OPTIONAL – Access cover ‘Turret’ to lower the depth of the chamber to suit site requirements

PERFORMANCE DATA

20 18 16 14 12 10 8 6 4 2 0

Trencher 400 0

SCAN TO SHOP ONLINE

Goliath 250

Goliath 150

CAPACITY / l/sec

HEAD / m

– Strong rotomoulded Polyethylene Chamber – Hexagonal shaped chamber body with flat faces to accommodate our range of duct seals and to allow for multiple inlet positions – 1x Ø110mm inlet seal to accommodate standard drainage connections – 1x Ø50mm seal for cable or ventilation duct – Pedestrian rated access frame and cover pre-fitted – 2” BSP discharge connection point – Only available as a single pump system 230v 1Ph or 400v 3Ph – Submersible automatic pump with internal ABS pipework and non-return valve, this system is operated by an integral float switch built into the pump.*Optional: Alert high level alarm, with float bracket kit & FLO102 float. [For 400v 3Ph pump systems, see our Libra Maxi range of control panels]

0.83

1.66

2.5

3.33

4.16

5.8

6.6

7.5

8.33

CAPACITY / l/sec

Sewage Water Pumps PERFORMANCE DATA 15

HEAD / m

PUMPING STATIONS - 11

Package Pumping Station

DG Blue 50 0

DG Blue 75 6

CAPACITY / l/sec

ttpumps.com 206

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Pumping Stations PLUTO The fully automatic unit is designed and built for reliability and long life and employs a high performance pump range that can be selected to meet your specific application. This range can also be used for small, domestic foul waste removal in an annexe or extension. For versatility there is an option for an extension turret of 355mm which can be trimmed to suit site floor levels.

Drainage Water and Final Effluent Pumps PERFORMANCE DATA

12 10 8 HEAD / m

The Pluto Pumping Station is the most effective means for collecting and removing excess water collected from cavity drainage systems.

6 4

FEATURES

2 0

Goliath 250

Goliath 150 0

1.66

3.33

6.66

8.33

CAPACITY / l/sec

Drainage Water and Final Effluent Pumps

HEAD / m

– Strong rotomoulded Polyethylene chamber – Hexagonal shaped chamber body, with flat faces to accommodate our range of duct seals, and to allow for multiple inlet positions – 1x Ø110mm inlet seal to accommodate standard drainage connections – 1x Ø50mm seal for cable or ventilation duct – Pedestrian rated access frame and cover pre-fitted – 2” BSP discharge connection point – Available in single or dual pump configurations, 230v 1Ph or 400v 3Ph – Version 1: Single submersible pump with internal ABS pipework, non-return valve and isolation gate valve. This system is operated by a mains powered control panel (single phase only), featuring indicator light and audible alarm with mute button, via float switches – Version 2: Dual submersible pumps with internal ABS pipework, non-return valve and an isolation gate valve. This is operated by a mains powered dual control panel, (single phase only) featuring indicator light and audible alarm with mute button via float switches. [For 400v 3Ph pump systems, see our Libra Maxi range of control panels]

PERFORMANCE DATA

20 18 16 14 12 10 8 6 4 2 0

Liberator 400

Trencher 750 Trencher 400

0.83

1.66

2.5

3.33

4.16

Liberator 750 5

5.8

6.6

7.5

8.33

CAPACITY / l/sec

Sewage Water Pumps

OPTIONAL

PERFORMANCE DATA

SCAN TO SHOP ONLINE

HEAD / m

– Single mains powered pump for automatic operation and charging system – Dual mains powered pumps for duty standby arrangement with dual pump control panel (230V) – Extension turret is available for 355mm extra depth

DG Blue 50 0

DG Blue 100 DG Blue 75 6

DG Blue 150 10

CAPACITY / l/sec

PLUTO WITH EXTENSION TURRET

Please note: Factory fit only - no retrofit

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 207

PUMPING STATIONS - 11

Package Pumping Stations

Pumping Stations PLUTO MAXI

The fully automatic system, available in a single pump configuration, is designed and built for reliability and long life, encompassing a high-performance pump range that can be selected to meet your specific application. We can also offer this system in a sewage water configuration utilising a sewage ball valve.

Drainage Water and Final Effluent Pumps PERFORMANCE DATA

12 10 8 HEAD / m

The extended Pluto range of BBA-approved package pumping stations is designed primarily for final effluent treatment plants, smaller foul and surface water applications, basement conversions and cavity wall drainage - available as 1.3m deep. T-T’s Pluto Maxi Plus has the same robust features as the Planet® Range.

6 4

All our pump stations are designed and manufactured in the UK.

FEATURES

Goliath 250

Goliath 150 0

1.6

3.3

5.0

6.6

8.3

CAPACITY / l/sec

Sewage Water Pumps PERFORMANCE DATA 15

HEAD / m

– Strong 1.3m deep rotomoulded Polyethylene Chamber – Hexagonal-shaped chamber body with flat faces to accommodate our range of duct seals and to allow for multiple inlet positions – 1x Ø110mm inlet seal to accommodate standard drainage connections – 1x Ø50mm seal for cable or ventilation duct – Pedestrian-rated access frame and cover pre-fitted – 2” BSP discharge connection point – Supplied as a single pump system 230v 1Ph or 400v 3Ph (Dual configuration on request) – Version 1: Submersible automatic pump with internal ABS pipework, heavy-duty hose and non-return valve - this system is operated by an integral float switch built into the pump. *Optional: Alert high-level alarm, with float bracket kit & FLO102 float – Version 2: Submersible pump with internal ABS pipework, heavyduty hose and non-return valve - this system is operated by a mains powered control panel, (single phase only) featuring indicator light, audible alarm with mute button, via float switches [For 400v 3Ph pump systems, see our Libra Maxi range of control panels]

