WaterGuard - Control Panel
The WaterGuard range offers cost-effective 1Ph pump control with a wealth of user-friendly features particularly suited to removing nuisance water and keeping vulnerable areas dry.
Level detection can be via our WaterVole, PumpVole or Float switch.
Product Information
WaterGuard - Control Panel
Watervole
The WaterVole range of sensors achieves differential in water heights by the chosen mounting orientation of the level sensor, either horizontally or upright in position.
The WaterVole is capable of start/stop levels, and the WaterVole Pro is capable of providing start/stop/high level when used with suitable controllers such as the WaterGuard/WaterGuard Pro and Libra Micro Controller Range.
PumpVole
The PumpVole is intended for use mounted on a submersible pump body, providing adjustable height level control by the integral stainless steel bracket, again operating in conjunction with either our WaterGuard or Libra Micro Controller range.
Please note: The WaterVole range and PumpVole can only be purchased with the WaterGuard/WaterGuard Pro and Libra Micro Controller range.
Features
- PCB design
- Ran on a timer for use with residue pumps
- Adjustable sensitivity on conductivity circuit
- Compact weatherproof enclosure, IP66 rating
- Can control single-phase motors up to 9.3 AMP FLC
- Audible alarm c/w mute configurable for continuous or intermittent use
- LED indication for mains healthy and pump running/ relay active
- Dual voltage input 230V / 110V 1Ph
- Watervole supplied with 10m cable as standard, longer lengths are available upon request
- Volt-free contacts available for remote monitoring
- "Test" button facility
- Single-phase pump control (up to 9.3 AMP)
- Dry run sensor
Applications
- Remote flood monitor/flow sensor
- Automatic residue pump operation
- Server room water detection
Applications
Agriculture
Clean Water Treatment Works
Breweries And Food Processors
Hotels And Leisure
Quarry And Mines
Sewage Treatment Works