Specialists in Bespoke Solutions

Pluto Package Pumping Station

The Pluto Pumping Station is the most effective means for collecting and removing excess water collected from cavity drainage systems.

The fully automatic unit is designed and built for reliability and long life and employs a high-performance pump range that can be selected to meet your specific application. This range can also be used for small, domestic foul waste removal in an annexe or extension.

An optional extension turret (of 355mm) can be trimmed so that your Pluto Pumping station perfectly suits site floor levels, offering versatility.

All our pump stations are designed and manufactured in the UK.

Requires specialist selection. To order call: +44 (0) 1630 647200

Performance Image for Pluto Package Pumping StationView Performance Data
Performance Image for Pluto Package Pumping Station

Need help finding the right solution?

Call our Specialist Advisers +44 (0)1630 647200

Product Information

Pluto Package Pumping Station

Features

  • Strong rotomoulded Polyethylene chamber
  • Hexagonal-shaped chamber body, with flat faces to accommodate our range of duct seals, and to allow for multiple inlet positions
  • 1x Ø110mm inlet seal to accommodate standard drainage connections
  • 1x Ø50mm seal for cable or ventilation duct
  • Pedestrian-rated access frame and cover pre-fitted
  • 2” BSP discharge connection point
  • Available in single or dual pump configurations, 230v 1Ph or 400v 3Ph

Applications

  • Domestic wastewater drainage
  • Basement conversions and cavity wall drainage
  • Final effluent treatment

Options

  • Single mains powered pump for automatic operation and charging system
  • Dual mains powered pumps for duty standby arrangement with dual pump control panel (230V)
  • Access cover extension turret (355mm) - the extension turret is an innovative design that allows the installer to change the depth of the chamber installation to suit site-specific levels. It can be cut at set increments to adjust the height of the pumping station chamber to suit the requirements
  • Version 1: Single submersible pump with internal ABS pipework, non-return valve and isolation gate valve. This system is operated by a mains powered control panel (single phase only), featuring an indicator light and audible alarm with mute button, via float switches
  • Version 2: Dual submersible pumps with internal ABS pipework, non-return valve and an isolation gate valve. This is operated by a mains-powered dual control panel, (single phase only) featuring an indicator light and audible alarm with a mute button via float switches. [For 400v 3Ph pump systems, see our Libra Maxi range of control panels]

Applications

HousingHousing Hotels And CateringHotels And Catering Domestic Waste WaterDomestic Waste Water Commercial DevelopmentCommercial Development Cellar DrainageCellar Drainage

Downloads

You don't have permission to view technical drawings because you're not logged into the website.

Datasheets