DG Blue 50 0

DG Blue 100 DG Blue 75 6

DG Blue 150

CAPACITY / l/sec

Drainage Water and Final Effluent Pumps

OPTIONAL – Access cover ‘Turret’ to lower the depth of the chamber to suit site requirements

PERFORMANCE DATA

20 18 16

SCAN TO SHOP ONLINE

14 HEAD / m

PUMPING STATIONS - 11

Package Pumping Station

12 10 8 6 4

Liberator 400

Trencher 750 Trencher 400

0 0

0.83

1.6

2.5

3.3

4.1

Liberator 750 5.0

5.8

6.6

7.5

8.3

CAPACITY / l/sec

Please note: Factory fit only - no retrofit

ttpumps.com 208

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Pumping Stations Package Pumping Stations

PLUTO MAXI PLUS

The fully automatic system, available in a single pump configuration, is designed and built for reliability and long life, encompassing a high-performance pump range that can be selected to meet your specific application. We can also offer this system in a sewage-water configuration utilising a sewage ball valve.

Drainage Water and Final Effluent Pumps

10 8 6

All our pump stations are designed and manufactured in the UK.

FEATURES

2 0

Goliath 250

Goliath 150 0

1.6

3.3

5.0

6.6

8.3

CAPACITY / l/sec

Sewage Water Pumps PERFORMANCE DATA 15

HEAD / m

– Strong 2m deep rotomoulded Polyethylene Chamber – Hexagonal-shaped chamber body with flat faces to accommodate our range of duct seals and to allow for multiple inlet positions – 1x Ø110mm inlet seal to accommodate standard drainage connections – 1x Ø50mm seal for cable or ventilation duct – Pedestrian-rated access frame and cover pre-fitted – 2” BSP discharge connection point – Supplied as a single pump system 230v 1Ph or 400v 3Ph (Dual configuration on request) – Version 1: Submersible automatic pump with internal ABS pipework, heavy-duty hose, and non-return valve - this system is operated by an integral float switch built into the pump.*Optional: Alert high-level alarm, with float bracket kit & FLO102 float – Version 2: Submersible pump with internal ABS pipework, heavyduty hose, and non-return valve - this system is operated by a mains powered control panel, (single phase only) featuring indicator light, audible alarm with mute button, via float switches [For 400v 3Ph pump systems, see our Libra Maxi range of control panels]

PERFORMANCE DATA

HEAD / m

The extended Pluto range of BBA-approved package pumping stations is designed primarily for final effluent treatment plants, smaller foul and surface water applications, basement conversions and cavity wall drainage - available as 2.0m deep. T-T’s Pluto Maxi Plus has the same robust features as the Planet® Range.

DG Blue 50 0

DG Blue 100 DG Blue 75 6

DG Blue 150

CAPACITY / l/sec

Drainage Water and Final Effluent Pumps SCAN TO SHOP ONLINE

PERFORMANCE DATA

20 18 16 HEAD / m

14 12 10 8 6 4

Liberator 400

Trencher 750 Trencher 400

0 0

0.83

1.6

2.5

3.3

4.1

Liberator 750 5.0

5.8

6.6

7.5

8.3

CAPACITY / l/sec

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 209

Pumping Stations B

- Time saving design reducing installation time and costs - Pump chambers are well engineered and manufactured, having passed rigorous and detailed testing, site inspections and factory production control assessment by the British board of Agrément to achieve certification approval - Each pump chamber is made of strong, medium-density polyethylene - Smooth internal walls aid the hygienic disposal of effluents to avoid smells and septicity - Packages come complete with pipework pre-assembled in the chamber, ready for installation into the ground after which the pumps and control equipment are added - All package pumping stations are supplied with controls and a high-level alarm indicator for fully automatic operation

A wide range of submersible pumps can be used for the Package Pumping Stations; we are able to select these from T-T’s complete range, in order to match your requirements. Please see page 62 for the selection questionnaire, which allows us to make the best selection for you.

The Mercury® is ideal for small flows from a single dwelling and where excavation depth is limited.

COMPATIBLE PUMPS - CUTTER 80mm - GRINDER 50mm - VORTEX 50mm/80mm *Dual pumps only available with 50mm Vortex/Grinder.

MERCURY

*Extension turret available on Mercury® Plus.

MERCURY PLUS

IMPORTANT The information given in this publication is for your initial guidance. For each scheme, general arrangement drawings are issued on receipt of order. For your further assistance, more comprehensive details are available, and we will be pleased to provide additional information and advice. Our aim is to provide you with a completely satisfactory solution for your pumping needs.

VENUS® / VENUS® PLUS SINGLE/DUAL* PUMP 1m

The Venus® chamber is the most popular size for use in a single dwelling, toilet block or small office. COMPATIBLE PUMPS - CUTTER 80mm - GRINDER 50mm - VORTEX 50mm/80mm *Dual pumps only available with 50mm Vortex/Grinder. *Extension turret available on Venus® Plus.

SCAN TO WATCH VIDEO

VENUS PLUS

VENUS

SATURN® DUAL PUMP

1.5m

The Saturn chamber is suitable for small housing and industrial/commercial developments, restaurants, small hotels/ nursing homes, caravan sites. ®

- Units can be adapted to suit individual requirements at the manufacturing stage

COMPATIBLE PUMPS

- Packages are available on short lead-times to fit in with tight construction schedules

- CHANNEL 80mm/100mm

- A comprehensive instruction manual is provided

The Jupiter® chamber is suitable for larger developments, hotels, hospital and sewage works. The basic unit is capable of special build modifications to provide capacities up to 15,500 litres and incorporation into schemes with Sewers for Adoption specifications.

2m – 4.5m

- Factory built for rapid and low cost installation

- CUTTER 80mm 100mm - GRINDER 50mm - VORTEX 50mm/80mm/100mm

JUPITER® DUAL PUMP

COMPATIBLE PUMPS - CUTTER 80mm/100mm

2.1m

2.5m – 4.5m

FEATURES

MERCURY® / MERCURY® PLUS SINGLE/DUAL* PUMP

1.2m

The Planet® Range of Package Pumping Stations, designed and manufactured by T-T and approved by the BBA, provide an efficient and economical way of installing a sewage/drainage pumping station.

2.3m

PUMPING STATIONS - 11

Package Pumping Station

- GRINDER 50mm - VORTEX 50mm/80mm/100mm - CHANNEL 80mm/100mm/150mm

ttpumps.com 210

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Pumping Stations TYPICAL DUAL PUMP PACKAGE PUMPING STATION

COVER SLAB BY CLIENT 2-CABLE DUCT INLETS

ISOLATING GATE VALVE

LEVEL CONTROL FLOAT-SWITCHES OUTLET FOR CONNECTION TO RISING MAIN 2 NON-RETURN VALVES PIPEWORK 50mm/80mm/100mm/150mm 3-STANDARD INLET SOCKETS ACCEPT 160mm O/D PIPE (OR 110mm O/D WITH ADAPTOR)

PUMP

CONCRETE SURROUND BY CLIENT

EXTENSION TURRET INLET CONNECTION OPTIONAL INLET PIPE IN 3 POSITIONS

INLET

OPTIONAL INLET PIPE IN 3 POSITIONS

INLET

DISCHARGE

INLET

Same day dispatch.

Lead time may apply.

The extension turret is an innovative design that allows the installer to change the chamber installation depth to suit site specific levels. The previous range was restricted to the station design depth only, however T-T have witnessed that, due to site complications and requirements, it would be useful to be able to extend the depth of the tank. The extension turret is placed on top of the tank, clamped and sealed in place, and can be cut at set increments to adjust the height of the pumping station chamber to suit requirements. Please note: The extension turret is available on the Mercury Plus and Venus Plus models.

ttpumps.com

+44 (0) 1630 647200 211

PUMPING STATIONS - 11

Package Pumping Stations

Pumping Stations PUMPING STATIONS - 11

Package Pumping Station

and XL The XL & XXL Planet® Range of Package Pumping Stations are designed and manufactured by T-T, providing an efficient and economical way of installing a sewage/drainage pumping station.

FEATURES

- Designed and manufactured in the UK - Pump stations are well engineered and manufactured, having passed rigorous and detailed testing, site inspections and factory production control assessment - Each pump chamber is made of strong GRP - Smooth internal walls aid the hygienic disposal of effluents to avoid smells and septicity - Packages come complete with pipework pre-assembled in the chamber ready for installation into the ground, after which the pumps and control equipment are added - All package pumping stations are supplied with controls for fully automatic operation, with a high-level alarm indicator as standard - Units can be adapted to suit individual requirements at manufacturing stage - Packages are available on short lead-times to fit in with tight construction schedules - A comprehensive instruction manual is provided

To avoid the need for expensive additional storage solutions, T-T offers a range of extra large (XL) and extra, extra large (XXL) pumping stations, catering to your emergency storage requirements within a single preformed unit. When effluent needs to be discharged to the local sewer network at a reduced weight (due to capacity/saturation), the XL and XXL range of package pumping stations can provide a single solution to hold/store flows and discharge at the permitted rate.

XL WITH PUMP SUMP

A wide range of submersible pumps can be used for the Package Pumping Stations; we are able to select these from T-T’s complete range in order to match your requirements. The XL and XXL range are also available without a sump.

XXL WITH PUMP SUMP

APPLICATIONS - Domestic - Commercial - Industrial IMPORTANT The information given in this section is for your initial guidance. For each scheme, general arrangement drawings are issued on receipt of order. For your further assistance, more comprehensive details are available and we will be pleased to provide additional information and advice. Our aim is to provide you with a completely satisfactory solution for your pumping needs.

ttpumps.com 212

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Pumping Stations B

and XL MODEL REF

CHAMBER INTERNAL INTERNAL EXTERNAL EXTERNAL WITH SUMP SIZE DIAMETER LENGTH DIAMETER LENGTH PUMP HEIGHT LITRES mm mm mm mm mm

10000

2200

3100

2400

3300

2900

12500

2200

3750

2400

3950

2900

15000

2200

4420

2400

4620

2900

17500

2200

5070

2400

5270

2900

20000

2200

5730

2400

5930

2900

22500

2200

6390

2400

6590

2900

25000

2200

7050

2400

7250

2900

27500

2200

7710

2400

7910

2900

30000

2200

8370

2400

8570

2900

35000

2200

9680

2400

9880

2900

40000

2200

1100

2400

11200

2900

XXL

25000

3200

3760

3450

4010

3900

XXL

30000

3200

4390

3450

4640

3900

XXL

32500

3200

4700

3450

4950

3900

XXL

35000

3200

5010

3450

5280

3900

XXL

37500

3200

5320

3450

5570

3900

XXL

40000

3200

5830

3450

5880

3900

XXL

42500

3200

5940

3450

6190

3900

XXL

45000

3200

6250

3450

6500

3900

XXL

47500

3200

6560

3450

6810

3900

XXL

50000

3200

6870

3450

7120

3900

XXL

55000

3200

7500

3450

7750

3900

XXL

60000

3200

8120

3450

8370

3900

XXL

65000

3200

8740

3450

8990

3900

XXL

70000

3200

9370

3450

9620

3900

XXL

75000

3200

9990

3450

10240

3900

XXL

80000

3200

10610

3450

10880

3900

XXL

85000

3200

11230

3450

11480

3900

XXL

90000

3200

11650

3450

12100

3900

TYPICAL DUAL PUMP PACKAGE PUMPING STATION COVER SLAB BY CLIENT

GALVANISED ACCESS COVER

CONCRETE SURROUND BY CLIENT

OPTIONAL EXTERNAL INLET PIPEWORK ACCEPTS 160mm O/D PIPE (OR 110mm O/D WITH ADAPTOR)

ISOLATION GATE VALVE OUTLET FOR CONNECTION TO RISING MAIN 2 NON-RETURN VALVES

INLET SOCKETS AVAILABLE POSITIONS TO BE DETERMINED

DUAL OR TRIPLE PUMPS WITH THE OPTION OF SEPARATE OR COMBINED DISCHARGE PIPES. PIPEWORK OPTIONS: 50mm/80mm/100mm/150mm/200mm

Same day dispatch.

Lead time may apply.

LEVEL CONTROL FLOAT-SWITCHES

ttpumps.com

+44 (0) 1630 647200 213

PUMPING STATIONS - 11

Package Pumping Stations

Pumping Stations PUMPING STATIONS - 11

Adoptable Pumping Station

ADOPTABLE PUMPING STATIONS STAGES FROM CONCEPT TO ADOPTION DESIGN

MAINTENANCE PERIOD

ADOPTION

Post receipt of order, a full set of mechanical and engineering drawings will be prepared for submission to the appropriate water authority.

The mechanical and electrical equipment provided in our pumping systems are offered with a 12 month warranty as standard against any defective parts/ faults. Unfortunately this does not include blockages, misuse or vandalism. Extended warranties can be offered on request.

We are familiar with the requirements of all Utility Companies, enabling us to provide the correct equipment to meet the needs of your particular scheme.

EQUIPMENT MANUFACTURING Once design approval has been obtained, the final manufacturing stage will commence for the pumps, control system, pipework, valves and ancillary equipment – a bespoke arrangement to your site’s specific requirements. Lead times are kept to a minimum. Due to the in-house manufacturing of most equipment and our large stock-holding, there is no need for external resources.

Commissioning visits are followed up by our Service department with an offer of a maintenance contract. Our scheduled inspections and servicing reduce the risk of costly and avoidable breakdowns for your peace of mind. Service visits can be tailored to meet your needs and can be adjusted as necessary.

T-T will control the adoption process from concept through to adoption on your behalf, ensure a smooth handover to the Utility Company that incorporates all documentation from a design package to operating and maintenance manuals. Pre-handover inspections are a standard feature of our service, liaising with the Adoptions Engineers to ensure a smooth and uninterrupted handover.

INSTALLATION All installation work is carried out by our own highly trained and skilled installation teams who have the necessary combined electrical/mechanical skills to install pumping stations. A full installation report is left with the developers’ site representative, detailing any items which need attention related to the civil work or the M&E installation prior to commissioning. COMMISSIONING Our commissioning engineers will undertake a full check of the installation, ensuring that it is safe and meets all of the required standards. A full installation report will be given and a certificate of electrical completion is also issued once all equipment has been commissioned. ADOPTION We are familiar with the requirements

ttpumps.com 214

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Pumping Stations PUMPING STATIONS - 11

Adoptable Pumping Stations

ADOPTABLE PUMPING STATIONS STAGES FROM CONCEPT TO ADOPTION WHAT IS PUMPING STATION ADOPTION?

CONCEPT TO PROJECT

DESIGN

The basis of Pumping Station Adoption is to ensure that the developer builds to a required standard and quality. To achieve ‘adoption’ of a pumping station the systems specification, build and installation need to be compliant with Local Water Company specifications and DCG (Design Construction Guidance). DCG is published by Water UK, they are the standards for the design and construction of sewers within the UK.

We like to be involved at the early stages to advise on the most effective way to position and construct the pumping station as well as the most economical solution. Each client will receive a single specialist to liaise with on a day-to-day basis who will manage the project.

In-house design facilities are used, incorporating the latest technology to create full design and manufacturing drawings, these will be specific to your project.

TENDER/QUOTATION/ORDER A competitively priced service is offered that will meet with your criteria, with no additional hidden costs. On receipt of official instruction to proceed you will receive an agreed programme of works.

Having this feature in-house allows us greater flexibility to respond to design updates and amendments. During the design process we will, if required, communicate with the Water Company and the developers’ design team to ensure that all aspects of the pumping station are comprehensively covered.

Scottish Water Northumbrian Water H.Q. Woore Cheshire

United Utilities Water Yorkshire Water Anglian Water Severn Trent Water Welsh Dwr Cymru Water Thames Water Southern Water Wessex Water South West Water

PUMPING STATION ADOPTION For housing developments, it’s both practical and cost-effective to construct a wastewater and sewage pumping station that can be ‘adopted’ by the local water company – eliminating the developers’ responsibility for future maintenance and running costs. Having worked with all Water Companies over the years, T-T are fully aware of their requirements, expectations and current legislation. This enables us to ensure that your project runs smoothly and that the station is adopted within the fastest and most cost-effective time frame.

NAVS • Icosa Water Services Ltd • Independent Water Networks Ltd • Leep Networks (Water) Ltd and many more...

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 215

Pumping Stations PUMPING STATIONS - 11

Adoptable Pumping Station

ADOPTABLE PUMPING STATIONS

VALVE CHAMBER TO HOUSE VALVES AND ENABLE SAFE MAINTENANCE

ACCESS COVER ALLOWS ACCESS FOR REMOVAL OF PUMPS WHILST KEEPING WET WELL SECURE GATE VALVE AND SWING CHECK VALVE TO CONTROL OUTGOING FLOWS LEVEL CONTROL INLET CHAMBER AND PENSTOCK VALVE

PIPEWORK GENERALLY IN DUCTILE IRON AND SIZED SPECIFICALLY FOR EACH SITE

TO ENABLE CONTROL OF INCOMING FLOWS FROM SITE

WET WELL CHAMBER TO HOUSE PUMPS AND PIPEWORK GUIDERAIL FOR SAFE REMOVAL OF PUMPS FROM THE WET WELL

READY SUMP PREFORMED BENCHING UNIT REDUCING LABOUR INTENSIVE PROCESS OF MANUALLY BENCHING WET WELL AND GUARANTEEING CONCRETE FINISH

AUTO-COUPLING FOR EASY INSTALLATION OF PUMPS PUMPS IN ACCORDANCE WITH SEWERS FOR ADOPTION REQUIREMENTS AND TO ACHIEVE THE REQUIRED FLOW RATE

WHY CHOOSE T-T? T-T ARE A ONE-STOP SHOP We handle the whole process from initial enquiry to final installation, to commissioning and handover. We have six divisions, T-T Pumps, T-T Controls, T-T Flow, T-T Agricultural and Environmental, T-T Pumping Stations and T-T Service. This means that we can utilise each division’s expertise to supply the best possible products supported by years of experience and knowledge. NO SUB-CONTRACTING T-T handles the whole process, this means we do not need to rely on sub-contractors to complete any stage of the work. Therefore we can guarantee lead times to project completions. IN-HOUSE DRAWING AND MANUFACTURING T-T have a dedicated design team who have the capabilities to complete drawings on 2D CAD and 3D solid works. This means we have full control over the design of the pumping station and can ensure this suits the site design. COMPLETE PROCESS GUIDANCE T-T ensures our clinets are guided through the complete process, we ensure we give our clients the support they need to complete projects, while handling all the elements we need to ourselves.

ttpumps.com 216

PRE INSTALLATION INSPECTIONS We will visit your site for a pre-installation check. We do this to make sure the site is ready for our installation team and to avoid any delays or complications during the installation process. DETAILED DRAWINGS AND REPORTS You will receive detailed drawings and reports, allowing you to effectively plan and incorporate your pumping station into the project management process. LARGE STOCK HOLDING T-T has a large stock holding of chambers, pumps, valves and ancillary equipment; meaning we can supply equipment to tight deadlines and schedules. ESTABLISHED IN 1959 We have many years of experience and are professionals in providing the highest quality equipment which is installed to an extremely high standard.

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Pumping Stations SERVICE SERVICE AGREEMENTS

BENEFITS

TANKERING

COMPLETE PACKAGES

As an owner or operator of a sewage or drainage pumping station, you will want peace of mind that your pumping station operates efficiently, whilst also being environmentally friendly.

- Reduced running costs, including energy and maintenance - Greater life expectancy for pumping equipment - Reduced risk of breakdown - Better plant utilisation and return on capital - Improved environmental conditions - Preferential terms for parts and labour, and priority response for service attendance on-site with a service agreement

We can assist in getting your pumping station tankered and jetted with our tankering partners.

1. Purchase your pumping stations from us. 2. Have it installed by our fully trained mechanical and electrical engineers. 3. Take the worry out of maintaining a pumping station by taking out a T-T Service Agreement.

Our service agreements help to meet these aims and avoid unexpected and costly breakdowns. With our skilled in-house group of experts and on-site engineers, we are able to offer a comprehensive after sales service to a large number of customers, provided by the experienced maintenance team at T-T.

DUTY OF CARE Avoid detrimental flooding by ensuring your pumping station is regularly serviced. The owners and operators of pumping stations have a duty of care to ensure minimal environmental damage.

Let us take the stress away by arranging and co-ordinating this for you. T-T only work with professional companies who we have built up good working relationships with and who we trust. We liaise with the company, book visits, raise purchase orders and pay invoices. We charge a 15% admin fee on top of the tankering company invoice. Please note: We are unable to give accurate quotes for this service as it depends on the time spent on site and disposal amounts.

HEAD OFFICE

WATER TESTING We carry out full water testing backed by full certification for TVC22C, TVC37C, E.coli, Conliforms, Pseudomonas and Legionella.

SERVICE

NATIONWIDE COVERAGE

T-T LEVEL ONE

T-T LEVEL TWO

T-T LEVEL THREE

The standard package includes two services per year for dual stations and one service per year for a single station.

This package includes all the standard package benefits plus our Seer monitoring services. Our monitoring service ensures your station is monitored by T-T 24/7.

Our premier agreement includes two services per year, all parts plus one pump per year if required, plus two breakdown call outs.

T-T LEVEL ONE STANDARD

T-T LEVEL TWO ADVANCED

T-T LEVEL THREE PREMIER

Comprehensive service of pumping equipment as per our example service schedule Return of any failed pumps to our workshop for quotation of repair or replacement Full comprehensive service reports Priority breakdown charged at our standard hourly rate 15% discount on all T-T products for the site registered on the Service Agreement Arrangement of tankering with our partners (15% administrator fee) Monitoring of pumping station, including weekly status reports and advice on failures (subject to conditions of our out of hours contract)

*Optional

One pump replacement if required Two breakdowns, one T-T pump and all T-T parts (only available on T-T installed stations)

Please note: *Monitoring available on all Level 3 agreements

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 217

PUMPING STATIONS - 11

Additional Services

Pumping Stations PUMPING STATIONS - 11

Additional Services

CONTINUED PROFESSIONAL DEVELOPMENT Since 1959 T-T have been dedicated to making fundamental information surrounding pumps, valves, controls, pumping stations and environmental equipment accessible to all. Our RIBA-approved Pumping Stations CPD brings you comprehensive pump station knowledge, available from the comfort of your own office (or ours!). The CPD Seminar – approximately 45 minutes long and delivered by our expert technicians – is interactive and informative, focusing on a variety of pumping station topics.

HOW TO BOOK A RIBA APPROVED CPD WITH T-T We can present a RIBA CPD at a time and location to suit you, such as an on-site lunch and learn package or virtual seminar via Teams. You can book a CPD with us in a number of ways: 1. Visiting: https://www.ttpumps.com/request-cpd-seminar 2. Calling +44 (0) 1630 647200 3. Completing the form below and sending it to T-T Pumps Ltd, Onneley Works, Newcastle Road, Woore, Cheshire, CW39RU.

Our RIBA approved CPD gives you the knowledge you need for pumping station selection. The CPD looks at the difference between private and adoptable pumping stations. It details the issues that need to be considered when specifying a pumping station in a range of different developments. The CPD covers the following topics: - Functionality of a pumping station - Design considerations - Installation process - Operation

SCAN TO REQUEST A CPD

- Maintenance and after-care - Relevant statutory issues

BOOKING FORM: RIBA CPD FIRST NAME:

LAST NAME:

EMAIL:

TELEPHONE:

PREFERRED DATE AND TIME:

APPROXIMATE NUMBER OF ATTENDEES:

COMPANY NAME:

POST CODE:

DO YOU HAVE ANY PRESENTATION FACILITIES (PROJECTOR AND SCREEN): ADDITIONAL INFORMATION:

ttpumps.com 218

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Notes

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 219

Notes

ttpumps.com 220

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Index

INDEX

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 221

Index # 4HS Range............................................................................................. Section 6 / 120 A Adoptable Pumping Stations.................................................... Section 11 / 214 – 216 AF Flow Mixer Range.............................................................................. Section 5 / 71 AG90 Diesel Transfer Pump................................................................. Section 7 / 131 Alert / Alert Pro................................................................................... Section 10 / 189 AP / AL Range....................................................................................... Section 7 / 133 AP Blue Professional.............................................................................. Section 1 / 16 APG Range.............................................................................................. Section 1 / 17 Aquabrake Anti-Surge Clean Water Air Valve..................................... Section 9 / 170 Aquabrake Mini Clean Water Air Valve One Function......................... Section 9 / 169 Aquavault Resilient Seat Wedge Gate Valve........................................ Section 9 / 150 Aquavault Resilient Seat Wedge Gate Valve with ISO Interface......... Section 9 / 151 Auto-Coupling Accessories.................................................................. Section 8 / 146 Auto-Coupling Sets............................................................................... Section 8 / 145

B Ball Brake.............................................................................................. Section 9 / 164 Bevel Gearbox (Medium)...................................................................... Section 9 / 178 Bevel Gearbox (Small).......................................................................... Section 9 / 178 Bi-directional Knife Gate Valve............................................................ Section 9 / 158 Blue Box.............................................................................................. Section 11 / 201 Blue Box 500S..................................................................................... Section 11 / 201 Booster Sets................................................................................ Section 6 / 108 – 110 Borehole Pumps......................................................................... Section 6 / 113 – 118 Brass Gate Valve................................................................................... Section 9 / 175 Brass Spring Check Valve.................................................................... Section 9 / 176 Brass Spring Check Valve with Strainer.............................................. Section 9 / 176 Brass Swing Check Valve..................................................................... Section 9 / 177

C Camlock Fittings................................................................................... Section 8 / 141 CFS Shredder Series.............................................................................. Section 5 / 84 CM / CMP Series..................................................................................... Section 6 / 89 Compact Wastewater Air Valve.............................................................Section 9 /167 Compactors, Screening & Extractors.................................................... Section 5 / 85 Conversion Kit......................................................................................... Section 3 / 40 Counter Flanges................................................................................... Section 6 / 125 Counterweights................................................................................... Section 10 / 187

D DG Blue Professional.............................................................................. Section 2 / 21 DG Steel................................................................................................... Section 2 / 20 DGG Range.............................................................................................. Section 2 / 26 DGO Range.............................................................................................. Section 2 / 22 DGX Stainless Steel................................................................................ Section 2 / 23 Discharge Bends................................................................................... Section 8 / 142 Double Hinge Flap Valve....................................................................... Section 9 / 165 DR Blue Professional............................................................................. Section 1 / 11 DR Bronze............................................................................................... Section 1 / 13 DR Steel..................................................................................................... Section 1 / 9 DRG Range.............................................................................................. Section 1 / 14 DRO Range.............................................................................................. Section 1 / 12 DRY Range............................................................................................... Section 1 / 15 Ductile Iron Pipes & Fittings................................................................ Section 9 / 182 Duckfoot................................................................................................ Section 8 / 145

ttpumps.com 222

+44 (0) 1630 647200

E E-Flow Range.......................................................................................... Section 2 / 27 Eccentric Plug Valve............................................................................. Section 9 / 158 EP Bronze.............................................................................................. Section 7 / 128 EP Stainless Steel................................................................................. Section 7 / 129 Equilibrium Ball Float Valve................................................................. Section 9 / 174 ETO 40...................................................................................................... Section 5 / 74 ETO 65 - 200 Range................................................................................ Section 5 / 75 ETV Range............................................................................................... Section 5 / 76 Extension Spindles............................................................................... Section 9 / 180

F F4 Metal Seat Wedge Gate Valve PN16............................................... Section 9 / 156 F4 Resilient Seat Wedge Gate Valve PN16.......................................... Section 9 / 156 Fast Acting Relief Valve........................................................................ Section 9 / 173 FC Range................................................................................................. Section 6 / 90 Flexible Couplings................................................................................ Section 8 / 140 Flexible Hoses....................................................................................... Section 6 / 122 Float Switch - Economy Option.......................................................... Section 10 / 186 Float Switches..................................................................................... Section 10 / 187 Floaway.................................................................................................. Section 9 / 166 Floodbuddy.............................................................................................. Section 3 / 46 Flush Valve............................................................................................ Section 8 / 142 FS 98 - 4” Range................................................................................... Section 6 / 114

G Gearboxes.....................................................................................Section 9 / 178 - 179 Goliath Super.......................................................................................... Section 1 / 10 GR Blue Professional.............................................................................. Section 2 / 32 Grey Range...................................................................................... Section 2 / 24 – 25 GRG Grinder Range................................................................................ Section 2 / 33 GRI Grinder Range.................................................................................. Section 2 / 33

H Hand Pumps.......................................................................................... Section 7 / 132 HBC Biocell............................................................................................. Section 5 / 82 Hidro Boost............................................................................................ Section 6 / 110 Hidro Break........................................................................................... Section 6 / 109 Hidro Domestic AutoSmart Range...................................................... Section 6 / 108 Hose / Fittings....................................................................................... Section 8 / 138 Hose Couplings..................................................................................... Section 8 / 139 HQX Range.............................................................................................. Section 6 / 97 HX Range................................................................................................. Section 6 / 94

Same day dispatch.

Lead time may apply.

Index I Inline Non Return Valve.......................................................................... Section 3 / 43 Insulating Wall-mounted Enclosure.................................................. Section 10 / 197 Interchangeable Bladders.................................................................... Section 6 / 125 IR Range................................................................................................ Section 6 / 101 Iron50 Diesel Transfer Pump............................................................... Section 7 / 130 Iron75 Diesel Transfer Pump............................................................... Section 7 / 131

N NCB/Z Range........................................................................................ Section 6 / 102 NCBK/Z Range...................................................................................... Section 6 / 103 Nipples, Sockets and Bushes.............................................................. Section 8 / 143 NR 151 / NR 152 - 6” Range................................................................. Section 6 / 115 NR 201- 8” Range................................................................................. Section 6 / 116 NR 250 - 10” Range.............................................................................. Section 6 / 117 NS 95 / 96 - 4” Range........................................................................... Section 6 / 113 NSX Range.............................................................................................. Section 6 / 98

J J Range........................................................................................ Section 7 / 134 – 135

K KF Range................................................................................................. Section 6 / 88 Kiosks & Enclosures........................................................................... Section 10 / 197 KT Sand Devil.......................................................................................... Section 3 / 53 KTA Range............................................................................................... Section 3 / 51 KTA/S Range........................................................................................... Section 3 / 52 KTC Range............................................................................................... Section 3 / 50 KTH Range.............................................................................................. Section 3 / 55 KTH/S Range........................................................................................... Section 3 / 54 KTS Range............................................................................................... Section 3 / 48 KTSE Range............................................................................................ Section 3 / 49

L L Range.................................................................................................. Section 6 / 107 Layflat Hose............................................................................................ Section 5 / 83 Liberator.................................................................................................. Section 3 / 40 Liberator Conversion Kit........................................................................ Section 3 / 40 Liberator Stainless Steel........................................................................ Section 3 / 41 Liberator Vortex...................................................................................... Section 3 / 41 Libra Maxi Standard DOL / ASD Control................................. Section 10 / 192 – 193 Libra Micro Control Panel.................................................................. Section 10 / 190 Libra Midi Control Panel.................................................................... Section 10 / 190 Lifting Chain......................................................................................... Section 8 / 148 Loopak................................................................................................. Section 11 / 200 Lugged / Tapped Butterfly Valve.......................................................... Section 9 / 157

M M Range................................................................................................... Section 6 / 91 M Stainless Steel Range......................................................................... Section 6 / 92 Mandals Hose......................................................................................... Section 5 / 83 Metal Seat Gate Valve PN16................................................................. Section 9 / 152 Metal Seat Gate Valve PN16 with ISO Interface.................................. Section 9 / 153 Metal Seat Gate Valve PN16................................................................. Section 9 / 154 Metal Seat Gate Valve PN25................................................................. Section 9 / 155 Metal Seat Gate Valve with Bypass PN16............................................ Section 9 / 154 Metal Seat Gate Valve with ISO Interface PN25.................................. Section 9 / 155 Metal Seat Swing Check Valve PN16................................................... Section 9 / 163 Metal Seat Swing Check Valve PN16................................................... Section 9 / 161 Metal Seat Swing Check Valve Drilled BS10 D/E................................ Section 9 / 162 MK Range.............................................................................................. Section 6 / 100 MSU Mobile Separator .......................................................................... Section 5 / 80 MX Range................................................................................................ Section 6 / 95 MXL Mixer Range.................................................................................... Section 5 / 81 MXO / MXC Range................................................................................... Section 6 / 96 MXT Range.............................................................................................. Section 5 / 84

Same day dispatch.

Lead time may apply.

O OP Range ................................................................................................ Section 6 / 92 Oxygen Range......................................................................................... Section 5 / 69 Oxyplate................................................................................................... Section 5 / 68 Oxytube - Tubular Air Diffusers............................................................. Section 5 / 68

P PalPack.................................................................................................... Section 3 / 45 Penstock................................................................................................ Section 9 / 164 Planet Range Package Pumping Stations.............................. Section 11 / 210 – 213 Plastic Combination Air Valve.............................................................. Section 9 / 172 PLD Piston Pump.................................................................................... Section 5 / 81 Pluto..................................................................................................... Section 11 / 207 Pluto Maxi............................................................................................ Section 11 / 208 Pluto Maxi Plus................................................................................... Section 11 / 209 Pluto Micro.......................................................................................... Section 11 / 206 Pontoon................................................................................................... Section 3 / 56 Pressure Gauge.................................................................................... Section 6 / 122 Pressure Reducing Valve...................................................................... Section 9 / 174 Pressure Switch.................................................................................... Section 6 / 122 Pressure Transducer............................................................................ Section 6 / 122 Pressure Vessels.................................................................................. Section 6 / 124 PT Range................................................................................................. Section 5 / 77 PTH Range.............................................................................................. Section 5 / 78 PTO / PTD Range.................................................................................... Section 5 / 79 Ptronic Electric Pressure Switch......................................................... Section 6 / 123 PTS 40 Chopper Pump........................................................................... Section 5 / 72 ................................................................................................................. Section 2 / 35 PTS 65 – 150 Range........................................................................ Section 5 / 72 – 73 ................................................................................................................. Section 2 / 35 PTS 100K – 200 Range............................................................................ Section 5 / 74 ................................................................................................................. Section 2 / 36 PuddleMate............................................................................................. Section 3 / 46 PuddlePal................................................................................................ Section 3 / 44 Pump Hooks.......................................................................................... Section 8 / 144 Pump Stands......................................................................................... Section 8 / 147 Pump Vole........................................................................................... Section 10 / 188

ttpumps.com

+44 (0) 1630 647200 223

Index R RainCycle Controller........................................................................... Section 10 / 189 RC500 / RC900...................................................................................... Section 6 / 112 Ready Level......................................................................................... Section 10 / 186 Recoil Check Valve................................................................................ Section 9 / 163 Reversing Spur Gearbox....................................................................... Section 9 / 179

V V-Flow Range.......................................................................................... Section 2 / 28 Valve Operating Equipment.................................................................. Section 9 / 180 Vasco Variable Speed Drive.................................................................. Section 6 / 121 ............................................................................................................. Section 10 / 196 VX Range................................................................................................. Section 6 / 99

S S 151 / S 152 - 6” Range....................................................................... Section 6 / 114 S 181 - 8” Range................................................................................... Section 6 / 116 S 252 / S 253 - 10” Range..................................................................... Section 6 / 117 S 302 - 12” Range................................................................................. Section 6 / 118 S 350 - 14” Range................................................................................. Section 6 / 118 Saferise Anti Slam Clean Water Air Valve........................................... Section 9 / 171 Samsump.................................................................................................. Section 1 / 9 SCR Range.............................................................................................. Section 4 / 62 Scum Skimmer....................................................................................... Section 5 / 67 Seer Monitoring........................................................................ Section 10 / 194 – 195 Service................................................................................................. Section 11 / 217 SKD/Z Range............................................................................... Section 6 / 104 – 105 SM Separator.......................................................................................... Section 5 / 80 Smart 10 / Smart 16 / Smart 25........................................................... Section 6 / 123 SMD Range - Diaphgram...................................................................... Section 4 / 63 SP20 / SP21 - ATEX................................................................................. Section 3 / 57 SP35 / SP45............................................................................................. Section 3 / 58 SP55 / SP65............................................................................................. Section 3 / 59 Spur Gearbox........................................................................................ Section 9 / 179 Standard DOL / ASD Panels..................................................... Section 10 / 192 – 193 SST Range - Semi Trash......................................................................... Section 4 / 62 STR Range............................................................................................... Section 2 / 37 Sumpy........................................................................................................ Section 1 / 8 SWB Range.............................................................................................. Section 6 / 95 Swimming Pool Pumps.......................................................................... Section 6 / 93 Swing Check Valve................................................................................ Section 9 / 161 SWT Range – Trash................................................................................. Section 4 / 63

W Wafer Butterfly Valve............................................................................ Section 9 / 157 Washdown............................................................................................... Section 5 / 66 ............................................................................................................... Section 6 / 111 Wastewater Air Valve............................................................................ Section 9 / 168 Water Connection (multiway fitting).................................................... Section 6 / 122 WaterGuard / WaterGaurd Pro........................................................... Section 10 / 188 Wellman Hose....................................................................................... Section 6 / 119 WP25........................................................................................................ Section 3 / 57

T T-Keys.................................................................................................... Section 9 / 180 T-T 100....................................................................................................... Section 1 / 8 T-T 305/T-T505/T-T1510........................................................................ Section 2 / 34 T-T 505C.................................................................................................. Section 3 / 47 T-T Utility Box...................................................................................... Section 11 / 200 T-T Well................................................................................................. Section 6 / 112 T-T 1008 / T-T 1409................................................................................. Section 2 / 34 TBM Mixer Range................................................................................... Section 5 / 70 TBX-E Mixer Range................................................................................. Section 5 / 71 TM / TMB / TMV Range......................................................................... Section 6 / 106 Trencher.................................................................................................. Section 3 / 42 Trencher Slurry Mate............................................................................. Section 3 / 43 Trojan Above Ground Pumping Stations.................................. Section 11 / 202 – 205 Twin Plate Check Valve......................................................................... Section 9 / 165

U Uni-directional Knife Gate Valve with Double Acting Actuator.......... Section 9 / 160 Uni-directional Knife Gate Valve with Handwheel ............................. Section 9 / 159 Uniqa Range ................................................................................... Section 2 / 29 – 31

ttpumps.com 224

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Notes

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 225

Notes

ttpumps.com 226

+44 (0) 1630 647200

Same day dispatch.

Lead time may apply.

Notes

Same day dispatch.

Lead time may apply.

ttpumps.com

+44 (0) 1630 647200 227

LIQUIDS UNDER CONTROL

T-T Pumps Ltd, Onneley Works, Newcastle Road, Woore, Cheshire, CW3 9RU, United Kingdom T-T Controls & Automation, T-T Flow Valves, T-T Pumping Stations, T-T Agricultural & Environmental and T-T Service are Divisions of T-T PUMPS Ltd. T-T PUMPS Ltd: Registered in England & Wales Reg. No 2320012. DATA1781: 31/10/2023.

ttpumps.com

+44 (0) 1630 647200

response@ttpumps.com